1. Introduction
This manual provides essential information for the setup, operation, and maintenance of your Carrera GO!!! Electric Powered Slot Car Racing Set, model "Flying Lap". This set offers an exciting and dynamic racing experience for enthusiasts aged 6 and up.
The Carrera GO!!! "Flying Lap" set features a 1:43 scale track system, two highly detailed 1:43 scale slot cars (Ferrari SF-23 "C. Sainz, No.55" and Red Bull Racing RB19 "M. Verstappen, No.1"), and two speed controllers with turbo boost functionality. The assembled track measures approximately 6.00 ft x 2.62 ft (183 cm x 80 cm) and has a total length of 14.11 ft (4.3 m).
Image: The Carrera GO!!! Flying Lap set, showing the product box and the assembled track with two slot cars.
2. Safety Information
Caution: Electric Toy - Not recommended for children under 8 years of age.
As with all electric products, precautions should be observed during handling and use to prevent electric shock. Please read and understand all safety warnings before operating the product.
- Always supervise children during play.
- Do not use the product near water or in wet conditions.
- Ensure all connections are secure before plugging into a power source.
- Unplug the power adapter when not in use or during cleaning.
- Do not attempt to modify the electrical components of the set.
- Keep fingers and loose clothing away from moving parts.
3. Setup Guide
Follow these steps to assemble your Carrera GO!!! racing track:
3.1. Unpacking and Component Check
Carefully unpack all components from the box. Verify that all parts listed below are present:
- 1x Connection Track
- 2x Speed Controllers with Turbo Boost
- 1x Transformer (Power Adapter)
- 2x 1:43 Scale Slot Cars (Ferrari SF-23, Red Bull Racing RB19)
- Track sections (straights, curves, lap counter)
- Guardrails and supports for track crossover
Image: "In the Box" diagram illustrating all included components.
3.2. Track Assembly
Assemble the track sections on a flat, stable surface. The track pieces snap together securely. Refer to the assembly diagram for the standard layout:
Image: An aerial view of the fully assembled track layout, featuring an overpass and a lap counter section.
Ensure all track connections are firm to maintain consistent electrical contact. Install guardrails on curves and supports for elevated sections as indicated in the instructions.
Image: Detailed assembly information with track dimensions and component placement.
3.3. Connecting Power and Controllers
- Connect the speed controllers to the designated ports on the connection track.
- Connect the transformer (power adapter) to the connection track.
- Plug the transformer into a suitable electrical outlet.
Image: The two speed controllers included in the set.
3.4. Car Preparation
Place the slot cars onto the track, ensuring the guide pins on the bottom of the cars are correctly inserted into the track slot. The cars included are:
- Ferrari SF-23, "C. Sainz, No.55"
- Red Bull Racing RB19, "M. Verstappen, No.1"
Image: Ferrari SF-23 slot car.
Image: Red Bull Racing RB19 slot car.
4. Operating Instructions
4.1. Basic Operation
To start racing, gently press the trigger on your speed controller. The further you press, the faster your car will go. Release the trigger to slow down or stop.
4.2. Using the Turbo Button
Each speed controller is equipped with a red turbo button. Press and hold this button while accelerating to get an extra burst of speed. Use the turbo button strategically on straightaways to overtake opponents or gain a lead. Be cautious when using turbo on curves, as it can cause the car to de-slot (come off the track).
4.3. Racing Tips
- Cornering: Reduce speed before entering a curve to prevent the car from de-slotting. Accelerate gradually as you exit the curve.
- Lap Counter: The track includes a lap counter to keep track of your progress during races.
- Fair Play: Encourage fair racing and good sportsmanship.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your slot car set.
- Track Cleaning: Keep the track surface clean and free of dust and debris. Use a soft, dry cloth to wipe down the track rails.
- Car Brushes/Contacts: Periodically check the contact brushes on the underside of the cars. If they become worn or bent, they may need to be straightened or replaced to ensure good electrical contact with the track.
- Tire Condition: Ensure tires are clean and free of lint or hair for optimal grip.
- Storage: When not in use, store the track and cars in a clean, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
If you encounter issues with your Carrera GO!!! set, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not move or moves intermittently. |
|
|
| Car de-slots (comes off track) frequently. |
|
|
| Speed controller not responding. |
|
|
7. Specifications
- Model: Carrera GO!!! Flying Lap (Item #20062572)
- Scale: 1:43
- Track Length: 14.11 ft (4.3 m)
- Assembled Dimensions: 6.00 ft x 2.62 ft (183 cm x 80 cm)
- Cars Included: Ferrari SF-23 "C. Sainz, No.55", Red Bull Racing RB19 "M. Verstappen, No.1"
- Controllers: 2x Speed Controllers with Turbo Boost
- Power Source: Electric (Transformer included)
- Recommended Age: 6 years and up
- Product Dimensions (Box): 22.83 x 3.15 x 15.74 inches
- Item Weight: 5.99 pounds
8. Expansion and Accessories
The Carrera GO!!! system is designed for expandability. You can extend your track with additional track sections, add new cars, or incorporate exciting accessories like loops, jumps, and banked curves (sold separately) to create custom race layouts.
Image: Examples of multiple race track layout options possible with Carrera GO!!! sets.
9. Warranty and Support
For warranty information, technical support, or to inquire about replacement parts and accessories, please visit the official Carrera website or contact their customer service department.
