Introduction
Welcome to the VIVOSUN FlexFeed Drip Irrigation Kit. This automatic irrigation system is designed to provide precise and efficient watering for your plants, especially when integrated with the VIVOSUN VGrow Smart Grow Box. This manual will guide you through the setup, operation, and maintenance of your new irrigation kit, ensuring optimal performance and plant health.
Safety Information
- Always ensure the water level inside the self-watering pot remains above the top surface of the pump to prevent dry running and potential damage to the pump.
- Use only with compatible equipment and power sources. If operating standalone, connect to a standard 5V 1A USB power adapter (not included).
- Regularly check all tubing connections for leaks to prevent water damage to your growing environment.
- Do not submerge the USB connector or power adapter in water.
- Keep the device and all components out of reach of children and pets.
Package Contents
The VIVOSUN FlexFeed Drip Irrigation Kit includes the following items:
- 1x Drip Irrigation Pump with integrated USB cable
- 4x Drip Emitters with pre-attached tubing
- 1x Water Splitter
- 1x Instruction Manual (this document)
Product Overview
The VIVOSUN FlexFeed Drip Irrigation Kit is an automated watering solution featuring a quiet pump and precise drip emitters. It is designed for seamless integration with the VIVOSUN VGrow Smart Grow Box, allowing for app-controlled watering schedules. It can also operate manually with a standard 5V 1A USB power adapter.
Setup Instructions
- Connect Tubing to Pump: Firmly press the tubing from the drip emitters into the outlet port of the pump until it clicks into place. Ensure a secure connection to prevent leaks.
A close-up view of hands connecting the black tubing to the blue-ringed outlet port on the VIVOSUN pump, illustrating the 'Press to Disconnect' mechanism. - Position the Pump: Place the pump in the designated corner (e.g., Corner B) of your VGrow Smart Grow Box's self-watering pot. Ensure the suction cups on the bottom of the pump adhere securely to the pot's surface.
This diagram illustrates the correct placement of the VIVOSUN FlexFeed pump within the VGrow Smart Grow Box's self-watering pot, indicating the connection points for the USB cable and drip emitters. - Add Water/Nutrient Solution: Fill the self-watering pot with water or your preferred nutrient solution until the pump is fully submerged. Refer to the safety information regarding minimum water levels.
A diagram highlighting the importance of maintaining the water level above the pump's top surface within the self-watering pot to ensure proper operation and prevent damage. - Insert Drip Emitters: Carefully insert the four drip emitters into the grow medium around your plant, ensuring they are positioned to deliver water directly to the root zone.
A hand is shown inserting one of the four drip emitters into the grow medium next to a plant, demonstrating the precise placement for targeted watering. - Connect USB Power: Take the USB cable from the pump and connect it into USB Port 2 on your VGrow unit. If using standalone, connect to a 5V 1A USB power adapter (not included).
A close-up of hands connecting the USB cable from the pump to a USB port, indicating the power connection for the irrigation system.
Operating Instructions
App Control (with VGrow Smart Grow Box)
For automated and precise control, connect your VIVOSUN FlexFeed Drip Irrigation Kit to the VIVOSUN app via your VGrow Smart Grow Box.
- Ensure your VGrow Smart Grow Box is connected to the VIVOSUN app.
- Open the VIVOSUN app and navigate to the VGrow device settings.
- Locate the "Drip Irrigation" section.
- You can choose between "Manual" control (turn ON/OFF directly) or "Cycle" mode to program specific watering times, frequencies, and flow rates based on your plant's growth stage (e.g., Seedling, Vegetative, Flowering).
Manual Control (Standalone)
If not connected to a VGrow Smart Grow Box, the pump can be operated manually by plugging it into a standard 5V 1A USB power adapter. The pump will run continuously when powered. Use an external timer (not included) for scheduled watering.
Maintenance
- Regular Cleaning: Periodically clean the pump and tubing to prevent mineral buildup or algae growth, which can affect performance. Always disconnect power before cleaning.
- Check for Clogs: Inspect drip emitters regularly for any clogs and clear them as needed to ensure consistent water flow to your plants.
- Water Level Monitoring: Always ensure the water reservoir has sufficient water to keep the pump submerged. Dry running can lead to pump damage and reduced lifespan.
- Tubing Inspection: Check tubing for kinks, leaks, or damage. Replace any compromised sections to maintain system integrity and prevent water loss.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not running | No power; USB cable loose; Pump clogged; Insufficient water level | Check USB connection and power source; Clean pump intake; Ensure water level is adequate and pump is fully submerged |
| No water flow from emitters | Tubing kinked or clogged; Emitters clogged; Pump not working correctly | Straighten tubing; Clean emitters thoroughly; Check pump operation as per above |
| Uneven watering | Emitters partially clogged; System not level; Inconsistent water pressure | Clean all emitters; Ensure grow box/pot is on a level surface; Check for kinks in tubing affecting pressure |
| Leaks | Loose connections; Damaged tubing; Improperly seated components | Re-secure all tubing connections by pressing firmly; Replace any damaged tubing sections |
| Pump making unusual noise | Dry running (not submerged); Debris in pump impeller; Air in the system | Add water to fully submerge pump; Disconnect power and clean pump impeller; Ensure all air is purged from tubing |
If issues persist after attempting these solutions, please refer to the VIVOSUN support website or contact their customer service department for further assistance.
Specifications
- Model: VSI-FFD2
- Power Input (Pump): 5W Max., DC 5V
- Water Flow Rate (Pump): 160 L/H (42 GPH) Max.
- Water Lift (Pump): 5 ft
- Drip Rate: 40ml/min Total Drip Emitters
- Number of Drip Emitters: 4
- Product Dimensions (Pump): 1.57 x 2.17 x 1.38 inches
- Material: Plastic, Metal
Warranty and Support
For detailed warranty information, product registration, or technical support, please visit the official VIVOSUN website. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims. Contact information for customer service can typically be found on the VIVOSUN website.
