Wisdomlit QB-809

Wisdomlit Fog Bubble Machine User Manual

Model: QB-809

Brand: Wisdomlit

1. Introduction

The Wisdomlit Fog Bubble Machine is designed to create a unique atmosphere by producing both fog and bubbles, or fog-filled bubbles. This versatile machine is ideal for various events and celebrations, including parties, holidays, weddings, and stage performances. With its 250W power, it can generate over 8000 fog bubbles per minute, enhancing any indoor or outdoor setting.

Wisdomlit Fog Bubble Machine creating fog bubbles in a Halloween setting with pumpkins.

Image: The Wisdomlit Fog Bubble Machine in action, producing numerous fog-filled bubbles, set against a backdrop of Halloween decorations.

2. Safety Information

For your safety and to ensure proper operation, please read the dedicated Safety Information PDF document thoroughly before using this product. This document contains critical warnings and guidelines.

Access the Safety Information PDF: Safety Information (PDF)

3. Package Contents

Note: Fog liquid and bubble solution are not included and must be purchased separately.

4. Setup and Operation

4.1 Liquid Tank Capacities

Diagram showing liquid tank capacities and machine dimensions.

Image: Visual representation of the machine's liquid tank capacities and overall dimensions, highlighting the enclosed reservoir design.

4.2 Initial Setup Steps

Step-by-step guide for setting up the Fog Bubble Machine.

Image: A visual guide detailing the five steps for preparing and operating the machine, including filling tanks and selecting modes.

  1. Fill the bubble liquid tank with appropriate bubble solution.
  2. Fill the fog liquid tank with fog solution.
  3. Plug the power cord into a wall outlet.
  4. Select the desired function mode using the switch: Bubble or Smoky Bubble.
  5. For Smoky Bubble mode, allow approximately 3 to 7 minutes for the machine to warm up. The indicator light will change to signal readiness.

4.3 Indicator Light Status

Comparison of colorful bubbles and fog bubbles produced by the machine.

Image: Illustrates the two primary output modes: standard colorful bubbles and unique fog-filled bubbles, showcasing the machine's versatility.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Fog Bubble Machine.

6. Troubleshooting

If you encounter issues with your Fog Bubble Machine, refer to the following common solutions:

ProblemPossible CauseSolution
No fog or bubbles producedLiquid tanks are empty or low. Machine not warmed up (for fog). Power issue.Refill tanks. Allow 3-7 minutes warm-up time for smoky bubble mode. Ensure power cord is securely plugged in. Check indicator light status.
Red light flashingNo fog liquid detected.Refill the fog liquid tank.
Machine leakingTank caps not securely tightened. Machine damaged.Ensure all tank caps are tightly closed. Inspect machine for visible damage. If damage is present, discontinue use and contact support.
Weak bubble/fog outputLow liquid levels. Incorrect liquid type. Clogged nozzle.Ensure tanks are adequately filled. Use recommended bubble and fog solutions. Perform regular cleaning to prevent clogs.

7. Specifications

FeatureDetail
Model NumberQB-809
Item Weight5.68 pounds
Product Dimensions10.7 x 9.76 x 6.25 inches
Power250W
Bubble Output8000+ Fog Bubbles Per Minute
Date First AvailableJanuary 3, 2024

8. Warranty and Support

For warranty information or technical support, please contact Wisdomlit customer service through the retailer where the product was purchased or refer to the official Wisdomlit website for contact details.

Access the User Manual (PDF): User Manual (PDF)