EUGAD Bar Stools User Manual

Introduction

Thank you for choosing EUGAD Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Designed for comfort and stability, these stools feature a high-resilience velvet upholstery and a robust metal frame, making them suitable for various settings such as bars, kitchen islands, and bistros. Please read this manual thoroughly before assembly and retain it for future reference.

Safety Information

To ensure your safety and prolong the life of your EUGAD Bar Stools, please adhere to the following guidelines:

• Maximum Load Capacity: Do not exceed the recommended maximum load of 150 kg (approximately 330 lbs) per stool. Overloading can lead to instability and damage.
• Assembly Required: Proper assembly is crucial for the stability and safety of the product. Ensure all components are correctly installed and tightened according to the instructions.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Stable Surface: Always place the bar stools on a flat, stable, and level surface to prevent tipping.
• Avoid Standing: Do not stand on the bar stools. They are designed for seating only.
• Children and Pets: Keep children and pets away from the product during assembly.
• Cleaning: Use only recommended cleaning agents and methods to avoid damaging the velvet fabric or metal frame.

Package Contents

Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

• Seat (with velvet upholstery and backrest)
• Legs (4 per stool, metal)
• Footrest bars (2 per stool, metal)
• Assembly hardware (screws, washers, Allen key)
• Anti-slip foot pads
• Instruction Manual (this document)

Figure 1: Exploded view of bar stool components.

Setup and Assembly

Assembly of the EUGAD Bar Stools is designed to be straightforward. Follow these steps carefully:

1. Prepare the Area: Clear a spacious, clean, and soft area to prevent scratching the stool components or your floor during assembly.
2. Attach Legs to Seat: Carefully align the top ends of the four legs with the pre-drilled holes on the underside of the seat. Secure them using the provided screws and washers. Do not fully tighten the screws at this stage.
   

   Figure 2: Attaching the legs to the seat base.

3. Install Footrest Bars: Connect the two footrest bars between the legs. Ensure they are correctly oriented to form a stable square or rectangular base. Use the remaining screws to secure them. Again, do not fully tighten yet.
   

   Figure 3: Securing the footrest bars.

4. Tighten All Screws: Once all components are loosely assembled, place the stool upright on a flat surface. Apply gentle pressure to ensure it is level, then systematically tighten all screws using the provided Allen key. Ensure all connections are firm and secure.
5. Attach Anti-slip Pads: Press the anti-slip foot pads onto the bottom of each leg. These pads protect your floor and reduce noise.
   

   Figure 4: Anti-slip foot pad detail.

6. Final Check: Gently rock the stool to ensure it is stable and does not wobble. If it wobbles, re-check all connections and retighten as needed.

Usage

The EUGAD Bar Stools are designed for versatile use and comfort:

• Ergonomic Design: The curved backrest and seat are shaped to conform to the natural curves of your back and hips, providing comfortable support for extended periods.
• Footrest: Utilize the integrated footrest to relax your legs and maintain a comfortable posture.
• Versatile Placement: These stools are ideal for kitchen islands, home bars, dining areas, bistros, or any counter-height surface.

Figure 5: Bar stools in a kitchen setting.

Figure 6: Front view of the EUGAD Bar Stools.

Maintenance

Proper care will help maintain the appearance and longevity of your bar stools:

• Cleaning Velvet: For light dust, use a soft brush or vacuum cleaner with an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Do not rub vigorously.
• Cleaning Metal Frame: Wipe the metal legs and footrest with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Dry thoroughly to prevent rust.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the velvet fabric to fade.
• Heat and Moisture: Keep the stools away from direct heat sources and excessive moisture.
• Regular Inspection: Periodically inspect all connections and retighten screws as needed to ensure continued stability.

Troubleshooting

If you encounter any issues with your EUGAD Bar Stools, refer to the following common problems and solutions:

Specifications

Key specifications for the EUGAD Bar Stools (Model: 1068BY-2):

• Brand: EUGAD
• Model Number: 1068BY-2
• Color: Black
• Material: Velvet (upholstery), Metal (frame)
• Overall Dimensions (L x W x H): 43.5 x 48.5 x 90 cm (approximately 17.1 x 19.1 x 35.4 inches)
• Seat Height: 67 cm (approximately 26.4 inches)
• Seat Width: 48.5 cm (approximately 19.1 inches)
• Product Weight: 13.82 kg (approximately 30.47 lbs) per pair
• Maximum Load Capacity: 150 kg (approximately 330 lbs)
• Assembly Required: Yes
• Number of Pieces: 2 (per set)

Figure 7: Product dimensions and load capacity.

Warranty and Support

EUGAD is committed to providing high-quality products. For specific warranty details, please refer to the documentation included with your purchase or visit the official EUGAD website. If you require assistance with assembly, missing parts, or have any questions regarding your bar stools, please contact EUGAD customer support directly. Contact information can typically be found on the packaging or the brand's official online store.

Thank you for choosing EUGAD.