1. Important Safety Information
Always follow the assembly instructions carefully. Use caution when handling heavy components. It is recommended to have two people for assembly to prevent injury.
- Ensure all parts are present and undamaged before assembly.
- Do not overtighten screws, as this may damage the material.
- Keep small parts away from children during assembly.
- Place the nightstand on a flat, stable surface.
- Do not exceed the maximum load capacity of 100 lbs.
- Avoid exposing the nightstand to direct sunlight or extreme temperatures.
- Disconnect power before cleaning or moving the unit.
2. Package Contents
Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- Nightstand Panels (various sizes)
- 3 Drawer Sets (fronts, sides, backs, bottoms)
- Drawer Slides (pre-installed or separate)
- Wireless Charging Station with USB/Type-C/AC Outlets
- LED Light Strip (pre-installed or separate)
- LED Remote Control
- Assembly Hardware (screws, dowels, cam locks, etc.)
- Assembly Tools (Allen wrench, screwdriver)
- Instruction Manual
3. Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
- Unpack and Identify Parts: Lay out all components on a clean, soft surface to prevent scratches. Refer to the parts list in your manual to identify each piece.
- Assemble the Main Frame: Connect the side panels to the base and top panels using the provided hardware (dowels, cam locks, screws). Ensure all connections are secure.
Image: Initial assembly of the nightstand frame, showing panels being connected.
- Install LED Lights (if separate): If your LED light strip is not pre-installed, carefully attach it to the designated area, usually within the open shelf section, following the adhesive backing. Ensure the cable is routed correctly.
Image: Installation of the LED light strip in the open shelf area.
- Assemble Drawers: For each drawer, connect the side, back, and front panels. Insert the drawer bottom into the grooves. Secure with screws. Attach the drawer slides to the drawer sides.
Image: Step-by-step guide for assembling a drawer.
- Install Drawer Slides to Frame: Attach the corresponding drawer slides to the interior of the nightstand frame. Ensure they are level and aligned.
- Insert Drawers: Carefully slide the assembled drawers into the installed drawer slides on the nightstand frame. Ensure they open and close smoothly.
Image: Inserting the completed drawers into the nightstand.
- Install Charging Station: Place the wireless charging station into the pre-cut opening on the top panel. Secure it if necessary and connect its power cable to the main power source.
Image: Placement of the charging station on the nightstand's top surface.
- Final Connections: Connect the LED light strip to its power source, typically integrated with the main power cable of the charging station. Plug the nightstand into a wall outlet.
For a visual guide, refer to the installation video provided by the manufacturer.
4. Operating Instructions
4.1 Wireless Charging Station
The nightstand is equipped with a 15W wireless charging pad, one USB port, one Type-C port, and two AC outlets.
- Wireless Charging: Place your Qi-compatible device (smartphone, earbuds) directly onto the wireless charging pad located on the top surface. Ensure the device is centered for optimal charging. A charging indicator may appear on your device.
- USB/Type-C Ports: Connect your devices using appropriate USB-A or USB-C cables to the respective ports for wired charging (5V/2A output).
- AC Outlets: Plug in standard electronic devices into the two 120V/12A AC outlets.
Image: The integrated charging station with wireless charging, USB, Type-C, and AC outlets.
4.2 LED Lights
The built-in RGB LED lights can be controlled via the included remote or a dedicated smartphone application.
- Remote Control: Use the 24-key remote to power the lights on/off, change colors (over 16 million options), adjust brightness (10 levels), select lighting modes (static, flash, music sync, mix effects), and set timers.
- App Control: Download the recommended app (refer to the manual for QR code or name) to access advanced features, including custom color creation, music synchronization, and scheduling.
Image: Examples of LED light colors and control options via remote and app.
5. Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the high-gloss finish.
- Dusting: Regularly dust the nightstand to prevent buildup.
- Power Unit: Keep the charging station free from dust and debris. Do not spill liquids on the charging ports or wireless pad.
- Drawer Care: Periodically check drawer slides for smooth operation. If drawers become stiff, a small amount of silicone lubricant can be applied to the slides.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not working | Power disconnected, remote battery low, light strip damaged. | Check power connection. Replace remote battery. Ensure light strip is properly connected. |
| Wireless charging not working | Device not Qi-compatible, device not aligned, foreign objects on pad, power disconnected. | Verify device compatibility. Reposition device. Remove any objects. Check power. |
| USB/AC outlets not working | Power disconnected, overloaded circuit. | Check main power connection. Ensure total power draw does not exceed unit's capacity. |
| Drawers stick or don't close properly | Misaligned slides, obstruction, loose hardware. | Recheck assembly of drawer slides. Clear any obstructions. Tighten hardware. |
7. Specifications
- Brand: HOMMPA
- Model Name: 06XLXXL
- Model Number: Nightstand wl-3
- Dimensions (D x W x H): 19.7" x 15.8" x 26.8"
- Item Weight: 46.3 Pounds
- Material: Engineered Wood (Particleboard, MDF)
- Color: Black
- Finish Type: High Gloss (front panels), Matte (other surfaces)
- Number of Drawers: 3
- Number of Shelves: 1 (open shelf)
- Wireless Charging: 15W
- USB Ports: 1 x USB-A (5V/2A), 1 x Type-C (5V/2A)
- AC Outlets: 2 x 120V/12A
- LED Lights: RGB, adjustable brightness, multiple modes (remote/app control)
- Max Load Capacity: 100 lbs
- Assembly Required: Yes (Recommended 2 people)
Image: Product dimensions and key features.
8. Warranty and Support
For warranty information, missing parts, or technical support, please contact HOMMPA customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.