Introduction
Thank you for choosing the TRIFEBLE Night Stand Set 2. This product is designed to provide convenient bedside storage and charging capabilities, enhanced with integrated LED lighting. This manual provides essential information for safe assembly, operation, and maintenance of your new nightstands.
Important Safety Information
Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always assemble according to the instructions.
- Ensure the table is stable and anchored properly to prevent tipping.
- Do not overload the charging station.
- Keep the electrical components dry and away from heat sources.
- Unplug the charging station when not in use or during assembly.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Nightstand Frame Components (Metal, Particleboard)
- Fabric Drawer(s)
- Power Strip with 2 AC Outlets and 2 USB Ports
- LED Light Strip
- Assembly Hardware (Screws, Allen Wrench, etc.)
- Instruction Manual
Setup and Assembly
Assembly typically takes approximately 30 minutes per nightstand. It is recommended to assemble on a soft, clean surface to prevent scratches.
Step 1: Unpack and Identify Parts
Carefully remove all components from the packaging. Lay them out and compare them against the parts list provided in your physical manual to ensure everything is present.

Image: Two fully assembled TRIFEBLE nightstands, showcasing their design, LED lighting, and charging station features.
Step 2: Assemble the Frame
Follow the step-by-step diagrams in your manual to connect the metal frame components and particleboard shelves using the provided screws and tools. Ensure all connections are secure but do not overtighten until the frame is fully assembled.

Image: A diagram illustrating the dimensions of the nightstand (11.2"D x 15"W x 24.4"H) and the fabric drawer (13.5"W x 11"D x 6.3"H).
Step 3: Install the Fabric Drawer
Once the frame is complete, insert the fabric drawer into its designated slot. Ensure it slides smoothly.
Step 4: Install the Charging Station and LED Light Strip
Integrate the power strip into the designated cutout on the top panel. Route the LED light strip along the interior edges of the open shelf as instructed in your manual. Connect the power cord.

Image: A detailed view of the nightstand's top panel, highlighting the integrated charging station with two AC outlets (125V/12A) and two USB ports (5V/2A), along with its 4.9-foot power cord.

Image: An illustration of the modern LED light strip features, including key control and app control options for over 6000 colors, mic mode, music mode, and timing mode.
Step 5: Adjust Feet
Adjust the four adjustable feet at the bottom of the nightstand to ensure stability on uneven floors.

Image: A close-up view demonstrating the adjustable feet feature, which helps stabilize the nightstand on various floor surfaces.
Operating Instructions
Using the Charging Station
Plug the nightstand's main power cord into a standard wall outlet. The integrated power strip provides 2 AC outlets and 2 USB ports for charging electronic devices. Ensure devices are compatible with the provided voltage and current specifications.
- AC Outlets: 125V/12A
- USB Ports: 5V/2A
Controlling the LED Light Strip
The LED light strip can be controlled via a manual key or a smartphone application.
- Manual Key Control: Use the inline controller on the LED strip cable to cycle through colors, adjust brightness, and change dynamic modes.
- Smartphone App Control: Download the designated app (refer to your physical manual for QR code or app name). Connect the LED strip via Bluetooth. The app allows access to over 6000 colors, mic mode, music mode, and timing functions.

Image: A TRIFEBLE nightstand in a bedroom setting, demonstrating the blue LED lighting effect.
Maintenance
Regular maintenance will help prolong the life of your nightstand.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Dusting: Regularly dust the nightstand, especially around the electrical components, to prevent dust buildup.
- Drawer Care: The fabric drawer can be spot cleaned with a mild detergent if necessary. Allow to air dry completely.
- Electrical Components: Ensure the charging station and LED lights are unplugged before cleaning. Keep them dry.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charging station not working. | Not plugged in; power outlet issue; overloaded circuit. | Ensure the main power cord is securely plugged into a functional wall outlet. Check if the wall outlet is working by plugging in another device. Reduce the number of devices connected to the charging station. |
| LED lights not turning on. | Power cord not connected; LED strip not properly plugged into power source; app connection issue. | Verify the nightstand is plugged in. Check the connection between the LED strip and its power source. If using the app, ensure Bluetooth is enabled and the app is correctly paired with the LED strip. |
| Nightstand is wobbly. | Uneven floor; loose assembly screws. | Adjust the leveling feet at the bottom of the nightstand. Tighten all assembly screws, ensuring not to overtighten. |
| Fabric drawer does not slide smoothly. | Drawer misalignment; obstruction. | Remove the drawer and reinsert it, ensuring it is properly aligned. Check for any obstructions within the drawer slot. |
Specifications
- Brand: TRIFEBLE
- Model: B0DQD7Z8YT
- Product Dimensions: 11.2"D x 15"W x 24.4"H
- Color: Black
- Top Material Type: Engineered Wood
- Frame Material Type: Metal
- Drawer Material: Fabric
- Item Weight: 17.2 Pounds
- AC Outlets: 2 (125V/12A)
- USB Ports: 2 (5V/2A)
- Power Cord Length: 4.9 feet
- LED Light: Multi-colored, App/Key Control
- Number of Drawers: 1 per nightstand
- Adjustable Feet: Yes
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official TRIFEBLE website. Please have your model number (B0DQD7Z8YT) ready when contacting support.