Product Overview
The WILPREP Commercial Gas Floor Fryer is a robust and efficient deep fryer designed for demanding kitchen environments. Featuring a 3-burner system with a total output of 90,000 BTU, it is capable of quickly frying a variety of foods. Its 40 lb. oil capacity and precise temperature controls ensure consistent results, while its stainless steel construction and thoughtful design facilitate easy cleaning and long-term durability.
Image: The WILPREP Commercial Gas Floor Fryer, showcasing its stainless steel construction and two fry baskets filled with french fries.
Safety Information
Always prioritize safety when operating commercial kitchen equipment. This fryer uses gas and hot oil, which can pose significant hazards if not handled correctly.
- Ensure proper ventilation in the kitchen area.
- Do not operate the fryer without sufficient oil.
- Keep flammable materials away from the fryer.
- Use caution when handling hot oil and hot surfaces.
- In case of a gas leak, immediately shut off the gas supply and ventilate the area. Do not operate any electrical switches.
- The fryer is equipped with an automatic gas supply cut-off at 450°F for enhanced safety.
- This product is CSA certified, indicating compliance with North American safety standards.
Image: The fryer displaying its CSA certification and other safety compliance logos.
Setup and Installation
Proper installation is crucial for the safe and efficient operation of your fryer. It is highly recommended that installation and gas connections be performed by a qualified professional.
1. Unpacking
Carefully remove the fryer from its packaging. Inspect for any shipping damage. Retain packaging materials for future transport or return if necessary.
2. Placement
Place the fryer on a level, non-combustible surface. Ensure adequate clearance from walls and other equipment for ventilation and maintenance access.
3. Adjusting Feet
The fryer is equipped with 4 adjustable feet. Rotate the feet to customize the working height from 6 inches to 7-1/2 inches and ensure the unit is stable and level. This also allows for easier cleaning underneath the unit.
Image: Detail of the adjustable legs, illustrating how to customize the working height.
4. Gas Connection
Connect the fryer to the appropriate liquid propane gas supply. All gas connections must comply with local codes and be performed by a licensed gas technician. Ensure all connections are leak-tested before operation.
5. Initial Cleaning
Before first use, clean the fry pot and baskets with warm, soapy water. Rinse thoroughly and dry completely to remove any manufacturing residues.
Operating Instructions
1. Filling the Fry Pot
Ensure the drain valve is closed. Fill the fry pot with cooking oil to the indicated 'MIN' and 'MAX' fill lines. Do not overfill or underfill.
2. Ignition Procedure
- Turn the thermostat control knob to the 'OFF' position.
- Open the gas supply valve to the fryer.
- Follow the specific ignition instructions located on the fryer's control panel or inside the access door to light the pilot light.
- Once the pilot is lit, turn the thermostat control knob to the desired temperature setting. The main burners will ignite.
3. Temperature Control
The fryer features a millivolt control thermostat, allowing precise temperature adjustment from 200°F to 400°F. Set the knob to the temperature appropriate for the food being fried. The fryer automatically cuts off the gas supply if the temperature exceeds 450°F as a safety measure.
Image: The precision temperature control dial, showing settings from 200°F to 400°F and the auto-cutoff feature.
4. Using Fry Baskets
The fryer includes two 1.5 lb. detachable fry baskets with coated handles for heat protection and comfort. Load food into the baskets, ensuring not to overload. The baskets can be hung at two different heights for convenient oil draining after frying.
Image: A user demonstrating the use of the 1.5 lb. fry baskets, highlighting the two hanging heights for draining.
Maintenance and Cleaning
Regular cleaning and maintenance will extend the life of your fryer and ensure optimal performance.
1. Oil Draining and Filtering
The built-in full port drain valve makes draining used oil quick and easy. Ensure the oil has cooled to a safe temperature before draining. Filter the oil regularly to remove food particles and extend its lifespan.
2. Fry Pot Cleaning
After draining the oil, clean the fry pot with a non-abrasive cleaner and hot, soapy water. Rinse thoroughly and dry completely. For stubborn residue, a fryer cleaning solution may be used following manufacturer instructions.
Image: An internal view of the fryer, highlighting the oil drain valve and its extension for easy cleaning.
3. Exterior Cleaning
Wipe down the stainless steel exterior with a damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads that can scratch the surface.
4. Burner and Pilot Maintenance
Periodically inspect the burners and pilot light for any blockages or debris. Clean as necessary, ensuring gas orifices are clear. This should ideally be done by a qualified technician during routine maintenance checks.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fryer not heating | No gas supply; Pilot light out; Thermostat set too low; Safety cut-off activated. | Check gas valve; Relight pilot; Adjust thermostat; Allow unit to cool and reset. |
| Uneven heating | Burners partially clogged; Insufficient gas pressure. | Clean burners; Consult a gas technician to check pressure. |
| Excessive smoke/odor | Old or contaminated oil; Food particles burning. | Replace oil; Filter oil regularly; Clean fry pot thoroughly. |
| Gas smell | Gas leak. | Immediately shut off gas supply, ventilate area, and contact a qualified gas technician. Do not operate. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | LPCGF90 |
| Brand | Wilprep |
| Material | Stainless Steel |
| Color | Silver |
| Product Dimensions (D x W x H) | 45.74" x 30.12" x 15.55" |
| Item Weight | 134.48 Pounds |
| Wattage (Equivalent) | 26375 watts |
| Oil Capacity | 40 Pounds |
| BTU Output | 90,000 BTU (Total) |
| Temperature Range | 200-400°F (Auto shutoff at 450°F) |
| Fry Baskets | Two 1.5 lb. detachable baskets |
| Certifications | CSA Certified |
Image: A visual representation of the fryer's dimensions and key specifications.
Warranty and Support
Wilprep products are manufactured to high standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Wilprep website.
For technical support, parts, or service inquiries, please contact Wilprep customer service. Contact information can typically be found on the product packaging or the brand's official website.
You can visit the official Wilprep store for more information: Wilprep Store
