Xigmatek EN41914
Contents
Xigmatek Aqua Ultra AIR Arctic PC Case User Manual
Model: EN41914
1. Introduction
Welcome to the user manual for the Xigmatek Aqua Ultra AIR Arctic PC Case. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new PC chassis. The Aqua Ultra AIR Arctic is a high-performance case designed to showcase your components with its elegant tempered glass front and side panels. It comes equipped with seven 120mm ARGB fans, offering excellent cooling and vibrant aesthetics, and supports graphics cards up to 460mm in length, making it ideal for advanced gaming setups.

This image displays the Xigmatek Aqua Ultra AIR Arctic PC case in white. The front and side panels are made of tempered glass, showcasing the interior. Seven 120mm ARGB fans are visible, three on the front, three on the top, and one at the rear, all emitting a vibrant rainbow illumination. The case features a clean, modern design suitable for high-performance gaming builds.
2. Key Features
- Elegant Design: Features tempered glass front and side panels for a clear view of internal components.
- Optimized Airflow: Pre-installed with seven 120mm ARGB fans (3 front, 3 top, 1 rear) for efficient cooling.
- Spacious Interior: Supports graphics cards up to 460mm in length.
- Motherboard Compatibility: Compatible with ATX motherboards.
- Connectivity: Equipped with 5 total USB ports for peripheral connections.
- Liquid Cooling Support: Designed to accommodate liquid cooling solutions.
- Durable Construction: Made from aluminum for robust build quality.
3. Package Contents
Please verify that all items are present in your package:
- Xigmatek Aqua Ultra AIR Arctic PC Case
- Accessory Kit (screws, standoffs, cable ties)
- User Manual (this document)
4. Setup Guide
Follow these steps to set up your Xigmatek Aqua Ultra AIR Arctic PC case and install your components:
- Unpacking: Carefully remove the PC case from its packaging. Retain the packaging for future transport or storage.
- Accessing Interior: Remove the tempered glass side panel(s) by unscrewing the thumb screws or releasing the latch mechanism.
- Motherboard Installation: Install the necessary motherboard standoffs (if not pre-installed) according to your motherboard's form factor. Carefully place your ATX motherboard into the case and secure it with screws.
- Power Supply Unit (PSU) Installation: Install your PSU into the designated rear mounting area. Secure it with screws from the rear of the case.
- Storage Drive Installation: Install your 2.5-inch SSDs or 3.5-inch HDDs into the available drive bays. Refer to the case's internal layout for specific mounting points.
- Graphics Card (GPU) Installation: Remove the necessary PCIe slot covers. Insert your graphics card into the PCIe slot on your motherboard and secure it with the retention clip and screw.
- Cable Management: Route all power and data cables through the designated cutouts and channels behind the motherboard tray to ensure clean aesthetics and optimal airflow. Connect all necessary cables to your components.
- Fan and ARGB Connections: The case comes with 7 pre-installed ARGB fans. Connect their power cables to your PSU and their ARGB cables to your motherboard's ARGB header or a dedicated ARGB controller (if included or purchased separately).
- Front Panel Connections: Connect the front panel cables (USB, audio, power/reset switches, LED indicators) to the corresponding headers on your motherboard.
- Final Assembly: Once all components are installed and cables are managed, reattach the tempered glass side panel(s).
5. Operating Your PC Case
The Xigmatek Aqua Ultra AIR Arctic PC case functions as an enclosure for your computer components. Its operation is primarily tied to the components installed within it. Ensure all components are correctly installed and connected before powering on your system.
- Power On: Press the power button on the front I/O panel to start your computer.
- ARGB Lighting Control: The pre-installed ARGB fans' lighting can typically be controlled via your motherboard's ARGB software (if connected to an ARGB header) or a dedicated ARGB controller. Refer to your motherboard or controller manual for specific instructions.
- Airflow: The case is designed for optimal airflow. Ensure no obstructions block the fan intakes (front and top) or exhaust (rear).
6. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your PC case and its components.
- Dust Cleaning: Periodically clean dust filters (if present) and fan blades. Use compressed air to remove dust from hard-to-reach areas. Ensure the system is powered off and unplugged before cleaning.
- Tempered Glass Care: Clean the tempered glass panels with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass.
- Cable Management Check: Occasionally check cable routing to ensure no cables are obstructing airflow or fan operation.
7. Troubleshooting
This section addresses common issues you might encounter.
- No Power:
- Ensure the PSU is properly installed and connected to the motherboard and components.
- Check that the power button cable from the front panel is correctly connected to the motherboard's front panel header.
- Verify the PSU switch is in the 'ON' position and the power cable is securely plugged into a working outlet.
- Fans Not Spinning/ARGB Not Lighting Up:
- Check that all fan power cables are securely connected to the motherboard or fan controller.
- Ensure ARGB cables are correctly connected to the motherboard's ARGB header or a dedicated controller.
- Verify that ARGB software or controller settings are configured correctly.
- Component Fit Issues:
- If a component (e.g., large GPU, CPU cooler) does not fit, double-check the case's maximum supported dimensions against your component's specifications.
- Ensure all cables are routed efficiently to avoid obstruction.
For more complex issues, consult the manuals for your individual PC components or seek professional assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Xigmatek |
| Model Name | Aqua Ultra AIR Arctic |
| Model Number | EN41914 |
| Color | White |
| Case Type | Mid-Tower (also described as Full-Tower) |
| Material | Aluminum |
| Special Features | Tempered Glass, 7 ARGB Fans |
| Total USB Ports | 5 |
| Compatible Devices | Gaming Equipment |
| Motherboard Compatibility | ATX |
| Recommended Uses | Gaming |
| PSU Mounting Type | Rear Mount |
| Cooling Method | Supports Liquid Cooling |
| Fan Size | 120 Millimeters |
9. Warranty and Support
For information regarding warranty coverage, terms, and conditions for your Xigmatek Aqua Ultra AIR Arctic PC Case, please refer to the warranty card included with your product or visit the official Xigmatek website. Warranty details can vary by region and retailer.
For technical support, spare parts availability, or software updates, please contact Xigmatek customer service or the retailer from whom you purchased the product. Information regarding spare parts and software updates was not available at the time of this manual's creation.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.