Bellemave FST00062-AT-AK1
Contents
Bellemave Twin Over Twin Low Bunk Bed with Slide and Ladder User Manual
Model: FST00062-AT-AK1
Product Overview
The Bellemave Twin Over Twin Low Bunk Bed is designed for children, featuring a low-profile design, a built-in ladder, and a convertible slide. This bed is constructed from solid pine wood and commercial-grade MDF for durability and stability. It accommodates two standard twin-size mattresses (not included) and includes support slats, eliminating the need for a box spring.
Key features include:
- Convertible Ladder and Slide: Both the ladder and slide can be positioned on either the left or right side of the bed, offering flexibility in room arrangement.
- Low Bunk Bed Design: Ideal for rooms with limited vertical space, providing ample head clearance for the top bunk.
- Solid Construction: Crafted from durable pine wood and MDF for long-lasting use.
- Enhanced Safety Features: The upper bunk includes a full-length guardrail, and the bottom bunk features both a headboard and footboard. Solid pine wood legs contribute to overall stability.
- No Box Spring Required: Comes with sturdy support slats for direct mattress placement.

Image: The Bellemave Twin Over Twin Low Bunk Bed in white, featuring a slide on the left and a ladder on the right, set up in a child's room with toys.
Setup and Assembly
Assembly of the Bellemave Twin Over Twin Low Bunk Bed is required. It is recommended that two adults perform the assembly to ensure safety and efficiency. All necessary hardware and tools are typically included with the product. Please follow the step-by-step instructions provided in the separate assembly guide that accompanies your purchase.
Estimated Assembly Time: Approximately 4 hours.
Pre-Assembly Checklist:
- Verify all parts are present and undamaged by comparing them with the parts list in the assembly guide.
- Clear a spacious area for assembly, preferably near the bed's final location.
- Keep small parts and hardware organized to prevent loss.
Assembly Tips:
- Do not fully tighten screws until all components are loosely assembled, then tighten them securely.
- Pay close attention to the orientation of each piece as shown in the diagrams.
- Ensure the ladder and slide are securely attached and stable before use.

Image: The white bunk bed frame shown without mattresses, illustrating the structure before final setup.
Operating Instructions
Using the Bunk Bed:
- Top Bunk: Access the top bunk using the provided ladder. Always use the ladder for climbing up and down.
- Bottom Bunk: The bottom bunk is designed for easy access.
- Mattress Placement: Place standard twin-size mattresses directly onto the wooden slats. Ensure mattresses fit snugly within the frame.
Using the Slide and Ladder:
- Convertibility: The slide and ladder are designed to be convertible, allowing them to be installed on either the left or right side of the bed frame. Refer to the assembly guide for instructions on how to switch their positions.
- Slide Use: The slide is intended for recreational use. Ensure the area around the slide exit is clear of obstructions.
- Ladder Use: The ladder provides safe access to the top bunk. Ensure it is always securely attached.

Image: A close-up view of the bunk bed's slide and ladder, highlighting their design and attachment points.
Important Safety Information:
- Always supervise children while playing on the bunk bed, especially when using the slide.
- Do not exceed the maximum weight limit of 240 pounds for either bunk.
- Be cautious when using the convertible ladder and slide to prevent injury.
- Ensure all connections and fasteners are tight before each use.
- The top bunk is not suitable for children under 6 years of age.
- Use guardrails on both sides of the upper bunk.
- Prohibit more than one person on the upper bunk.
- Prohibit horseplay on or under the bed.
- Always use the ladder for entering and leaving the upper bunk.
Maintenance
Regular maintenance will help prolong the life and ensure the safety of your Bellemave bunk bed.
Cleaning:
- Wipe down the bed frame with a soft, damp cloth.
- Avoid using harsh chemicals, abrasive cleaners, or polishes, as these may damage the finish.
- For spills, clean immediately to prevent staining or damage to the wood.
Inspection:
- Periodically check all bolts, screws, and fasteners to ensure they are tight. Re-tighten if necessary.
- Inspect the wooden slats for any signs of cracking, warping, or damage. Replace any damaged slats immediately.
- Check the ladder and slide for stability and secure attachment points.
- Ensure guardrails are firmly in place and undamaged.
Troubleshooting
If you encounter any issues with your Bellemave bunk bed, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose bolts or fasteners. | Carefully re-tighten all bolts and screws. Do not overtighten. |
| Slide or ladder does not align correctly. | Incorrect assembly or minor manufacturing variation. | Review the assembly instructions for correct orientation. If a gap exists, ensure it does not pose a safety hazard. Contact customer support if alignment issues affect safety or functionality. |
| Missing or unlabeled parts during assembly. | Packaging error or parts not clearly marked. | Refer to the parts list in the assembly manual. If parts are genuinely missing, contact Bellemave customer support with your product model and purchase details. |
| Squeaking noises. | Loose connections or friction between wood components. | Re-tighten all hardware. Apply a small amount of paraffin wax or silicone spray to contact points if squeaking persists. |
If the issue persists or is not listed here, please contact Bellemave customer support for further assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Bellemave |
| Model Number | FST00062-AT-AK1 |
| Size | Twin Over Twin |
| Product Dimensions (L x W x H) | 80"L x 82.9"W x 50"H |
| Color | White+slide |
| Finish Type | Lacquered |
| Included Components | Bed Frame, Slats, Ladder, Slide |
| Compatible Mattress Size | Twin |
| Assembly Required | Yes |
| Item Weight | 58 pounds |
| Maximum Weight Capacity | 240 pounds (per bunk) |

Image: A detailed diagram showing the dimensions of the Bellemave Twin Over Twin Low Bunk Bed in inches.
Warranty and Support
Product Protection Plans:
While specific manufacturer warranty details are not provided, extended protection plans are available for purchase separately to cover your product beyond any standard limited warranty. These plans offer additional coverage for a specified duration.
- 2-Year Protection Plan: Available for purchase.
- 3-Year Protection Plan: Available for purchase.
- Complete Protect: A monthly subscription plan covering eligible purchases.
For details on coverage and terms, please refer to the specific protection plan documentation.
Customer Support:
For any questions, concerns, or assistance with your Bellemave Twin Over Twin Low Bunk Bed, please contact Bellemave customer service:
- Email: service@bellemave.com
- Online: Visit the official Bellemave Store on Amazon for more information and products: Bellemave Store
Please have your product model number (FST00062-AT-AK1) and purchase details ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.