HyperX Pulsefire Haste 2 Mini Wireless Gaming Mouse Instruction Manual

1. Introduction

The HyperX Pulsefire Haste 2 Mini Wireless Gaming Mouse is designed for users seeking a compact, ultra-lightweight mouse with advanced wireless capabilities and high-performance components. It is 16% smaller than the standard Pulsefire Haste 2 Wireless model, making it suitable for users with smaller hands or those who prefer a more agile device. This mouse offers dual-mode wireless connectivity via 2.4GHz and Bluetooth, a high-precision HyperX 26K Sensor, durable HyperX Switches, and customizable RGB lighting and button functions through HyperX NGENUITY Software.

Figure 1: HyperX Pulsefire Haste 2 Mini Wireless Gaming Mouse

2. What's in the Box

• HyperX Pulsefire Haste 2 Mini Wireless Gaming Mouse
• USB Wireless Dongle (2.4GHz)
• USB-C to USB-A Cable
• Skates and Grip Tape
• Quick Start Guide / Product Notices

3. Setup

3.1 Initial Charging

Before first use, it is recommended to fully charge the mouse. Connect the included USB-C to USB-A cable to the mouse and a powered USB port on your computer. The mouse can be used in wired mode while charging.

3.2 Wireless Connectivity

The Pulsefire Haste 2 Mini offers two wireless connection modes:

• 2.4GHz Wireless: Insert the USB wireless dongle into an available USB port on your computer. Slide the switch on the underside of the mouse to the '2.4G' position. The mouse should connect automatically.
• Bluetooth: Slide the switch on the underside of the mouse to the 'BT' position. On your computer or device, navigate to Bluetooth settings and select the HyperX Pulsefire Haste 2 Mini to pair.

Figure 2: Connectivity Switch on Mouse Underside

3.3 Software Installation

For full customization of DPI settings, programmable buttons, and RGB lighting, download and install the HyperX NGENUITY Software from the official HyperX website.

Video 1: Official HyperX overview of the Haste 2 Mini Wireless mouse, demonstrating its features and compact design.

4. Operating Instructions

4.1 DPI Settings

The mouse features a dedicated DPI button, typically located below the scroll wheel, to cycle through preset DPI levels. These levels can be customized and fine-tuned using the HyperX NGENUITY Software to match your preference and gaming style.

Figure 3: HyperX 26K Sensor for Precision DPI Settings

4.2 Programmable Buttons

The HyperX Pulsefire Haste 2 Mini is equipped with 6 programmable buttons. Utilize the HyperX NGENUITY Software to assign custom macros, keybinds, or functions to these buttons for enhanced control and efficiency in various applications and games.

Figure 4: Custom HyperX Switches

4.3 RGB Lighting

Personalize the RGB lighting effects and colors of your mouse using the HyperX NGENUITY Software. Choose from various effects and adjust brightness to match your setup.

4.4 Grip Tape Application

The included grip tape can be applied to the sides and main buttons of the mouse to provide additional grip and control, especially during intense gaming sessions. Ensure the mouse surface is clean and dry before applying.

Figure 5: Mouse with Grip Tape Applied

5. Battery and Charging

The HyperX Pulsefire Haste 2 Mini offers an impressive battery life of up to 100 hours on a single charge. When the battery level is low, connect the mouse using the provided USB-C to USB-A cable to recharge. The mouse can be used continuously while charging, functioning as a wired mouse.

Figure 6: Up to 100 Hours of Battery Life

6. Maintenance

To ensure the longevity and optimal performance of your HyperX Pulsefire Haste 2 Mini, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the mouse. For the sensor, use a cotton swab lightly dampened with isopropyl alcohol, ensuring no liquid enters the mouse.
• Storage: Store the mouse in a cool, dry environment away from direct sunlight and extreme temperatures.
• Avoid Liquids: Do not expose the mouse to liquids or excessive moisture.

7. Troubleshooting

If you encounter issues with your HyperX Pulsefire Haste 2 Mini, refer to the following common troubleshooting steps:

• Mouse Not Responding: Ensure the mouse is charged. Check the connectivity switch on the underside of the mouse to confirm it is in the correct position (2.4G or BT) for your desired connection.
• 2.4GHz Connection Issues: Ensure the USB wireless dongle is securely inserted into a working USB port. Try a different USB port. Re-pair the dongle if necessary (refer to the HyperX NGENUITY software for pairing instructions).
• Bluetooth Connection Issues: Ensure Bluetooth is enabled on your device. Remove the mouse from your device's paired Bluetooth devices list and attempt to re-pair it.
• Inconsistent Tracking: Clean the optical sensor on the underside of the mouse. Ensure your mousepad or surface is clean and free of debris. Adjust DPI settings via the mouse button or NGENUITY software.
• Software Not Detecting Mouse: Ensure the HyperX NGENUITY software is up to date. Restart the software and/or your computer. Ensure the mouse is connected via 2.4GHz wireless or wired mode for optimal software detection.

8. Specifications

9. Warranty and Support

For detailed warranty information, please refer to the official HyperX website or the warranty documentation included with your product. For technical support, frequently asked questions, or additional resources, visit the HyperX support page at www.hyperx.com/support.