1. Introduction
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your Uthfy 24 Inch Heavy Duty Industrial Drum Fan. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1: Uthfy 24 Inch Heavy Duty Industrial Drum Fan with key dimensions (27.9"D x 16.51"W x 26.92"H).
2. Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:
- Always unplug the fan from the power outlet before cleaning, servicing, or moving.
- Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
- Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas where it will not be tripped over.
- Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
- Do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This fan is intended for indoor and outdoor use in dry, non-explosive environments. Do not use in wet locations such as bathrooms or laundries.
- Always place the fan on a stable, flat surface to prevent it from tipping over.
- Keep children and pets away from the fan during operation.
- Do not use this fan with any solid-state speed control device.
3. Package Contents
Verify that all components are present in the package:
- Drum Fan Unit
- Fan Cradle Base (2 pieces with feet)
- Support Tubes (4 pieces)
- Wheel Assembly (1 piece)
- Wheels (2 pieces)
- Spacer Tube (1 piece)
- 5/8" Screws (2 for Spacer Tube)
- 3/8" Screws (4 for Support Tubes)
- Washers and Sockets
- User Manual
4. Assembly Instructions
Follow these steps to assemble your Uthfy Industrial Drum Fan. For a visual guide, please refer to the assembly video below.
4.1. Base Mounting
- Unscrew the screws, sockets, and washers from the wheel assembly.
- Install the wheels and wheel assembly onto one of the fan cradle base pieces, securing them with the screws, washers, and sockets in sequence.
- Attach the spacer tube between the two fan cradle base pieces and fix it with the two 5/8" screws.
4.2. Attaching the Fan Unit
- Unscrew the tightening knobs on both sides of the fan unit.
- Install the four support tubes onto the fan unit, securing them with the knobs on both sides.
- Unscrew the preinstalled screws from the support tubes.
- Attach the fan unit (with support tubes) onto the assembled base. Ensure the handle and wheels are on the opposite side of the fan unit for proper balance and mobility.
- Reattach the four 3/8" screws to secure the support tubes to the base and tighten them.
- Tighten up the wheels using an adjustable wrench to ensure stability.
4.3. Adjusting the Tilt Angle
- Adjust the fan to the desired angle by loosening the tilt-angle knobs on both sides of the fan unit.
- Once the desired angle is set, tighten the knobs firmly to secure the fan in position.
Video 1: Detailed assembly instructions for the Uthfy Industrial Drum Fan.
5. Operating Instructions
Your Uthfy Industrial Drum Fan is designed for powerful and efficient air circulation. Follow these steps for operation:
5.1. Power Connection
- Ensure the fan is placed on a stable surface.
- Plug the power cord into a standard 120V, 60Hz electrical outlet.
5.2. Speed Control
The fan features a 3-speed control switch located on the back of the fan housing. Rotate the knob to select your desired airflow:
- 0: Off
- 1: Low Speed (approx. 4800 CFM)
- 2: Medium Speed (approx. 6000 CFM)
- 3: High Speed (approx. 8800 CFM)
Figure 2: Fan with speed options and airflow capacity.
5.3. Tilt Adjustment
The fan head can be tilted 360 degrees to direct airflow precisely where needed. Loosen the tilt-angle knobs on both sides of the fan, adjust the head to the desired angle, and then firmly tighten the knobs to secure it.
Video 2: Demonstration of the Uthfy Industrial Heavy Duty Fan's features, including speed and tilt adjustment.
5.4. Portability
The fan is equipped with a portable handle and non-skid rubber wheels for easy movement and placement. Simply lift the fan by the handle and roll it to your desired location.
Figure 3: The fan is suitable for various environments including garages, workshops, gyms, and during house decoration.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your fan.
6.1. Cleaning
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to clean the exterior surfaces. Do not use abrasive cleaners or solvents.
- To clean the fan blades, carefully remove the front grille (if removable, refer to assembly steps in reverse). Wipe the blades with a soft cloth. Ensure the grille is securely reattached before operating the fan.
- Do not immerse the fan in water or allow water to drip into the motor housing.
6.2. Storage
- When not in use, store the fan in a cool, dry place.
- If storing for an extended period, cover the fan to protect it from dust.
7. Troubleshooting
If your fan is not operating correctly, consult the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply Power cord not securely plugged in Speed control switch is off | Check power outlet and circuit breaker Ensure power cord is fully inserted Turn the speed control switch to 1, 2, or 3 |
| Reduced airflow | Fan blades or grille are dirty Obstruction in front or behind the fan | Clean fan blades and grille (refer to Maintenance section) Remove any obstructions |
| Unusual noise or vibration | Fan not on a level surface Loose components Foreign object in fan blades | Place fan on a firm, level surface Check all screws and connections for tightness Unplug fan and carefully inspect for foreign objects, remove if found |
If the problem persists after attempting these solutions, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Uthfy |
| Model Name | Uthfy 24 Inch Yellow Floor Fan with 360° Adjustable Tilting |
| Model Number | HY-FDG24 Y |
| Size | 24 Inch |
| Color | Yellow |
| Power Source | AC |
| Voltage | 120V |
| Frequency | 60Hz |
| Wattage | 320W |
| Number of Speeds | 3 |
| Air Flow Capacity | 8800 Cubic Feet Per Minute (CFM) |
| Noise Level | 70 Decibels |
| Product Dimensions (D x W x H) | 27.9" x 16.51" x 26.92" |
| Item Weight | 24.2 lbs |
| Material | Metal (Alloy Steel Blades) |
| Special Features | 360° Adjustable Tilt, Portable and Movable, ETL-Listed |
| Recommended Uses | Garage, Basement, Industry, Market, Gym, Patio, Warehouse |
| UPC | 774882247609 |
9. Warranty and Support
9.1. Warranty Information
This Uthfy Industrial Drum Fan comes with a 1-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.
9.2. Customer Support
For any questions, technical assistance, or warranty inquiries, please contact Uthfy customer support through the retailer's platform or the official Uthfy website. Provide your model number (HY-FDG24 Y) and purchase details for faster service.