VRURC T2055

VRURC Power Bank User Manual

Model: T2055 | Brand: VRURC

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your VRURC T2055 20000mAh Portable Power Bank. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

VRURC T2055 Power Bank held in a hand, showing its compact size and LED display.

Figure 1.1: VRURC T2055 Power Bank in hand, highlighting its portable design.

2. Package Contents

Upon opening the package, please verify that all items listed below are present and in good condition:

  • 1 x VRURC T2055 20000mAh Power Bank
  • 1 x USB A-C Charging Cable
  • 1 x User Manual (this document)

3. Product Features

The VRURC T2055 Power Bank is designed for efficient and versatile charging, offering the following key features:

  • High Capacity: 20,000mAh battery capacity for extended power.
  • Fast Charging: Equipped with 22.5W USB-A and 20W USB-C ports supporting PD QC 3.0 technology for rapid device charging.
  • Multiple Ports: Features 4 output ports and 3 input ports (USB-C, Micro, Lightning) for broad compatibility.
  • Simultaneous Charging: Capable of charging up to 4 devices concurrently.
  • LED Digital Display: Provides a precise percentage display of the remaining battery level.
  • Compact Design: Small and lightweight for easy portability.
  • Advanced Safety: Built-in protection against overheating, overvoltage, overcharging, and short circuits.
Diagram showing the VRURC power bank fast charging a smartphone, with '22.5W Fast Charge' and 'Charge Your Phone 4X Faster' text.

Figure 3.1: High-speed charging capability of the power bank.

Close-up view of the VRURC power bank's ports, labeling 3 input options (Micro, Lightning, USB-C) and 4 output options (USB-A 12W, USB-A 22.5W, USB-C 20W, USB-A 12W).

Figure 3.2: Overview of the multiple input and output ports.

Various electronic devices like iPhones, Android phones, tablets, and smartwatches surrounding the VRURC power bank, illustrating its universal compatibility.

Figure 3.3: Universal compatibility with various devices.

4. Setup & First Use

4.1 Charging the Power Bank

Before initial use, fully charge your VRURC T2055 Power Bank. A full charge typically takes approximately 6 hours when using a 9V 2A cable and adapter (not included).

  1. Connect the provided USB A-C cable to the USB-C input port on the power bank.
  2. Connect the other end of the cable to a compatible USB wall adapter or computer USB port.
  3. The LED display will show the charging progress, indicating the battery percentage.
  4. Once the display shows 100%, the power bank is fully charged and ready for use.

The power bank supports three input methods for recharging:

  • USB-C Input (18W Max)
  • Lightning Input (18W Max)
  • Micro USB Input (18W Max)
Diagram illustrating three ways to recharge the power bank: via USB-C, Lightning, and Micro USB input ports, each showing an 18W input.

Figure 4.1: Different input options for recharging the power bank.

5. Operating Instructions

5.1 Charging Your Devices

The VRURC T2055 Power Bank can charge a wide range of devices, including smartphones, tablets, and other USB-powered gadgets.

  1. Identify the appropriate charging cable for your device.
  2. Connect one end of your device's charging cable to one of the power bank's output ports (USB-A or USB-C).
  3. Connect the other end of the cable to your device.
  4. The power bank will automatically begin charging your device. The LED display will remain active, showing the power bank's remaining charge.

The power bank features four output ports:

  • USB-A Output 1 (12W Max)
  • USB-A Output 2 (22.5W Max)
  • USB-C Output (20W Max)
  • USB-A Output 3 (12W Max)
An overhead view of a desk with a VRURC power bank connected to and simultaneously charging a laptop, a smartphone, and two tablets.

Figure 5.1: Charging up to four devices simultaneously.

6. LED Display Guide

The integrated LED digital display provides real-time information about the power bank's battery status. The percentage shown directly indicates the remaining charge level of the power bank (0-100%).

Close-up of the VRURC power bank's LED display showing '100%' battery level.

Figure 6.1: The LED display showing battery percentage.

7. Safety Information

To ensure safe operation and prevent damage to the device or injury, please adhere to the following safety guidelines:

  • Do not expose the power bank to extreme temperatures (hot or cold), direct sunlight, or high humidity.
  • Avoid dropping, hitting, or disassembling the device.
  • Keep the power bank away from water or other liquids.
  • Do not use the power bank if it is visibly damaged, swollen, or leaking.
  • Use only certified charging cables and adapters.
  • The power bank features automatic protection modes for overheating, overvoltage, overcharging, and short circuit. However, always monitor charging and disconnect once devices are fully charged.
  • Keep out of reach of children.

8. Maintenance

Proper maintenance will extend the lifespan of your power bank:

  • Clean the power bank with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Store the power bank in a cool, dry place when not in use.
  • If storing for an extended period, charge the power bank to approximately 50-70% every three months to maintain battery health.

9. Troubleshooting

If you encounter issues with your VRURC T2055 Power Bank, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Power bank not chargingCable or adapter faulty; power bank fully discharged; input port issue.Try a different charging cable and adapter. Ensure the cable is fully inserted into the input port. Allow a few minutes for the power bank to respond if completely drained.
Device not charging from power bankPower bank is empty; cable faulty; device not compatible; output port issue.Check power bank's charge level on the LED display. Try a different charging cable. Ensure your device is compatible with USB charging. Try a different output port on the power bank.
Slow chargingCable or adapter not supporting fast charge; device's charging limit.Ensure you are using a fast-charging compatible cable and adapter (for input) or cable (for output). Some devices have a maximum charging rate.
LED display not workingDevice malfunction.Try charging the power bank or connecting a device to it to see if the display activates. If it remains unresponsive, contact customer support.

10. Specifications

SpecificationDetail
Model NumberT2055
Battery Capacity20000 Milliamp Hours (mAh)
Product Dimensions4.21 x 2.74 x 0.99 inches
Item Weight10 ounces
Input PortsUSB-C (18W Max), Micro USB (18W Max), Lightning (18W Max)
Output PortsUSB-A (12W Max), USB-A (22.5W Max), USB-C (20W Max), USB-A (12W Max)
Special Features22.5W Fast Charging, Digital Display, Pocket Size, Slim Design, Multi-Port Charging
Battery TypeLithium Polymer
An image displaying the VRURC power bank's 20000mAh capacity, its dimensions (4.21 x 2.74 x 0.99 inches), weight (9.9 ounces), and the approximate number of charges it provides for various devices: 4.3 charges for iPhone 15, 2.5 charges for Samsung S23, 1.6 charges for iPad Pro, and 26 charges for AirPods Pro.

Figure 10.1: Capacity and dimensions overview.

11. Warranty and Support

For warranty information and customer support, please refer to the specific warranty card or documentation included with your product package. You may also visit the official VRURC brand store for additional support and product information:

Visit the VRURC Official Store

© 2024 VRURC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.