Bennett Read Titan 30 Wet Dry Blow Vacuum Cleaner User Manual

Introduction

Thank you for choosing the Bennett Read Titan 30 Wet Dry Blow Vacuum Cleaner. This versatile appliance is designed for powerful cleaning across various surfaces, offering wet, dry, and blow functions. Its durable stainless steel design and advanced airflow make it suitable for a wide range of cleaning tasks. Please read this manual thoroughly before operation to ensure safe and efficient use.

Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Do not leave the appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces unless specifically designed for it (wet vacuuming).
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not use without appropriate filter (cloth for dry, foam for wet) in place.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• This appliance is equipped with a thermal cut-off switch to protect the motor from overheating. If the unit shuts off, unplug it and allow it to cool down for at least 30 minutes before restarting.

Package Contents

Please check the box for the following items:

• Bennett Read Titan 30 Wet Dry Blow Vacuum Cleaner Unit
• Flexible Hose
• Extension Wands
• Floor Nozzle (for wet and dry use)
• Crevice Tool
• Upholstery Tool
• Foam Filter (for wet vacuuming)
• Cloth Filter (for dry vacuuming)
• User Manual

Setup

Assembly

1. Unpack all components and ensure nothing is missing or damaged.
2. Attach the wheels to the base of the vacuum cleaner by pushing them firmly into their slots until they click into place.
3. Open the latches on the side of the drum and remove the motor head.
4. For Dry Vacuuming: Ensure the cloth filter is securely fitted over the filter cage.
5. For Wet Vacuuming: Remove the cloth filter and install the foam filter over the filter cage.
6. Place the motor head back onto the drum and secure the side latches.
7. Insert the flexible hose into the suction inlet on the front of the drum. Twist clockwise to secure.
8. Attach the desired accessory (extension wands, floor nozzle, crevice tool, or upholstery tool) to the end of the flexible hose.

Image: The Bennett Read Titan 30 vacuum cleaner fully assembled, showing the stainless steel drum, orange motor head, flexible hose, and floor nozzle. This illustrates the complete setup of the unit.

Operating Instructions

Dry Vacuuming

1. Ensure the cloth filter is correctly installed.
2. Plug the power cord into a suitable electrical outlet (240 Volts).
3. Press the ON/OFF switch to the 'ON' position.
4. Begin vacuuming dry debris from desired surfaces.
5. When finished, press the ON/OFF switch to 'OFF' and unplug the unit.

Wet Vacuuming

1. Important: Remove the cloth filter and install the foam filter for wet vacuuming. Failure to do so will damage the motor.
2. Plug the power cord into a suitable electrical outlet.
3. Press the ON/OFF switch to the 'ON' position.
4. Use the floor nozzle to pick up liquid spills. The vacuum will automatically stop suction when the liquid reaches its maximum capacity.
5. When finished, press the ON/OFF switch to 'OFF' and unplug the unit.
6. Drain the liquid from the drum using the easy-empty drainage plug at the bottom.

Image: A close-up of the vacuum cleaner's floor nozzle effectively suctioning a liquid spill from a tiled floor, demonstrating its wet vacuuming capability.

Blowing Function

1. Locate the blowing port on the motor head (opposite the suction inlet).
2. Insert the flexible hose into the blowing port. Twist clockwise to secure.
3. Plug the power cord into a suitable electrical outlet.
4. Press the ON/OFF switch to the 'ON' position.
5. Use the blowing function to clear debris from hard-to-reach areas or inflate items (with appropriate adapter, not included).
6. When finished, press the ON/OFF switch to 'OFF' and unplug the unit.

Maintenance

Emptying the Drum

• For Dry Debris: Unlatch the motor head and carefully lift it off. Dispose of the collected dry debris from the drum.
• For Liquids: Place the vacuum over a drain or suitable container. Unscrew the easy-empty drainage plug at the bottom of the drum to release the liquid. Re-secure the plug after draining.

Filter Cleaning and Replacement

• Cloth Filter (Dry): Regularly remove and shake off excess dust. For deeper cleaning, hand wash with mild soap and water. Ensure it is completely dry before re-installing. Replace if torn or heavily soiled.
• Foam Filter (Wet): After wet vacuuming, rinse the foam filter thoroughly with water. Squeeze out excess water and allow it to air dry completely before storage or next use. Replace if damaged.

Image: A graphic illustrating key features of the Bennett Read Titan 30, including its 30-litre capacity, stainless steel construction, durable quality, advanced airflow, and versatility for both dry and wet vacuuming. This highlights the product's robust design and capabilities.

General Cleaning

• Wipe the exterior of the vacuum cleaner with a damp cloth. Do not use harsh abrasives or solvents.
• Clean the hose and accessories as needed to prevent blockages.

Troubleshooting

Specifications

Warranty and Support

The Bennett Read Titan 30 Wet Dry Blow Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions, including warranty period and coverage details.

For technical support, spare parts, or warranty claims, please contact Bennett Read customer service. Contact details can typically be found on the manufacturer's official website or on your purchase receipt.

Website: www.bennettread.co.za