1. Introduction
Thank you for choosing the Eleglide Mopride 1 Plus Electric Mountain Bike. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure proper assembly, safe usage, and optimal performance.
2. Safety Information
Always prioritize safety when operating your electric bike. Failure to follow safety guidelines can result in serious injury or damage to the product.
- Always wear a helmet and appropriate safety gear.
- Obey all local traffic laws and regulations.
- Perform a pre-ride inspection before each use, checking brakes, tires, and battery.
- Do not ride under the influence of alcohol or drugs.
- Be aware of your surroundings and potential hazards.
- Avoid riding in extreme weather conditions.
3. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- 1 x Eleglide Electric Bike
- 1 x User Manual
- 1 x Charger
- 2 x Pedal
- 1 x Rear Reflector
- 4 x Spoke Reflector
- 1 x LCD Display
- 2 x Key
- 1 x Tool Kit
If any items are missing or damaged, please contact customer support immediately.
4. Setup and Assembly
Your Eleglide Mopride 1 Plus electric bike is approximately 85% pre-assembled. Follow these steps for final assembly and initial setup:
- Unpacking: Carefully remove the bike and all components from the packaging. Retain the packaging for future transport or returns.
- Handlebar Installation: Attach the handlebar to the stem, ensuring it is centered and tightened securely.
- Front Wheel Installation: Install the front wheel, aligning the disc brake rotor with the caliper. Ensure the quick-release skewer or axle nuts are properly tightened.
- Pedal Installation: Identify the left (L) and right (R) pedals. Thread the pedals into the crank arms (left pedal is reverse-threaded) and tighten firmly with a wrench.
- Seat Post Adjustment: Insert the seat post into the frame and adjust the saddle height for a comfortable and safe riding position. Secure the quick-release clamp.
- Battery Charging: Before first use, fully charge the 12.5Ah removable battery. Connect the charger to the battery and a power outlet. The indicator light on the charger will change when charging is complete.
- Initial Checks: Verify that all bolts and quick releases are tightened, brakes are functioning correctly, and tires are inflated to the recommended pressure.
5. Operating Instructions
Familiarize yourself with the bike's controls and features before riding.
5.1 Powering On/Off
To power on the bike, press and hold the power button on the LCD display. To power off, press and hold the power button again.
5.2 LCD Display and Controls
The intelligent LCD display provides real-time information and allows control over various functions:
- Battery Level: Indicates remaining battery charge.
- Speed: Displays current riding speed.
- Trip Distance: Shows distance covered during the current ride.
- Assist Level: Indicates the current pedal assist level (1-5).
- Light Mark: Indicates headlight status.
- Walk Mode: Activates a low-speed assist for walking the bike.
- Malfunction Indicator: Alerts to system errors.
Use the '+' and '-' buttons on the display to adjust pedal assist levels and navigate settings.
5.3 Riding Modes and Pedal Assist
The Eleglide M1 Plus offers two primary riding modes:
- Bike Mode: Operates as a traditional bicycle, relying solely on pedal power.
- Electric-Assist Mode: Provides motor assistance while pedaling. There are 5 levels of pedal assist, allowing you to customize the amount of motor support based on terrain and desired effort.
To change assist levels, use the '+' and '-' buttons on the LCD display. Higher levels provide more assistance and speed, while lower levels conserve battery life.
5.4 Gear Shifting
The bike is equipped with a 21-speed transmission system. Use the shifters on the handlebars to change gears, adapting to different inclines and speeds. Shift smoothly to avoid strain on the drivetrain.
5.5 Braking System
The Eleglide M1 Plus features dual disc brakes (front and rear) for reliable stopping power. Apply both brakes simultaneously for effective and controlled deceleration. The brakes also incorporate a power-off design, cutting motor assistance when applied.
5.6 App Control
Enhance your riding experience by connecting to the Eleglide app (available for iOS 11.0+ and Android 5.0+). The app allows you to:
- Turn the headlight on/off.
- Shift assist levels.
- Lock/unlock the bike.
- Set a password.
- Adjust screen brightness.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your electric bike.
6.1 Battery Care
- Charge the battery regularly, even if not in use, to maintain its health.
- Avoid fully discharging the battery.
- Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
- Use only the official Eleglide charger.
6.2 Tire Pressure
Check tire pressure before each ride. Maintain the recommended PSI (pounds per square inch) as indicated on the tire sidewall for optimal performance and safety.
6.3 Brake Inspection
Regularly inspect brake pads for wear and ensure brake levers provide firm and responsive braking. Adjust or replace components as needed.
6.4 General Cleaning
Clean your bike regularly with a damp cloth. Avoid using high-pressure washers directly on electrical components. Lubricate the chain periodically to ensure smooth operation.
7. Troubleshooting
This section addresses common issues you might encounter with your Eleglide Mopride 1 Plus electric bike.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Battery not charged or not properly seated. Loose electrical connection. | Ensure battery is fully charged and securely inserted. Check all visible cable connections. |
| Motor not assisting | Low battery. Pedal assist level set to 0. Brake levers engaged. Malfunction. | Charge battery. Increase pedal assist level. Release brake levers. Check LCD for error codes. |
| Brakes feel weak or noisy | Worn brake pads. Misaligned caliper. Contaminated rotor. | Inspect and replace brake pads if worn. Realign brake caliper. Clean rotor with disc brake cleaner. |
| Gears are not shifting smoothly | Derailleur misalignment. Dirty or dry chain. Damaged cable. | Clean and lubricate chain. Adjust derailleur. If issues persist, consult a bike mechanic. |
For persistent issues or complex repairs, it is recommended to contact Eleglide customer support or a certified bicycle technician.
8. Specifications
Key technical specifications for the Eleglide Mopride 1 Plus Electric Mountain Bike:
| Feature | Specification |
|---|---|
| Model | M2 |
| Bike Type | Electric Bike, Mountain Bike |
| Wheel Size | 27.5 Inches |
| Frame Material | Aluminum |
| Motor Wattage | 250 watts |
| Battery | 36V 12.5Ah Lithium Ion (Removable) |
| Max Range (Assist Mode) | Up to 100 KM (62 Miles) |
| Number of Speeds | 21 |
| Brake Type | Front & Rear Disc Brakes + Power-off Design |
| Suspension | Front (with lockout) |
| Weight | 21.7 Kilograms |
| Product Dimensions | 179 x 68 x 104.1 cm |
9. Warranty and Support
Eleglide products are designed for quality and durability. For detailed warranty information, including coverage periods and terms, please refer to the warranty card included with your product or visit the official Eleglide website.
If you have any questions, require technical assistance, or need spare parts, please do not hesitate to contact Eleglide customer support. Contact details can typically be found on the Eleglide website or in your purchase documentation.
When contacting support, please have your product model (M2) and purchase date ready to expedite the process.
