Diivoo Water Sprinkler Timer WT-02 User Manual

1. Introduction

Thank you for choosing the Diivoo Water Sprinkler Timer WT-02. This programmable irrigation hose timer is designed to simplify your garden, yard, and lawn watering needs with its intelligent features and durable construction. Please read this manual carefully before use to ensure proper operation and longevity of your device.

1.1 Package Contents

Diivoo Water Sprinkler Timer and its packaging

The package includes the Diivoo Water Sprinkler Timer WT-02, thread seal tape, threaded connectors, a 1/2" inlet adapter, and this user manual. Ensure all components are present before proceeding with installation.

1.2 Product Appearance and Components

Detailed view of the Diivoo Water Sprinkler Timer with labels for each component

Hose Faucet Connection: Top connection point for water inlet.
Setting Button: Used to enter and navigate settings.
LCD Screen: Displays time, program status, and settings.
3 Separate Watering Programs Button (P1, P2, P3): Selects the program to set or view.
Increase (+) Button: Increases values or navigates options.
Decrease (-) Button: Decreases values or navigates options.
Manual Watering Button (Faucet Icon): Activates manual watering.
Confirm Button (OK): Confirms selections.
Outlet Fitting NH3/4": Bottom connection point for water outlet to hose.

The timer features a clear LCD screen and intuitive buttons for easy programming. It includes a hose faucet connection at the top and an outlet fitting at the bottom for connecting to your watering system.

2. Setup

2.1 Battery Installation

Image showing the waterproof battery compartment of the Diivoo water timer

The Diivoo Water Sprinkler Timer requires 2 x AA (1.5V) Alkaline batteries (not included). Open the battery compartment cover on the back of the device. Insert the batteries, ensuring correct polarity (+/-). Close the cover securely to maintain the IP55 waterproof rating.

2.2 Connecting to Faucet

Diagram showing how to connect the water timer to 1/2 inch and 3/4 inch hose stopcocks using adapters

Attach the timer to your outdoor faucet. The timer features 360-degree rotating fittings for easy installation. Use the provided 1/2" adapter and O-ring if your faucet is a 1/2" hose stopcock. For 3/4" hose stopcocks, no adapter is needed. Ensure a tight connection to prevent leaks. A built-in filter is included to prevent debris from entering the timer.

2.3 Setting Your Local Time

To set the current local time on your timer: Press the "SET" button. Use the "+" and "-" buttons to adjust the hour and minute. Press "OK" to confirm each setting. Use the "+" and "-" buttons to select the current day of the week. Press "OK" to confirm. This video demonstrates the process of setting the local time and date on the Diivoo Water Sprinkler Timer.

3. Operating Instructions

3.1 Timed Irrigation Mode (Programming)

Three panels showing different timed irrigation scenarios and a digital interface for setting programs

The timer supports 3 separate watering programs (P1, P2, P3). To set a program, for example, P3 for 1.5 hours at 8:00 on Mondays and Tuesdays:

Press the "PROGRAM" button to select P3.
Use the "+" and "-" buttons to set the start time to 8:00. Press "OK".
Set the watering duration ("How Long") to 1 hour and 30 minutes. Press "OK".
Select Monday and Tuesday as watering days. Press "OK".
Finally, press the "SET" button to switch to "Auto" mode to activate the program.

The same steps apply to setting programs P1 and P2. This feature allows for customized watering schedules to suit different plant needs.

3.2 Manual Watering

A person manually watering plants with a hose, with an inset showing the timer's manual watering button

To initiate manual watering without interrupting preset programs: Firstly, press the "SET" button to switch the timer to "AUTO" state. Then, hold and press the "Manual Watering" (faucet icon) button. Use the "+" and "-" buttons to set the desired watering duration. Press "OK" to confirm. To switch off manual watering, press and hold the "Manual Watering" button again.

3.3 Rain Delay Function

The water timer connected to a faucet with rain falling, indicating the rain delay feature

The rain delay function helps avoid overwatering and conserves water. To activate: Firstly, press the "SET" button to switch the timer to "AUTO" state. Then, hold and press the "+" button. Use the "+" and "-" buttons to select the desired delay duration from 1 to 7 days. Press "OK" to confirm. To switch off the rain delay, you need to turn off the rain delay function manually to make other settings.

