WLIVE ACTG002KF

WLIVE Night Stand with Charger Station Instruction Manual

Model: ACTG002KF

Brand: WLIVE

Introduction

Thank you for choosing the WLIVE Night Stand with Charger Station. This multi-functional furniture piece is designed to enhance your bedroom or living room with convenient storage and integrated charging capabilities. Featuring a farmhouse-style design, two wooden storage drawers, and a built-in power station with USB ports and AC outlets, this nightstand offers both aesthetic appeal and practical utility. Please read this manual carefully before assembly and use to ensure proper setup and long-lasting enjoyment of your product.

WLIVE Night Stand with Charger Station, Dark Rustic Oak

Image: The WLIVE Night Stand in Dark Rustic Oak, showcasing its design and integrated charging cable.

Safety Information

  • Always follow assembly instructions carefully.
  • Do not overload the nightstand. Maximum weight recommendation is 110 pounds.
  • Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as needed.
  • Keep liquids away from the charging station to prevent electrical hazards. The built-in power design helps prevent issues from spills, but caution is still advised.
  • Use only in indoor environments.
  • Keep small parts away from children during assembly.

Parts List

Before beginning assembly, please verify that all components listed in your product's included instruction manual are present. The package typically includes:

  • Wooden panels (top, side, back, drawer components)
  • Metal glides for drawers
  • Integrated charging station with 2 USB ports and 2 AC outlets
  • Assembly hardware (screws, dowels, cam locks, etc.)
  • Assembly tools (screwdriver)

Refer to the detailed diagram in your physical manual for specific part identification and quantities.

Setup and Assembly

Assembly of the WLIVE Night Stand is designed to be straightforward. Follow the steps below, referring to the visual guide and video for clarity. A screwdriver is recommended for assembly.

Assembly Video Guide

Video: Detailed assembly instructions for the WLIVE Night Stand with Charging Station. This video provides a step-by-step visual guide to help you put together your nightstand efficiently.

Key Assembly Steps:

  1. Prepare Side Panels: Attach the necessary hardware (e.g., cam bolts) to the pre-drilled holes on the side panels (parts 4 and 5). Ensure they are securely fastened.
  2. Install Drawer Glides: Secure the drawer glides (CL and CR) to the inner sides of the main frame using screws (G). Pay attention to the "FRONT" markings on the glides to ensure correct orientation for smooth drawer operation.
  3. Assemble Base and Supports: Connect the base support bars (parts 6 and 7) to the side panels using dowels (B) and cam locks (C). This forms the main structure of the nightstand.
  4. Attach Back Panel: Slide the back panel (part 12) into the grooves of the assembled frame. Secure it with screws (C) as indicated in the manual.
  5. Install Charging Station: Position the charging station (M) in its designated slot, typically on the top shelf or back panel. Secure it using screws (G). Route the power cord through the provided opening.
  6. Assemble Drawers: For each drawer, attach the side panels (part 9) to the front (part 11) and back (part 8) panels using cam bolts (A) and cam locks (C). Slide the bottom panel (part 10) into the grooves. Attach the drawer glides (DL and DR) to the sides of the drawer box using screws (G). Finally, attach the handle (H) to the front of the drawer using screws (I).
  7. Insert Drawers: Carefully align the assembled drawers with the glides on the main frame and slide them in until they are fully seated.
Close-up of nightstand features including power outlet, drawers, and solid wood feet.

Image: Detailed view of the nightstand's features, including the power outlet, two drawers, solid wood feet, and smooth sliding drawer mechanism.

Operating Instructions

The WLIVE Night Stand features an integrated charging station for your convenience.

  • Power Connection: Plug the nightstand's main power cord into a standard wall outlet.
  • USB Charging: Use the two 5V/2.1A USB ports to charge your smartphones, tablets, and other USB-powered devices.
  • AC Outlets: The two 125V/12A AC outlets are suitable for powering lamps, alarm clocks, laptops, or other small appliances.
  • Cable Management: Utilize the open shelf and cable pass-through hole to keep your charging cables organized and out of sight.
Charging station with USB ports and AC outlets on the nightstand.

Image: Close-up of the nightstand's charging station, showing the two USB ports and two AC outlets, along with a coiled power cord.

Maintenance

To maintain the appearance and longevity of your WLIVE Night Stand:

  • Cleaning: Wipe the surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
  • Spills: In case of spills, wipe immediately with a dry cloth.
  • Hardware: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
  • Placement: Avoid placing the nightstand in direct sunlight or near heat sources, as this may cause fading or warping.

Troubleshooting

ProblemPossible CauseSolution
Difficulty with assembly.Incorrect part orientation or missing steps.Review the assembly video and included manual carefully. Ensure all parts are oriented correctly before tightening.
Charging station not working.Power cord not fully plugged in; device not compatible; faulty outlet.Ensure the nightstand's power cord is securely plugged into a working wall outlet. Test with different devices or outlets.
Drawers do not slide smoothly.Drawer glides installed incorrectly or loose screws.Check the installation of the drawer glides on both the drawer and the main frame. Ensure all screws are tightened.
Nightstand feels wobbly.Loose connections or uneven floor.Check and tighten all assembly screws. Ensure the nightstand is placed on a flat, level surface.

Specifications

FeatureDetail
BrandWLIVE
Model NameACTG002 NightStand / KF
Model NumberACTG002KF
Product Dimensions17.7"D x 17.7"W x 23.7"H
Item Weight32.34 Pounds
Maximum Weight Recommendation110 Pounds
ColorDark Rustic Oak
Material TypeEngineered Wood, Metal
Number of Drawers2
USB Ports2 (5V/2.1A)
AC Outlets2 (125V/12A)
Power Cord Length4.9-Foot
Product Care InstructionsWipe with Dry Cloth

Support

If you have any questions regarding the assembly, operation, or maintenance of your WLIVE Night Stand, please do not hesitate to contact WLIVE customer support. We are committed to providing satisfactory assistance within 24 hours.

For further assistance, please refer to the contact information provided in your product packaging or visit the official WLIVE store on Amazon: WLIVE Store.

Related Documents - ACTG002KF

Preview WLIVE ABZ017 Wood Flip Side Table with Outlet Assembly Instructions
Official assembly instructions for the WLIVE ABZ017 Wood Flip Side Table with Outlet. Learn how to assemble your new side table with clear steps, parts list, and important safety information.
Preview WLIVE ACJ027 Coffee Table Installation Manual
Comprehensive installation guide for the WLIVE ACJ027 Coffee Table. This manual provides detailed steps, parts list, and safety information for assembling your multi-functional coffee table with hidden storage.
Preview WLIVE ACJ031 Wood Coffee Table Installation Manual
Step-by-step installation guide for the WLIVE ACJ031 Wood Coffee Table, including parts list, assembly instructions, and safety precautions.
Preview WLIVE ADSG019 Wood TV Stand with Leg Assembly Instructions
Comprehensive assembly instructions for the WLIVE ADSG019 Wood TV Stand with Leg, including parts list, exploded diagrams, and step-by-step guidance for assembly and adjustments.
Preview WLIVE ADSG026 Wood LED TV Stand Assembly Instructions
Comprehensive assembly instructions for the WLIVE ADSG026 Wood LED TV Stand, including parts list, diagrams, and wiring information.
Preview WLIVE ADSG031 SW Vintage TV Stand Assembly Instructions
Comprehensive assembly guide for the WLIVE ADSG031 SW Vintage TV Stand, detailing parts, warnings, and step-by-step instructions for setup.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.