Lepro 11-inch 24W Flush Mount LED Ceiling Light & 6-inch Canless LED Recessed Lights

Lepro LED Lighting System User Manual

Models: 11-inch 24W Flush Mount LED Ceiling Light & 6-inch Canless LED Recessed Lights

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Lepro LED lighting system, which includes an 11-inch 24W Flush Mount LED Ceiling Light and a 12-pack of 6-inch Canless LED Recessed Lights. Please read this manual thoroughly before installation and keep it for future reference.

Lepro 11-inch Flush Mount LED Ceiling Light and 6-inch Canless LED Recessed Lights

Image: The Lepro lighting bundle, featuring both the 11-inch flush mount ceiling light and a set of 6-inch canless recessed lights.

Safety Information

WARNING: To reduce the risk of fire, electric shock, or injury to persons, please observe the following:

Package Contents

Your Lepro LED lighting system package should contain the following items:

Setup and Installation

1. 11-inch 24W Flush Mount LED Ceiling Light Installation

  1. Turn off Power: Before starting, ensure the power to the light fixture location is turned off at the circuit breaker.
  2. Prepare Wiring: Carefully pull the electrical wires from the junction box in the ceiling.
  3. Mount Bracket: Attach the mounting bracket to the junction box using the provided screws. Ensure it is securely fastened.
  4. Connect Wires: Connect the house wiring to the fixture wires using the provided wire nuts. Connect the live (black) wire to the fixture's live wire, the neutral (white) wire to the fixture's neutral wire, and the ground (green or bare copper) wire to the fixture's ground wire.
  5. Secure Fixture: Tuck the wires into the junction box and align the fixture with the mounting bracket. Secure the fixture to the bracket using the screws provided.
  6. Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Installed Lepro 11-inch Flush Mount LED Ceiling Light

Image: An 11-inch Lepro flush mount LED ceiling light installed on a ceiling, demonstrating its slim profile and bright illumination.

Lepro 11-inch Flush Mount LED Ceiling Light in a bathroom

Image: The 11-inch Lepro flush mount LED ceiling light installed in a modern bathroom, highlighting its IP54 water resistance and suitability for damp environments.

2. 6-inch Canless LED Recessed Light Installation

  1. Turn off Power: Ensure the power to the installation area is turned off at the circuit breaker.
  2. Cut Hole: Use the provided 1:1 hole template to mark and cut a 6.25-inch (15.9 cm) diameter hole in the ceiling. Ensure there are no obstructions (joists, pipes, wires) in the ceiling space.
  3. Connect Junction Box: Open the junction box cover. Connect the house wiring (live, neutral, ground) to the corresponding wires inside the junction box using wire nuts. Close the junction box cover securely.
  4. Insert Junction Box: Place the connected junction box through the cut hole into the ceiling.
  5. Connect Light to Junction Box: Connect the male connector from the recessed light to the female connector on the junction box. Ensure a secure connection.
  6. Install Light Fixture: Push the spring clips on the side of the recessed light upwards and insert the light fixture into the cut hole. The spring clips will hold the light securely in place against the ceiling.
  7. Restore Power: Once all recessed lights are installed, restore power at the circuit breaker.
Lepro 6-inch Canless LED Recessed Light with Junction Box

Image: A single Lepro 6-inch canless LED recessed light shown with its integrated junction box, illustrating the compact design for easy installation.

Lepro 6-inch Canless LED Recessed Light features

Image: An installed Lepro 6-inch canless LED recessed light, with icons indicating its features: 5000K Daylight, 50,000 Hrs Lifespan, 1050 Lumens, 12W, Dimmable, and CRI>80.

Operating Instructions

Both the 11-inch flush mount and 6-inch recessed lights are designed for simple operation.

CRI comparison for Lepro recessed lights

Image: A visual comparison demonstrating the effect of different Color Rendering Index (CRI) values on room lighting, highlighting the superior illumination provided by lights with CRI > 80, like the Lepro recessed lights.

Maintenance

Lepro LED lights are designed for long-term, maintenance-free operation. Follow these simple guidelines to ensure optimal performance:

Troubleshooting

Problem Possible Cause Solution
Light does not turn on. No power to the fixture.
Loose wire connection.
Faulty switch.
Check circuit breaker and wall switch.
Turn off power and check all wire connections.
Test or replace the switch.
Light flickers or dims unexpectedly. Incompatible dimmer switch.
Loose wire connection.
Ensure an LED-compatible dimmer switch is used.
Turn off power and check all wire connections.
Light is not as bright as expected. Dimmer setting too low.
Incorrect wattage for room size.
Adjust dimmer to maximum brightness.
Verify the light's lumen output meets your room's requirements.

If troubleshooting steps do not resolve the issue, please contact Lepro customer support.

Specifications

Feature 11-inch Flush Mount Light 6-inch Recessed Light
Brand Lepro
Wattage 24W (200W Equivalent) 12W
Lumen Output 2500lm 1050lm
Color Temperature 5000K Bright White / Daylight
Dimmable Yes (with compatible dimmer)
Lifespan >20,000 hours >50,000 hours
Water Resistance IP54 (Damp Rated) IP54 (Damp Rated)
CRI Not specified, assumed >80 >80
Mounting Type Ceiling Mount Canless Recessed
Required Ceiling Space N/A As little as 2 inches
Size comparison for Lepro 11-inch flush mount light

Image: A diagram showing the dimensions of the 11-inch flush mount light (11 inches diameter, 1.89 inches thickness) and a comparison of wattage, diameter, and illuminated range for 15W and 24W models.

Warranty and Support

Lepro offers an industry-leading warranty on its products to ensure customer satisfaction.

Lepro recessed light certifications and warranty

Image: A Lepro recessed light displayed alongside logos for ETL Listed, FCC, Energy Star certifications, and a "5 YEAR WARRANTY" badge, indicating product quality and support.

Related Documents - 11-inch 24W Flush Mount LED Ceiling Light & 6-inch Canless LED Recessed Lights

Preview Lepro LED Ceiling Light User Guide: Installation and Specifications
Detailed user guide for Lepro LED Ceiling Lights, including model specifications, installation instructions, safety information, and dimensions for PR1500024 and PR1500035 series.
Preview LED T8 Linear Retrofit Lamps Installation Guide
Comprehensive installation guide for Lepro LED T8 Linear Retrofit Lamps, covering safety warnings, wiring instructions for various configurations, and minimum compartment dimensions.
Preview Lepro R2 Smart LED Downlight Installation and User Guide
Comprehensive guide for installing and using the Lepro R2 Smart LED Downlight, covering app connection, voice control setup, mounting, and safety information.
Preview Lepro Dimmable Desk Lamp User Manual and Safety Guide
This document provides comprehensive instructions and safety precautions for the Lepro Dimmable Desk Lamp. It includes details on product specifications, usage, manufacturer information, and environmental compliance.
Preview Lepro BR2 Smart LED Bulb Setup and Voice Control Guide
Comprehensive guide to setting up your Lepro BR2 Smart LED Bulb. Learn how to connect via Bluetooth and WiFi, integrate with Amazon Alexa and Google Assistant, and troubleshoot common issues. Includes technical specifications and regulatory compliance information.
Preview Lepro LED Headlamp User Manual and Safety Guide
Comprehensive user manual for the Lepro LED Headlamp (Model 3200008 series), including features, operating instructions, safety precautions, and contact information.