1. Introduction
The Classic Accessories Stellex Center Console Cover is designed to provide robust protection for your boat's center console. Crafted from durable Stellex fabric, this cover safeguards your console from environmental elements such as dirt, sun, and weather, ensuring its longevity and appearance. This manual provides essential information for the proper setup, operation, maintenance, and care of your new console cover.
Image: The Classic Accessories Stellex Center Console Cover in blue.
2. Features
The Stellex Center Console Cover incorporates several design elements for optimal performance and durability:
- 100% Polyester Stellex Fabric: Engineered for exceptional durability and resistance to various weather conditions.
- Elastic Cord in Bottom Hem: Provides a quick, secure, and snug fit around the base of your console.
- Fabric Coating Technology: Resists dirt and stains while offering superior water-resistance and repellency.
- UV Protection: Designed to protect your console from harmful ultraviolet rays, preventing fading and material degradation.
Image: Detail showing the tough polyester Stellex fabric and the elastic hem with cordlock for a secure fit.
Image: Water beading on the Stellex fabric, demonstrating its water-resistant properties.
3. Setup
Proper measurement and fitting are crucial for the optimal performance of your console cover.
3.1 Measuring Your Console
Before placing the cover, ensure you have the correct size. Measure the length, width, and height of your boat's center console at its outer edges to determine the appropriate cover dimensions.
Image: Visual guide on how to measure your center console for proper cover sizing.
Image: Reference chart for small, medium, and large cover dimensions, indicating length, width, and height ranges.
3.2 Placing the Cover
- Ensure your console is clean and free of sharp objects that could snag the fabric.
- Carefully drape the cover over the top of your center console, aligning the front and back.
- Pull the cover down evenly on all sides until it fully encloses the console.
- Adjust the elastic cord in the bottom hem to achieve a snug fit around the base of the console. Secure the cordlock to prevent the cover from shifting or blowing off.
4. Operating
Once installed, the console cover requires minimal operation. Its primary function is passive protection.
4.1 Securing the Cover
The elastic cord with a cordlock in the bottom hem is the primary mechanism for securing the cover. After placing the cover, pull the cord firmly to cinch the hem tightly around the console's base. This prevents wind from lifting the cover and ensures maximum protection.
Image: The Stellex Center Console Cover securely fitted over a boat's console.
4.2 Removal
To remove the cover, loosen the elastic cord and carefully lift the cover off the console. Fold it neatly for storage to prevent creases and prolong its life.
5. Maintenance
Regular maintenance will extend the life and effectiveness of your console cover.
5.1 Cleaning
- For light dirt, simply brush off loose debris.
- For more stubborn dirt or stains, use a soft brush or sponge with mild soap and lukewarm water.
- Rinse thoroughly with clean water to remove all soap residue.
- Allow the cover to air dry completely before folding and storing. Do not machine wash or tumble dry.
5.2 Storage
When not in use, store the cover in a clean, dry place away from direct sunlight and extreme temperatures. Ensure it is completely dry before storage to prevent mildew growth.
6. Troubleshooting
6.1 Water Pooling on Top
If water collects on the top of the cover, it may indicate that the cover is not taut enough or that the console's shape allows for pooling. Ensure the elastic cord is pulled as tight as possible. If pooling persists, consider placing a support (e.g., a bucket or pole) under the cover to create a peak and allow water to run off.
6.2 Cover Blowing Off in Wind
Ensure the elastic cord is fully tightened and the cordlock is secure. For extremely windy conditions, consider adding additional tie-down straps or bungee cords around the base of the console and cover for extra security.
7. Specifications
| Attribute | Value |
|---|---|
| Brand | Classic Accessories |
| Model Number | 20-218-020501-00 |
| Size | 24"L x 36"W x 42"H |
| Color | Blue |
| Material | Fabric (100% Polyester) |
| Closure Type | Drawstring |
| Item Weight | 1.6 pounds |
| Product Dimensions | 36 x 42 x 24 inches |
| Water Resistance Level | Water Resistant |
| UV Protection | UV Protection |
| UPC | 052963013719 |
8. Warranty & Support
8.1 Warranty Information
This Classic Accessories Stellex Center Console Cover comes with a 2-year limited warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
8.2 Customer Support
For any questions, concerns, or assistance with your product, please contact Classic Accessories customer support. Refer to the product packaging or the official Classic Accessories website for the most current contact information.