Fockety WIFI Control Board for Sliding Gate Opener

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Fockety 2-Channel WIFI Control Board for sliding gate openers. This module enables remote control of your gate via a smartphone application, offering convenience and enhanced access management. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Safety Information

• Professional Installation: Installation should be performed by qualified personnel to prevent electrical hazards and ensure correct operation.
• Power Supply: Ensure the power input to the module does not exceed DC12V. Incorrect voltage can damage the device.
• Environmental Conditions: Protect the module from moisture, extreme temperatures, and direct sunlight.
• Disconnection: Always disconnect power to the gate opener's main control board before installing or servicing the WIFI module.
• Children and Pets: Keep children and pets away from the gate area during operation.

3. Product Overview

3.1. Features

• Remote door opening via smartphone application.
• 2-channel control for versatile gate operation.
• Easy integration with existing gate opener main control boards.
• LED indicators for operational status.
• Supports Tuya APP for smart home integration.

3.2. Technical Specifications

3.3. Product Views

4. Setup

4.1. Before Installation

• Ensure the gate opener's main control board is compatible with a 2-channel WIFI module.
• Verify that a stable 2.4 GHz Wi-Fi network is available at the installation location.
• Download the Tuya Smart application on your smartphone from your device's app store.

4.2. Physical Installation

1. Power Off: Disconnect all power to your sliding gate opener's main control board.
2. Locate Connector: Identify the designated connector port on your gate opener's main control board for accessory modules.
3. Insert Module: Carefully insert the Fockety WIFI Control Board into the corresponding port on the main control board. Ensure it is securely seated.
4. Power On: Reconnect power to the gate opener system.

4.3. App Configuration and Pairing

After physical installation, you need to pair the module with the Tuya Smart app:

1. Initial State: When the module is powered on, observe the LED indicator. If the LED flashes fast, it is ready for direct internet connection.
2. Match Button: If the LED flashes slowly or is off, press and hold the 'Match' button on the module until the LED begins to flash fast. Then release the button.
3. Open Tuya App: Open the Tuya Smart application on your smartphone.
4. Add Device: Follow the in-app instructions to add a new device. Select the appropriate device type (e.g., 'Gate Opener' or 'Switch').
5. Connect to Wi-Fi: The app will guide you to connect the module to your 2.4 GHz Wi-Fi network. Enter your Wi-Fi password when prompted.
6. Completion: Once successfully paired, the LED indicator on the module will typically become solid or flash slowly, indicating a stable connection.

5. Operating Instructions

5.1. Remote Control via Mobile App

The primary method of operation is through the Tuya Smart mobile application:

1. Launch App: Open the Tuya Smart app on your smartphone.
2. Select Device: From the device list, select your connected gate opener module.
3. Send Command: Use the virtual buttons or controls within the app to send commands to open, close, or stop your sliding gate. The app communicates these commands wirelessly to the module, which then controls the gate mechanism.
4. Scheduling and Automation: The Tuya app may offer features for setting schedules or creating automation routines for your gate, depending on the app's capabilities.

5.2. Manual Operation

The gate opener system may retain its original manual operation capabilities. Refer to your gate opener's main manual for instructions on sensitive low-speed manual operation or emergency release procedures.

6. Maintenance

• Keep Dry: Ensure the module and its connections remain dry and free from moisture to prevent damage.
• Cleanliness: Periodically inspect the module for dust or debris and gently clean if necessary.
• Connection Check: Occasionally check that the module is securely connected to the main control board.
• Software Updates: Keep your Tuya Smart app updated to the latest version for optimal performance and security.

7. Troubleshooting

8. Warranty and Customer Support

For warranty information or technical assistance, please refer to the documentation provided with your purchase or contact Fockety customer support through the retailer's platform. Please have your model number (Focketyshgfqmui6a) and purchase details ready when contacting support.