ALLGOOD Custom Cover for AquaCal SunBlazer SB128AHDSBLA Pool Heater LCD Display & Controls

Introduction

This manual provides instructions for the installation, operation, and maintenance of your ALLGOOD Custom Cover for the AquaCal SunBlazer SB128AHDSBLA Model Pool Heater. This cover is designed to protect the LCD display and controls of your pool heater from environmental elements, ensuring longevity and clear visibility.

Image: The ALLGOOD Custom Cover shown both installed on an AquaCal SunBlazer pool heater and as a standalone unit. The cover is a yellow, oval-shaped plastic piece designed to fit over the control panel.

Setup and Installation

Follow these steps to properly install the ALLGOOD Custom Cover:

1. Prepare the Control Panel: Locate the existing two screws that secure your AquaCal SunBlazer SB128AHDSBLA pool heater's control panel.
2. Remove Existing Screws: Carefully remove these two screws. Keep them in a safe place as they will be reused.
3. Position the Cover: Place the ALLGOOD Custom Cover directly on top of the control panel, aligning the screw holes on the cover with those on the control panel and the heater unit.
4. Secure the Cover: Reinsert the original screws through the cover and into the control panel and heater.
5. Tighten Screws: Securely tighten the screws. Important: Do not over-tighten the screws, as excessive force can cause the plastic material to crack. Tighten until snug.

Image: A detailed view of the ALLGOOD Custom Cover, showing the hinge mechanism and the pre-drilled screw holes for installation. This highlights the points where the cover attaches to the heater's control panel.

Operating Instructions

The ALLGOOD Custom Cover is designed for simple operation:

• Accessing Controls: To access your pool heater's LCD display and controls, simply lift the hinged cover. The cover is designed to open and close easily.
• Protecting Controls: When the pool heater's display and controls are not in use, ensure the cover is closed. This protects them from direct sunlight, rain, and other environmental factors.

Image: The ALLGOOD Custom Cover shown in an open position on an AquaCal SunBlazer pool heater, providing full access to the LCD display and control buttons. This demonstrates the cover's functionality for protecting and revealing the panel.

Maintenance

To ensure the longevity and effectiveness of your ALLGOOD Custom Cover, follow these maintenance guidelines:

• Cleaning: Clean the cover periodically with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the ABS plastic.
• Storage: If the cover needs to be removed for an extended period, store it in a cool, dry place to prevent deformation or damage.
• Usage: Ensure the cover is properly secured when installed. Remove the cover or keep it open when the pool heater's display needs to be actively monitored or adjusted for extended periods to prevent heat buildup, although the cover is designed to withstand high temperatures.
• Compatibility: This cover is specifically designed for the AquaCal SunBlazer SB128AHDSBLA Model Pool Heater. Do not attempt to use it with incompatible heaters.

Troubleshooting

If you encounter any issues with your ALLGOOD Custom Cover, refer to the following:

• Cover Does Not Fit: Verify that your pool heater is the AquaCal SunBlazer SB128AHDSBLA model. This cover is custom-designed for this specific model and may not fit others.
• Cracked Plastic After Installation: This typically occurs due to over-tightening the screws. Ensure screws are tightened only until snug, avoiding excessive force.
• Display Still Fading/Damaged: While the cover provides protection against external elements, it is an accessory. Ensure the pool heater's control panel itself is properly maintained and functioning. If issues persist, consult your pool heater's manufacturer manual or a qualified technician.

Specifications

Image: A close-up view of the ALLGOOD Custom Cover, highlighting the 'ABS MATERIAL' label, indicating the durable plastic construction designed for outdoor use and resistance to high temperatures and sunlight.

Warranty Information

Specific warranty details for the ALLGOOD Custom Cover are not provided in this manual. Please refer to the product packaging or contact ALLGOOD customer service for information regarding warranty coverage.

Customer Support

For further assistance or inquiries regarding your ALLGOOD Custom Cover, please visit the ALLGOOD store on Amazon or refer to the contact information provided with your purchase.