Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your new VASAGLE Bakers Rack with Charging Station, Model UKKS016K02. Please read all instructions carefully before assembly and use to ensure safe and correct operation of the product. Keep this manual for future reference.
Safety Information
- Assembly: Assemble the unit on a soft, clean surface to prevent scratches. Ensure all parts are present and undamaged before beginning assembly. Do not overtighten screws during initial assembly; tighten fully once the unit is stable.
- Stability: For safety, always attach the anti-tip kit to a wall as instructed. This prevents accidental tipping, especially in households with children or pets.
- Weight Capacity: Do not exceed the maximum weight limits for each shelf as specified in the 'Specifications' section. Overloading can cause structural damage or collapse.
- Electrical Safety: The integrated charging station is designed for indoor use only. Do not expose it to moisture. Ensure the total power consumption of connected devices does not exceed 1875 watts. The power strip includes overload protection and a safety switch.
- Placement: Place the rack on a level surface. Adjust the leveling feet to ensure stability and prevent wobbling.
Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Metal Frame Components
- Particleboard Shelves (4 total)
- Integrated Power Strip with 4 AC Outlets
- Grid Panel
- S-Hooks (12 pieces)
- Anti-Tip Kit
- Assembly Hardware (screws, Allen wrench, etc.)
- Instruction Manual

Image: Components of the anti-tip kit, including a fabric strap and mounting hardware.

Image: A set of S-hooks provided for hanging kitchen utensils or other items.
Assembly Instructions
Follow these steps carefully to assemble your bakers rack. It is recommended to have two people for assembly.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface. Refer to the parts list to identify each piece.
- Assemble the Frame: Attach the metal frame components according to the diagrams in the included instruction booklet. Ensure all screws are finger-tightened initially.
- Install Shelves: Secure the particleboard shelves to the frame. Pay attention to the orientation of the shelves, especially the main worktop and the adjustable middle shelf.
- Attach Grid Panel and Hooks: Mount the grid panel to the upper frame. The S-hooks can then be placed on the grid panel or the top bar as desired.
- Install Power Strip: The power strip can be installed on either the left or right side of the main worktop, based on your preference and outlet accessibility. Secure it firmly with the provided screws.
- Final Tightening and Stability Check: Once all components are in place, fully tighten all screws. Gently shake the unit to ensure it is stable. Adjust the leveling feet at the bottom of the rack to compensate for uneven floors.
- Secure with Anti-Tip Kit: Attach the anti-tip kit to the top rear of the rack and secure it to a sturdy wall stud using appropriate hardware. This step is crucial for safety.

Image: A diagram illustrating the overall dimensions of the bakers rack (31.5"W x 15.7"D x 67.5"H) and the maximum weight capacity for each shelf (100 lbs for main shelves, 19.8 lbs for top shelf, 11 lbs for grid panel).

Image: A visual guide demonstrating that the power strip can be installed on either the left or right side of the rack's main worktop.

Image: A close-up of an adjustable leveling foot, which can be rotated to stabilize the rack on uneven surfaces.
Operating Instructions
Your VASAGLE Bakers Rack is designed for versatile storage and functionality in your kitchen or dining area.
- Storage: Utilize the four shelves for various kitchen appliances, cookware, dishes, or pantry items. The top shelf is ideal for spices and smaller jars.
- Grid Panel and Hooks: The grid panel and 12 S-hooks provide convenient hanging storage for mugs, towels, spatulas, or other frequently used utensils.
- Worktop: The spacious main worktop (31.5"W) is suitable for food preparation or housing larger appliances like coffee makers or toasters.

Image: The VASAGLE Bakers Rack fully assembled and organized with a coffee machine, toaster, microwave, air fryer, and various pots and jars, demonstrating its storage capabilities.

Image: The bakers rack positioned in a kitchen, showcasing its design and how it integrates into a home environment, holding kitchen appliances and decor.
Adjustable Features
- Adjustable Middle Shelf: The lower middle shelf offers 3 adjustable height options, allowing you to customize the storage space to accommodate items of varying sizes, such as different microwave models or taller containers.
- Adjustable Power Strip Position: The power strip can be installed on either the left or right side of the main worktop during assembly, providing flexibility based on your kitchen layout and power outlet access.
- Adjustable Leveling Feet: The feet at the base of the rack can be adjusted to ensure the unit remains stable and level on uneven floor surfaces.

Image: A diagram illustrating the adjustable middle shelf, highlighting its ability to be moved up or down by 4 inches (10 cm) to fit different appliance heights.
Charging Station Usage
The integrated charging station provides convenient power access for your kitchen appliances.
- Outlets: Features 4 standard AC outlets (120V/15A).
- Power Capacity: Supports a maximum power output of 1875 watts. Ensure the total wattage of all connected devices does not exceed this limit.
- Safety Features: Equipped with overload protection and current leakage protection for enhanced safety.
- On/Off Switch: A dedicated on/off switch allows you to easily control power to all connected devices.
- Extension Cord: Includes a 6.5 ft (2 m) extension cord for flexible placement.

Image: A close-up view of the built-in power strip, showing the four AC outlets, the red reset/on-off switch, and the power cord extending from the unit.
Maintenance and Care
To maintain the appearance and longevity of your bakers rack, follow these simple care instructions:
- Cleaning: Wipe surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth followed by a dry cloth can be used. Avoid abrasive cleaners or harsh chemicals.
- Spills: Promptly wipe up any spills to prevent damage to the particleboard surfaces.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.

Image: A hand wiping a surface with a dry cloth, illustrating the recommended cleaning method for the rack's surfaces.
Troubleshooting
If you encounter any issues with your bakers rack, refer to the following common solutions:
- Unit is Wobbly:
- Ensure all screws are fully tightened.
- Adjust the leveling feet at the bottom of the rack to stabilize it on uneven floors.
- Verify that the anti-tip kit is securely fastened to the wall.
- Power Strip Not Working:
- Check if the power strip's on/off switch is in the 'ON' position.
- Ensure the power cord is securely plugged into a functional wall outlet.
- If the overload protection has tripped, press the reset button on the power strip. Reduce the number of connected devices or their total wattage.
- Missing or Damaged Parts: If you discover any missing or damaged parts during assembly, do not proceed with assembly. Contact customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Bakers Rack with Charging Station |
| Model Number | UKKS016K02 |
| Dimensions (Overall) | 15.7"D x 31.5"W x 67.5"H (40 cm D x 80 cm W x 171.5 cm H) |
| Material | Particleboard, Steel |
| Number of Shelves | 4 |
| Main Shelf Weight Capacity | 100 lbs (45 kg) per shelf |
| Top Shelf Weight Capacity | 19.8 lbs (9 kg) |
| Grid Panel Weight Capacity | 11 lbs (5 kg) |
| Charging Station Outlets | 4 AC Outlets (120V/15A) |
| Charging Station Max. Power | 1875 Watts |
| Power Cord Length | 6.5 ft (2 m) |
| Special Features | Adjustable Middle Shelf, Adjustable Power Strip Position, Overload Protection, Current Leakage Protection, On/Off Switch, Anti-Tip Kit, Adjustable Feet |
| Assembly Required | Yes |
| Product Care | Wipe with Dry Cloth |

Image: A comparison showing the thickness of the steel tubes used in this product (1.2" / 3 cm) versus a thinner alternative (0.8" / 2 cm), indicating robust construction for stability and durability.
Warranty and Support
For warranty information, product support, or to report missing/damaged parts, please contact VASAGLE customer service through the retailer where the product was purchased. Please have your model number (UKKS016K02) and purchase details ready when contacting support.