LELO Hugo 2 Remote Prostate Massager User Manual

Introduction

The LELO Hugo 2 Remote Prostate Massager is designed for targeted prostate stimulation. This manual provides essential information for the safe and effective use of your device.

Image: LELO Hugo 2 Remote Prostate Massager and its remote control.

Key Features

• Dual Powerful Motors: Features two motors at the base and tip for comprehensive stimulation.
• Remote Control: Wireless motion-sensitive remote for hands-free operation.
• 8 Vibration Settings: Offers a variety of rhythmic patterns.
• Body-Safe Silicone: Constructed from extra-soft, flexible, and body-safe silicone.
• Waterproof Design: IPX7 certified, suitable for use in baths or showers and easy cleaning.
• USB Rechargeable: Convenient charging with a long-lasting battery.

Image: Diagram illustrating the LELO Hugo 2 Remote's features, including dual motors, SenseMotion technology, remote control option, and a flared base for safety.

Package Contents

Upon unpacking your LELO Hugo 2 Remote, please ensure all items are present:

• Hugo 2 Remote-Controlled Prostate Massager
• Remote Control
• USB Charging Cable
• Satin Pouch for storage
• Instruction Manual
• Moisturizer Sachet (water-based lubricant, 5 ml / 0.17 fl. oz.)
• Warranty Registration Card

Image: The LELO Hugo 2 Remote package contents, including the device, remote, charging cable, satin pouch, manual, lubricant sachet, and warranty card.

Setup

Charging the Device

1. Before first use, charge your Hugo 2 Remote for 2 hours.
2. Locate the charging port on the device. It is typically covered by a silicone flap to ensure waterproofing.
3. Connect the provided USB charging cable to the device and a USB power source.
4. The LED lights on the device will blink to indicate the battery level during charging.
5. A full charge provides approximately 2 hours of use time. The device has a standby time of up to 90 days.

Image: Information graphic detailing charging time, use time, motion-sensitive remote range (up to 5m/16ft), extra-soft silicone material, and standby time (up to 90 days).

Operating Instructions

Basic Operation

1. Power On: Press the central button on the massager to turn it on. The LED lights will blink to indicate the battery level.
2. Adjust Intensity: If using the remote, use the '+' or '-' buttons to alter the vibration intensity.
3. Switch Settings: Press the '()' button on the remote to cycle through the 8 rhythmic vibration settings.
4. Power Off: Press and hold the central button on the massager to turn it off.

Usage Guide

1. Step 1: Preparation
   

   Image: An illustration depicting the first step of use: applying lubricant to the LELO Hugo 2 Remote and getting comfortable.

   Apply a generous amount of LELO Personal Moisturizer (water-based lubricant) to the Hugo 2 Remote and ensure you are in a comfortable position.

2. Step 2: Engagement
   

   Image: An illustration showing the second step of use: inserting the LELO Hugo 2 Remote and powering it on.

   Gently insert the Hugo 2 Remote, breathing deeply until it feels comfortable. Power on the device using the central button.

3. Step 3: Indulgence
   

   Image: An illustration depicting the third step of use: switching through settings to find the perfect intensity for a prolonged experience.

   Switch through the different settings using the remote until you find your preferred intensity. Enjoy the experience.

Maintenance

Cleaning

The LELO Hugo 2 Remote is IPX7 certified and fully waterproof, making it safe for cleaning. Always clean the device thoroughly before and after each use.

• Wash the device with warm water and a mild, antibacterial soap.
• Rinse thoroughly to remove all soap residue.
• Pat dry with a lint-free cloth or allow to air dry completely.
• Avoid using cleaning products containing alcohol, petroleum, or acetone, as these can damage the silicone.

Storage

Store your LELO Hugo 2 Remote in the provided satin pouch in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the device is fully dry before storing.

Troubleshooting

If you encounter any issues with your LELO Hugo 2 Remote, please refer to the following common solutions:

• Device not turning on: Ensure the device is fully charged. Connect it to the charger for at least 2 hours.
• Vibrations are weak or inconsistent: The battery may be low. Recharge the device.
• Remote control not responding: Ensure the remote is within the 5m/16ft wireless range of the device. Check if the remote's battery needs replacement (if applicable, though this model is rechargeable).
• Difficulty switching patterns: Press the '()' button firmly and briefly. If the device seems unresponsive, try turning it off and on again.
• Device turns off randomly: This could indicate a low battery. Ensure the device is fully charged. If the issue persists after charging, contact customer support.
• Device does not stay in place during use: Ensure adequate lubrication is used. Experiment with different positions to find what is most comfortable and secure.

If these steps do not resolve the issue, please contact LELO customer support for further assistance.

Specifications

Warranty and Support

Warranty Information

The LELO Hugo 2 Remote comes with a 1-year warranty covering manufacturing defects, alongside a 10-year quality guarantee. Please retain your Warranty Registration Card, which verifies product authenticity and is required for warranty claims.

Customer Support

For further assistance, product registration, or warranty claims, please visit the official LELO website or contact their customer support directly. Refer to the packaging or the LELO website for specific contact details.