Brook P5 Plus Fighting Board Instruction Manual

1. Introduction

The Brook P5 Plus Fighting Board is a high-performance printed circuit board (PCB) designed for custom arcade stick and leverless controller builds. It offers ultra-low latency and broad compatibility across multiple gaming platforms, enhancing the precision and responsiveness of fighting game inputs. This manual provides essential information for installation, operation, and maintenance of your P5 Plus Fighting Board.

2. Package Contents

Verify that all items listed below are included in your package:

• Brook P5 Plus Fighting Board - Pre-Installed Header Version (1 unit)
• Random Sticker (1 unit)
• Brook Inside Sticker (1 unit)

Note: Additional wiring harnesses, buttons, joysticks, and controller enclosures are sold separately and are required for a complete arcade stick build.

3. Key Features

• Ultra-Low Latency: Achieves a response time of 0.4 ms for precise input registration.
• Broad Console Compatibility: Supports PS5 (fighting games only), PS4, PS3, Nintendo Switch, and PC (X-Input).
• Pre-Installed Headers: Simplifies installation by eliminating the need for soldering.
• Multiple SOCD Modes: Offers four different Simultaneous Opposing Cardinal Directions (SOCD) modes with auto-save functionality, compliant with international event standards.
• LS/RS/DP Modes: Easily switch between Left Stick, Right Stick, and D-Pad input modes.
• Turbo Function: Provides programmable turbo functionality for rapid button presses.
• Automatic Console Detection: Automatically detects the connected gaming console.
• Firmware Upgradable: Ensures ongoing compatibility and access to new features.
• Player LEDs: Features four different player LEDs for status indication.

4. Compatibility

The Brook P5 Plus Fighting Board is compatible with the following gaming platforms:

• PlayStation 5 (PS5): Supports fighting games only. Refer to the official Brook website for a list of supported PS5 fighting games.
• PlayStation 4 (PS4)
• PlayStation 3 (PS3)
• Nintendo Switch (NS)
• PC (X-Input)

Image: The Brook P5 Plus Fighting Board highlighting its compatibility across multiple gaming platforms including PS5, PS4, PS3, Nintendo Switch, and PC.

5. Setup and Installation

The P5 Plus Fighting Board features pre-installed headers, simplifying the connection process for custom arcade controllers. While soldering is not required for basic connections, a compatible wiring harness kit is highly recommended for ease of installation.

5.1 Physical Installation

1. Prepare Your Enclosure: Ensure your arcade stick or leverless controller enclosure has adequate space and mounting points for the P5 Plus Fighting Board.
2. Mount the Board: Securely mount the P5 Plus Fighting Board within your enclosure using appropriate standoffs and screws.
3. Connect Wiring Harness (Recommended): If using a wiring harness, connect the harness to the corresponding headers on the P5 Plus Fighting Board. These headers are clearly labeled for ground (GND), directional inputs (UP, DOWN, LEFT, RIGHT), and action buttons (e.g., SQUARE, CROSS, CIRCLE, TRIANGLE, L1, R1, L2, R2, OPTIONS, SHARE, PS).
4. Connect Buttons and Joystick: Connect your arcade buttons and joystick to the wiring harness or directly to the labeled headers on the fighting board. Ensure correct polarity for all connections.
5. USB Connection: Connect a USB cable from the P5 Plus Fighting Board's USB port to your gaming console or PC.

Image: Illustrates the simple installation process, showing hands connecting a wiring harness to the P5 Plus Fighting Board, emphasizing the pre-installed headers.

Image: A detailed view of the Brook P5 Plus Fighting Board, showcasing its various connection points and pre-installed headers for easy wiring.

5.2 Initial Connection

Once physically installed, connect the fighting board to your desired console or PC. The board features auto-detection for compatible systems. Player LEDs will illuminate to indicate successful connection and player assignment.

6. Operating Instructions

6.1 SOCD Modes

The P5 Plus Fighting Board supports four Simultaneous Opposing Cardinal Directions (SOCD) modes. These modes determine how conflicting directional inputs (e.g., pressing Left and Right simultaneously) are processed. The board saves your last selected SOCD mode automatically.

Specific button combinations are used to cycle through these modes. Refer to the official Brook website or product documentation for the exact hotkey combinations to switch between SOCD modes.

Image: A table detailing the four available SOCD modes (UP Priority, CAPCOM/Neutral, Last Priority, BYPASS) and how they resolve conflicting directional inputs.

6.2 LS/RS/DP Modes

You can switch the directional input functionality between Left Stick (LS), Right Stick (RS), and D-Pad (DP) modes. This is useful for games that require specific input types. The method for switching these modes typically involves a button combination or a dedicated switch if wired to the board.

6.3 Turbo Function

The turbo function allows for rapid, automatic pressing of a selected button. To activate and configure the turbo function, consult the detailed instructions on the official Brook website or the specific documentation provided with your board.

7. Firmware Updates

The Brook P5 Plus Fighting Board is firmware-upgradable. Regular firmware updates ensure optimal performance, compatibility with new games and consoles, and access to the latest features. It is recommended to periodically check the official Brook website for the latest firmware versions and update instructions.

Procedure:

1. Visit the official Brook Gaming website.
2. Navigate to the support or downloads section for the P5 Plus Fighting Board.
3. Download the latest firmware update tool and firmware file to your PC.
4. Follow the specific instructions provided with the firmware update tool to connect your P5 Plus Fighting Board to your PC and perform the update.

Note: Ensure your PC remains powered and the USB connection is stable during the entire firmware update process to prevent damage to the board.

8. Technical Specifications

9. Troubleshooting

• No Detection by Console/PC:
  • Ensure the USB cable is securely connected to both the fighting board and the console/PC.
  • Try a different USB port or cable.
  • Verify that the fighting board has the latest firmware installed. Refer to Section 7 for firmware update instructions.
  • For PS5, confirm that the game being played is a supported fighting game.
• Incorrect Button/Directional Inputs:
  • Check all wiring connections to ensure they are correctly mapped to the corresponding headers on the board.
  • Confirm the selected LS/RS/DP mode is appropriate for your game.
  • If experiencing issues with simultaneous directional inputs, review the SOCD mode settings.
• Input Lag:
  • Ensure the fighting board has the latest firmware.
  • Avoid using USB hubs if possible, or use a high-quality powered hub.
  • Test on different consoles/PCs to isolate the issue.

10. Maintenance

• Cleaning: Use a dry, soft cloth to gently clean the surface of the fighting board. Avoid using liquid cleaners or solvents.
• Storage: When not in use, store the fighting board in a dry, dust-free environment.
• Firmware: Regularly check for and install firmware updates to maintain optimal performance and compatibility.

11. Warranty and Support

For warranty information, technical support, and further assistance, please visit the official Brook Gaming website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Official Brook Website: www.brookaccessory.com