captainrc V64

LDARC V64 1:64 Scale Mini RC Racing Car Instruction Manual

Model: V64 | Brand: captainrc

1. Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your LDARC V64 1:64 Scale Mini RC Racing Car. Please read this manual thoroughly before using the product.

Safety Information: This product is recommended for users aged 14 years and up.

2. Package Contents

Verify that all items are present in your package:

  • LDARC V64 Mini RC Car (Grey)
  • Remote Control Transmitter (CT01 8-channel or similar)
  • USB Type-C Charging Cable
  • 1 Lithium Polymer Battery (pre-installed or separate)
  • DIY Interchangeable Body Case
LDARC V64 Mini RC Car package contents including car, remote, and extra body shell

Image: Contents of the LDARC V64 Mini RC Car package, showing the car, remote control, and an additional DIY body shell.

3. Setup

3.1 Charging the Battery

The RC car and remote control both utilize a Type-C charging port. Use the provided charging cable to charge both devices before initial use.

  1. Connect the Type-C end of the charging cable to the charging port on the RC car (typically located on the underside).
  2. Connect the other end of the charging cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
  3. Repeat the process for the remote control transmitter.
  4. Charging indicators (if present) will typically show red during charging and turn off or green when fully charged.
LDARC V64 Mini RC Car connected to a USB-C charging cable

Image: The LDARC V64 Mini RC Car being charged via its USB Type-C port.

3.2 Remote Control Pairing

Your RC car and remote control should be pre-paired. If re-pairing is necessary, refer to the specific instructions included with your remote control model (CT01 or alternative).

4. Operating Instructions

4.1 Remote Control Functions (CT01 Transmitter)

The CT01 8-channel remote control offers precise control over your RC car. Familiarize yourself with its layout and functions:

Diagram of LDARC CT01 8-channel remote control with labeled functions

Image: Diagram illustrating the various controls on the LDARC CT01 8-channel remote control, including throttle, steering, trim, and light switches.

  • Throttle (C Beginner mode): Controls forward and reverse speed. Settings include Low, Middle, and High.
  • Direction (B Beginner mode): Controls steering sensitivity. Settings include Small, Middle, and Big.
  • TH Trim: Adjusts the neutral point of the throttle.
  • ST Trim: Adjusts the neutral point of the steering.
  • Vehicle Light Switch: Toggles vehicle lights ON/OFF.
  • High and Low Beam: Switches between high and low beam headlights.
  • Ambient Light Control: Cycles through 13 color options for the additional ambient lights (Led OFF, White, Orange, Yellow, YellowGreen, Green, CyanGreen, Cyan, CyanBlue, Blue, Purple, Magenta, Pink, Red).

4.2 Driving the RC Car

  1. Ensure both the RC car and remote control are powered on and paired.
  2. Place the car on a clean, flat surface.
  3. Use the throttle trigger to control forward and reverse movement.
  4. Use the steering wheel to control left and right turns.
  5. Experiment with the Beginner mode settings for throttle and direction to match your skill level.
Four LDARC V64 Mini RC Cars lined up on a racing track

Image: Multiple LDARC V64 Mini RC Cars positioned on a miniature racing track, ready for operation.

4.3 Light Functions

The LDARC V64 features analog light design for enhanced realism:

  • Headlights: High and low beams can be switched.
  • Turn Signals: Activate when steering left or right.
  • Brake/Reverse Lights: Illuminate during braking or reversing.
  • Dual Flashing Lights: Can be activated for hazard warning.
  • Ambient Lights: Four additional ambient lights offer 13 selectable colors.
Front view of LDARC V64 Mini RC Car with its RGB lights illuminated

Image: The front of the LDARC V64 Mini RC Car showcasing its illuminated RGB lights.

5. Maintenance

5.1 Cleaning

To ensure optimal performance and longevity, keep your RC car clean. Operate the car on clean surfaces free of debris, hair, and dust.

5.2 Battery Care

Always fully charge the battery before use and store the car with a partially charged battery if not used for extended periods. Avoid over-discharging the battery.

5.3 Interchangeable Body Case

The LDARC V64 comes with a DIY interchangeable body case, allowing for customization. To change the body:

  1. Carefully remove the existing body shell from the chassis.
  2. Position the new body shell onto the chassis, aligning any mounting points.
  3. Secure the new body shell in place.
Unpainted DIY removable body shell for the LDARC V64 Mini RC Car

Image: An unpainted DIY removable body shell, demonstrating the customization feature of the LDARC V64.

6. Troubleshooting

  • Vehicle not moving:
    Check battery level of both the car and the remote control. The car features a safety protection system: if the battery voltage is low, the front and rear headlights will flash rapidly, and the vehicle will not move. Recharge batteries as needed.
  • Remote control unresponsiveness:
    Ensure the remote control's battery is charged. If buttons become stuck or the remote behaves erratically, a factory reset may be required. Refer to the remote control's specific manual for reset procedures.
  • Poor performance:
    Ensure the driving surface is clean and free of obstructions. Check for any debris caught in the wheels or chassis.

7. Specifications

FeatureDetail
Model NumberV64
Brandcaptainrc
Scale1:64
Product Dimensions8.66 x 4.72 x 8.66 inches
Item Weight5.6 ounces
Recommended Age14 years and up
Battery Type1 Lithium Polymer (included)

8. Warranty and Support

Specific warranty details for the LDARC V64 Mini RC Racing Car are not provided in the product information. For warranty claims or technical support, please refer to the contact information provided by your retailer or the manufacturer, captainrc.

Related Documents - V64

Preview LDARC V64 1:64 Scale RC Van User Manual
Comprehensive user manual for the LDARC V64 1:64 scale remote control van, covering operation, maintenance, troubleshooting, safety guidelines, and FCC compliance.
Preview Fanvil V64/V65 User Manual
Comprehensive user manual for Fanvil V64 and V65 IP phones, covering installation, basic functions, advanced features, network configurations, and troubleshooting.
Preview Fanvil V64 Quick Installation Guide
This guide provides instructions for installing and configuring the Fanvil V64 IP phone, covering unboxing, physical connections, network setup (Ethernet and Wi-Fi), phone configuration via LCD menu and web, language settings, and basic call operations.
Preview Fanvil Phone Release Notes - Software Updates and Improvements
Detailed release notes for Fanvil IP phones, covering software versions, new features, improvements, and bug fixes for models like V50P, V60W, V60P, V61W, V61G, V62W, V62G, V62 Pro, V63, and V64. Includes information on wireless handset upgrades, customization options, and performance optimizations.
Preview Fanvil IP Phone Monoc Vision Firmware Release Notes
Detailed release notes for Fanvil IP phone firmware, including version history, new features, improvements, and bug fixes for models such as V60P, V60W, V61G, V61W, V62G, V62W, V62 Pro, V63, V64, and V50P.
Preview Fanvil IP Phone Release Notes - Software Updates and Bug Fixes
This document provides detailed release notes for Fanvil IP phones, covering software version updates, new features, improvements, and bug fixes for various models including V62, V64, X4U-V2, X7-V2, and X210i-V2.