Furologee 36 Inch Small Computer Desk with Hutch & Drawers Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Furologee 36 Inch Small Computer Desk with Hutch & Drawers. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The Furologee 36 Inch Small Computer Desk, featuring a hutch, monitor stand, two fabric drawers, and integrated power outlets with LED lighting.

Important Safety Information

• Always secure the desk to the wall to prevent tipping. This is crucial for stability and safety, especially in households with children or pets.
• Do not place heavy items on the desk that could cause it to tip over. Distribute weight evenly.
• Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as needed.
• Keep small parts away from children during assembly to prevent choking hazards.
• Use the desk on a flat, level surface to prevent wobbling and instability.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer service.

• Desk Frame (Metal)
• Desktop Panel (Engineered Wood)
• Hutch Shelves (2 tiers)
• Monitor Stand
• Fabric Drawers (2 units)
• Power Outlet Unit (2 AC outlets, 2 USB ports)
• LED Light Strip with Remote Control
• Headphone Hooks (2 units)
• Adjustable Feet (4 units)
• Assembly Hardware (screws, bolts, Allen wrench, anti-tip kit)
• Instruction Manual (this document)

Assembly Instructions

Assembly typically requires one person and takes approximately 1 hour. Please follow these steps carefully. While no printed instructions were included in some packages, this guide aims to provide clear steps.

Step 1: Assemble the Base Frame

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify the metal frame components for the desk base.
3. Connect the side frames using the horizontal support bars. Ensure all connections are secure but do not fully tighten screws until the entire frame is assembled.
4. Attach the adjustable feet to the bottom of the desk legs.

Image: Diagram showing the overall dimensions of the desk and its components, including the frame structure.

Step 2: Attach the Desktop and Hutch Frame

1. Carefully place the desktop panel onto the assembled base frame. Align the pre-drilled holes.
2. Secure the desktop to the frame using the provided screws.
3. Attach the hutch frame to the desktop, ensuring it is oriented correctly. Secure with screws.

Step 3: Install Shelves and Monitor Stand

1. Install the lower hutch shelf and the monitor stand onto the hutch frame.
2. Install the top hutch shelf.
3. Ensure all shelves are level and securely fastened.

Image: The hutch provides additional storage space for various items, including a monitor, plants, and books.

Step 4: Integrate Power Outlets and LED Lights

1. Insert the power outlet unit into its designated slot on the desk. Connect the power cord.
2. Attach the LED light strip to the underside of the hutch or monitor stand as desired. Connect it to the power outlet unit.

Image: Close-up of the desk's integrated power strip with two AC outlets and two USB charging ports.

Step 5: Install Fabric Drawers and Hooks

1. Assemble the two fabric drawers by unfolding them and inserting the bottom panel.
2. Slide the assembled fabric drawers into the designated slots beneath the desktop.
3. Attach the metal hooks to the side of the desk frame.

Image: The desk features two large fabric drawers, providing ample storage for various items.

Image: The desk includes two metal hooks on the side, suitable for hanging headphones or bags.

Step 6: Final Tightening and Anti-Tip Kit

1. Once all components are in place, fully tighten all screws and fasteners.
2. Install the safety anti-tip kit by securing the desk to the wall according to the kit's instructions. This is a critical safety measure.

Features Overview

• Integrated Charging Station

  The desk features 2 built-in AC power outlets (120V/12A) and 2 USB charging ports (5V-2A) for convenient device charging. The power cord is 4.9 feet long.

  

  Image: Detail of the integrated power strip with two AC outlets and two USB ports.

• RGB LED Light Strip

  Enhance your workspace with an RGB LED light strip offering 20 adjustable colors, 22 dynamic modes, 5 brightness levels, and 10 flicker frequencies. Controlled via a remote.

  

  Image: The desk illuminated by its RGB LED light strip, with the remote control visible.

• Stable Hutch and Monitor Stand

  The desk includes a hutch with two tiers of shelves and a monitor stand (33.3" x 4.7"). The monitor stand helps raise your screen to eye level, promoting better posture and reducing neck strain.

  

  Image: Close-up of the monitor stand, designed to elevate the screen for ergonomic viewing.

• Fabric Drawers and Hooks

  Two non-woven fabric drawers provide storage for books, cosmetics, and other small items. Two metal hooks on the side offer space for backpacks or headphones.

• Adjustable Feet

  Four adjustable feet ensure the desk remains stable on uneven surfaces and protect your floor from scratches.

Operating Instructions

Using the Power Outlets and USB Ports

• Plug the desk's main power cord into a standard wall outlet.
• Connect your devices to the AC outlets or USB ports as needed.
• Ensure devices are compatible with the provided voltage and current ratings (120V/12A for AC, 5V-2A for USB).

Controlling the LED Lights

• Ensure the LED light strip is properly connected to the power outlet unit.
• Use the provided remote control to power on/off the lights, change colors, select dynamic modes, adjust brightness, and modify flicker frequencies.
• Point the remote control directly at the LED receiver for optimal response.

Maintenance

• Cleaning: Wipe the desk surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Drawers: The fabric drawers can be spot cleaned with a mild detergent and water. Allow to air dry completely.
• Electrical Components: Keep the power outlets and LED lights free from dust and moisture. Do not attempt to repair electrical components yourself.

Troubleshooting

Specifications

Warranty and Customer Support

Furologee provides customer service before and after purchase. The product comes with a limited warranty. If your items received are damaged, scratched, or missing parts, please contact us at any time, and we will provide you with satisfactory solutions within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official Furologee store page on Amazon: Furologee Store.