1. Introduction
This manual provides essential information for the installation, operation, and maintenance of the Honeywell PRO42IC PRO4200 Intelligent Controller. The PRO42IC is a key component in advanced access control systems, designed to manage and monitor access points efficiently and securely. Please read this manual thoroughly before attempting any installation or operation.
2. Safety Information
WARNING: Risk of Electric Shock. Disconnect power before servicing.
Always follow local electrical codes and regulations. Installation and servicing should only be performed by qualified personnel. Ensure all wiring is correctly terminated and secured. Do not operate the device if it appears damaged. Keep the device away from moisture and extreme temperatures.
3. Package Contents
Verify that all components are present before beginning installation. The standard package for the Honeywell PRO42IC PRO4200 Intelligent Controller typically includes:
- Honeywell PRO42IC PRO4200 Intelligent Controller unit
- Mounting hardware (screws, standoffs)
- Quick Start Guide or basic wiring diagram
Note: Specific contents may vary. Refer to your product packaging for an exact list.
4. Setup
4.1 Mounting the Controller
Select a suitable location for mounting the PRO42IC, typically within an enclosure, ensuring adequate ventilation and protection from environmental elements. Use the provided mounting hardware to secure the controller to a flat, stable surface.
Description: An image showing the Honeywell PRO42IC controller being mounted inside a secure enclosure, highlighting the mounting points and proper screw placement would be displayed here.
4.2 Wiring Connections
All wiring should be performed with power disconnected. Connect power, network, and access control peripherals (readers, door contacts, request-to-exit devices, locks) according to the wiring diagrams provided with your system documentation. Ensure proper polarity for all connections.
Description: A detailed wiring diagram illustrating connections for power, Ethernet, readers, and other I/O points to the PRO42IC controller would be displayed here.
4.3 Initial Power-Up
Once all connections are secure, apply power to the controller. Observe the status indicator lights (LEDs) on the unit. Refer to the LED status guide in the full technical documentation for interpretation of light patterns.
5. Operating Instructions
The Honeywell PRO42IC PRO4200 Intelligent Controller operates as part of a larger access control system, typically managed through dedicated software. This section outlines general operational aspects.
5.1 Network Configuration
The PRO42IC connects to your network via an Ethernet port. IP address configuration (DHCP or static) is typically performed through the system's management software during initial setup. Ensure the controller has a stable network connection to communicate with the host server.
5.2 System Integration
Once powered and networked, the controller will attempt to communicate with the host access control software. Use the software interface to discover the controller, assign it to a specific location, and configure its operational parameters, including reader types, door schedules, and user access levels.
Description: A video demonstrating the process of discovering and configuring the PRO42IC controller within the Honeywell access control management software would be displayed here. This video would show steps like adding the device, setting network parameters, and assigning readers.
5.3 Status Indicators
The controller features various LED indicators to provide real-time status information regarding power, network activity, and communication with connected devices. Consult the comprehensive technical manual for a detailed explanation of each LED's function and state.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your PRO42IC controller.
6.1 Cleaning
Keep the controller and its enclosure free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners or solvents directly on the unit.
6.2 Firmware Updates
Periodically check the Honeywell support website for available firmware updates. Firmware updates can provide new features, performance enhancements, and security improvements. Follow the instructions provided with the firmware update package carefully.
7. Troubleshooting
This section addresses common issues you might encounter with the PRO42IC controller.
- No Power: Ensure the power supply is connected correctly and providing the specified voltage. Check circuit breakers.
- No Network Communication: Verify Ethernet cable connection. Check network settings (IP address, subnet mask, gateway). Ensure the network switch port is active.
- Reader Not Responding: Check reader wiring for correct polarity and secure connections. Ensure the reader type is correctly configured in the access control software.
- Door Not Unlocking: Verify lock wiring. Check door contact status. Ensure the access control software is sending the unlock command.
If issues persist after following these steps, contact Honeywell technical support.
8. Specifications
| Brand | Honeywell |
| Model Number | PRO42IC |
| Part Number | PRO42IC |
| Display Type | LCD or LED (for status indicators) |
| UPC | 085267557573 |
| Manufacturer | Honeywell |
9. Warranty and Support
The Honeywell PRO42IC PRO4200 Intelligent Controller comes with a standard manufacturer's warranty. For detailed warranty terms and conditions, please refer to the official Honeywell website or the documentation included with your purchase. For technical support, product registration, or service inquiries, visit the Honeywell Security website or contact your authorized Honeywell distributor.
Online Resources: Honeywell Official Website
