Introduction
This manual provides detailed instructions for the safe and effective use of your Ya-man Rei Beaute Cool Pro. Please read this manual thoroughly before use and keep it for future reference.
Image: The Ya-man Cool Pro device, featuring a sleek white and gold design. The image displays the main body of the device, highlighting its control panel and the area where attachments are connected. This is the primary image of the product.
Product Overview
The Ya-man Rei Beaute Cool Pro is a high-power light beauty device equipped with a cooling function, designed for at-home hair removal care. It features a wide irradiation area for speedy treatment and multiple attachments for different body parts.
Included Components
- Main Unit
- Roller Attachment
- LED Attachment
- Spot Attachment
- V-Design Tool
- AC Adapter
- Instruction Manual (with Warranty)
Safety Precautions
WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons, read all instructions before using this product.
- Do not use on irritated or damaged skin.
- Avoid direct eye contact with the light.
- Keep out of reach of children.
- Consult a physician before use if you have any pre-existing medical conditions.
- Ensure the device is fully charged or properly connected to power before use.
Setup
- Unpacking: Carefully remove all components from the packaging. Retain packaging for storage or future transport.
- Charging: Connect the AC adapter to the device and a power outlet. Charge the device fully before first use. The charging indicator will show status.
- Attachment Selection: Choose the appropriate attachment for the area you intend to treat.
- Roller Attachment: For large areas like legs, arms, and abdomen. Automatically adjusts intensity based on skin tone and allows continuous irradiation.
- LED Attachment: For facial areas like cheeks and around the mouth.
- Spot Attachment: For small or sensitive areas such as O-line, I-line, V-line, and fingers.
- Attaching: Align the chosen attachment with the device head and gently push until it clicks into place.
Operating Instructions
Preparation Before Use
- Cleanse the skin area to be treated.
- Shave the hair in the treatment area if necessary.
- Perform a patch test on a small skin area 24 hours before full treatment to check for adverse reactions.
Usage Steps
- Power On: Press and hold the power button to turn on the device.
- Cooling Function: The cooling function activates automatically. Allow a few moments for the cooling plate to become cold. This helps minimize heat sensation during irradiation.
- Skin Contact: Place the attachment firmly against the skin. The device will detect skin tone and automatically set the appropriate light intensity. A blue-white lamp will illuminate when proper contact is made.
- Irradiation:
- For Roller Attachment: Slide the device across the skin. It will automatically irradiate continuously (up to 7 flashes).
- For LED/Spot Attachments: Press the flash button to irradiate.
- Repeat: Move to the next area and repeat the process. Avoid overlapping flashes on the same spot too frequently.
- Power Off: Press and hold the power button to turn off the device after use.
Important Notes on Continuous Use
If the device becomes warm during extended use, a high-temperature sensor will activate, and the power will automatically turn off. The fan may continue to run for cooling. This is not a malfunction. Allow the device to cool down for approximately 10 minutes before resuming use. It is designed for shared use among family or couples.
Maintenance
- Cleaning: After each use, wipe the light window and cooling plate with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device and its attachments in a cool, dry place, away from direct sunlight and moisture.
- Battery Care: If not using the device for an extended period, charge it at least once every three months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or not connected to power. | Charge the device fully. Ensure AC adapter is securely connected. |
| No flash when pressing the button. | Poor skin contact or device overheated. | Ensure the attachment is in full contact with the skin. If overheated, allow the device to cool down for 10 minutes. |
| Device automatically shuts off. | Overheating protection activated. | This is normal. Allow the device to cool down before resuming use. |
| Pain or discomfort during use. | Intensity level too high or sensitive skin. | The device automatically adjusts intensity. If discomfort persists, discontinue use and consult a professional. The cooling function should minimize discomfort. |
Specifications
- Model Number: YJEA6W
- Brand: Ya-man
- Color: White x Gold
- Power Source: Corded Electric
- Product Weight: 420 grams
- Package Dimensions: 27.9 x 21.1 x 7.1 cm
- Wattage: 22 W
- Recommended Use: Hair removal care
Warranty and Support
This product comes with a manufacturer's warranty. Please refer to the warranty card included in the package for details regarding coverage and duration. For technical support, repairs, or inquiries, please contact Ya-man customer service.
Contact Information: Please refer to the official Ya-man website or the contact details provided in your warranty documentation.
Note: Some customer reviews mention a 1-year warranty period and good customer service for repairs. Please verify the exact warranty terms with the manufacturer.