3.4 Child Lock

A father and child watering plants, with an inset showing the child lock icon on the timer

The child lock feature prevents accidental triggering by children or pets. To activate: Hold and press the "-" button. The lock icon will appear on the screen. To deactivate: Hold and press the "-" button again. The lock icon will disappear.

4. Maintenance

4.1 Cleaning the Filter

Close-up of the water timer's inlet with a built-in filter and a 360-degree rotating fitting

The timer has a built-in filter at the inlet to prevent debris from entering the system. Periodically check and clean this filter to ensure optimal water flow and prevent blockages. Unscrew the top connection, remove the filter, rinse it under running water, and reinsert it.

4.2 Battery Replacement

When the battery indicator on the LCD screen shows low power, replace the batteries promptly. Use 2 x AA (1.5V) Alkaline batteries. Ensure the battery compartment is sealed properly after replacement to maintain water resistance.

4.3 Winterization

Before the first frost, disconnect the water timer from the faucet and hose. Drain any remaining water from the unit. Store the timer indoors in a dry, frost-free location to prevent damage from freezing temperatures.

5. Troubleshooting

Problem	Possible Cause	Solution
Timer not watering / Program not working	Incorrect program settings; Low battery; Valve stuck closed; Timer not in AUTO mode.	Review program settings (start time, duration, days). Replace batteries. Check for debris in valve/filter. Ensure timer is set to AUTO mode.
Watering continuously / Valve stuck open	Debris in valve; Malfunction.	Disconnect from water source. Clean the filter and flush the valve. If issue persists, contact customer support.
LCD screen turning on and off / Unreadable display	Low battery; Water ingress.	Replace batteries. Ensure battery compartment is sealed. If water ingress is suspected, dry the unit thoroughly.
Water leakage from connections	Loose connection; Worn O-ring/seal tape.	Tighten connections. Apply more thread seal tape. Check and replace O-rings if damaged.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Diivoo customer support for assistance.

6. Specifications

Detailed image of the water timer showing its dimensions and material information

Product Dimensions: 4.84 x 4.37 x 1.94 inches
Item Weight: 13.1 ounces
Manufacturer: Diivoo
Item model number: WT-02
Batteries: 2 x AA (1.5V) Alkaline batteries required (not included)
Water Pressure: 0.5 - 8 bar (0.5-8.1 kg)
Material: ABS material, 30% reinforced nylon fiber material
Waterproof Rating: IP55
Number of settings: 3 individual watering programs
First Available: January 2, 2024

7. Warranty and Support

Diivoo US/CA-Based Customer Care information

Diivoo is committed to providing excellent customer support. Our team of experts is available 5 days a week via email or phone for US/CA-based customer care. For any product inquiries, technical assistance, or warranty claims, please do not hesitate to reach out to us. Refer to the product packaging or the official Diivoo website for the most current contact information.

	Diivoo WT-04 Dual Water Timer User Manual: Setup, Operation, and Troubleshooting Comprehensive user manual for the Diivoo WT-04 Dual Water Timer. Learn how to set up, program, operate, and maintain your automatic garden watering system, including features like rain delay and child lock.
	Diivoo WT-05W Smart Dual Water Timer with WiFi Hub User Manual User manual for the Diivoo WT-05W Smart Dual Water Timer with WiFi Hub. This guide covers setup, app usage, features like manual watering and rain delay, integration with Alexa and Google Assistant, and troubleshooting.
	Diivoo WT-04 Dual Water Timer User Manual User manual for the Diivoo WT-04 Dual Water Timer, providing instructions on setting up automatic watering programs, manual operation, rain delay, child lock, and troubleshooting.
	Diivoo Dual Water Timer User Manual This user manual provides detailed instructions for the Diivoo Dual Water Timer, covering product appearance, specifications, function key descriptions, important tips, operation modes, and FAQs. Learn how to set up and use your Diivoo water timer for efficient garden irrigation.
	Diivoo WT-05 Bluetooth Dual Water Timer User Manual User manual for the Diivoo WT-05 Bluetooth Dual Water Timer, detailing setup, features, scheduling, and troubleshooting for garden irrigation.
	Diivoo WT-02 Automatic Water Timer User Manual Comprehensive user manual for the Diivoo WT-02 Automatic Water Timer, detailing setup, programming, features like Rain Delay and Child Lock, specifications, and troubleshooting.

Diivoo WT-02

Diivoo Water Sprinkler Timer (Model: WT-02)