Emerson EAP-1001 Power Strip Tower User Manual

Introduction

This user manual provides essential information for the safe and efficient operation of your Emerson EAP-1001 5-Outlet Power Strip Tower. Please read this manual thoroughly before using the device and retain it for future reference.

Image: The Emerson EAP-1001 Power Strip Tower, a white vertical power strip with multiple outlets and USB ports, shown from an angled perspective.

Product Features

• 5 AC Outlets: Provides power for multiple electronic devices simultaneously.
• 3 USB Charging Ports: Offers convenient charging for smartphones, tablets, and other USB-powered devices without requiring additional adapters.
• Surge Protection: Protects connected devices from power spikes and surges.
• Overload Protection: Automatically shuts off power if the connected load exceeds the safe limit, enhancing safety.
• Space-Saving Tower Design: Vertical design minimizes desk or floor space usage while providing easy access to all ports.

Image: The Emerson EAP-1001 Power Strip Tower positioned centrally, with text overlay highlighting its key features: 5 outlets, 3 USB ports, surge protection, and overload protection.

Safety Information

To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:

• Do not exceed the electrical ratings of the power strip. Refer to the specifications section for details.
• Do not use in wet environments or near water.
• Do not disassemble or modify the device.
• Keep out of reach of children.
• Ensure the power cord is fully inserted into a grounded wall outlet.
• Avoid placing the power strip in direct sunlight or near heat sources.
• If the overload protection trips, disconnect some devices before resetting the power strip.

Setup

1. Unpack: Carefully remove the power strip tower from its packaging.
2. Placement: Place the power strip tower on a stable, flat surface, ensuring adequate ventilation. Its vertical design is ideal for desks or floors where space is limited.
3. Connect to Power: Plug the power strip's cord into a standard 125V grounded wall outlet.
4. Verify Indicators: Once plugged in, check the indicator lights on the top of the tower. The "GROUNDED" and "PROTECTED" indicators should illuminate, confirming proper grounding and surge protection functionality.

Image: The Emerson EAP-1001 Power Strip Tower positioned on a wooden desk, demonstrating its compact and space-saving design in a typical home or office environment.

Operating Instructions

1. Power On/Off: Use the main ON/OFF switch located on the front of the tower to control power to all connected AC outlets and USB ports. Press the switch to turn power on or off.
2. Connecting AC Devices: Plug your devices into any of the 5 AC outlets. Ensure the plugs are fully inserted.
3. Connecting USB Devices: Connect your USB charging cables to the 3 USB ports. The ports are designed to provide power for charging compatible devices.
4. Overload Protection: If the total power draw of connected devices exceeds the maximum capacity (15 Amps), the overload protection will automatically trip, cutting power to prevent damage. To reset, unplug some devices and then press the ON/OFF switch to restore power.

Image: A hand is shown pressing the power switch on the Emerson EAP-1001 Power Strip Tower, illustrating the ease of controlling power to connected devices.

Image: The Emerson EAP-1001 Power Strip Tower in use, with various devices such as a laptop, phone, and other electronics plugged into its AC outlets and USB ports, demonstrating its multi-device charging capability.

Maintenance

• Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: When not in use for extended periods, unplug the power strip and store it in a cool, dry place away from direct sunlight.
• Cord Care: Do not bend, crimp, or pull the power cord excessively. Avoid placing heavy objects on the cord.

Troubleshooting

Specifications

Image: The Emerson EAP-1001 Power Strip Tower with its key dimensions (height, width, depth) and weight clearly labeled, providing a visual representation of its physical specifications.

Warranty and Support

This Emerson EAP-1001 Power Strip Tower comes with a 1 Year Parts, 90 Days Labor warranty.

For technical support or warranty claims, please contact the manufacturer, Naxa Electronics, Inc. Refer to the product packaging or the official Emerson website for the most current contact information.

For additional information or frequently asked questions, please visit the Emerson Store on Amazon.