VONLUCE HCF1013GF
VONLUCE Semi Flush Mount Ceiling Light
Model: HCF1013GF
Instruction Manual
1. Product Overview
The VONLUCE Semi Flush Mount Ceiling Light is designed to provide elegant and ambient illumination for various indoor spaces. Featuring a captivating flower-shaped fabric shade and an antique brass canopy, this fixture adds a timeless charm suitable for contemporary minimalist to Art Deco interior styles. It supports three E26 base bulbs (not included) and is dimmer compatible, allowing for precise control over brightness. Its gentle light diffusion makes it ideal for bedrooms, living rooms, dining rooms, kitchen islands, or hallways.

Figure 1: VONLUCE Semi Flush Mount Ceiling Light.

Figure 2: The ceiling light fixture installed in a kid's room, bedroom, hallway, and living room, demonstrating its versatility.
2. Safety Information
Please read and understand all instructions before beginning installation and use. Failure to follow these instructions may result in electric shock, fire, or other injuries that could be hazardous or even fatal.
- WARNING: To avoid electric shock, ensure power is turned OFF at the circuit breaker or fuse box before installation, maintenance, or bulb replacement.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not exceed the maximum wattage specified for the light bulbs (60W per bulb).
- This fixture is designed for indoor use only. Do not expose to water or moisture.
- Handle the fabric shade and glass components with care to prevent damage.
- Keep packaging materials away from children.
3. Package Contents
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact customer service for assistance.
- VONLUCE Semi Flush Mount Ceiling Light Fixture (1)
- Mounting Hardware (1 set)
- Instruction Manual (1)
Note: Light bulbs are NOT included and must be purchased separately. The fixture requires three E26 base bulbs.
4. Setup & Installation
Installation of this ceiling light fixture is designed to be straightforward. However, if you are unsure about any steps, it is recommended to consult a qualified electrician.
Before You Begin:
- Turn off Power: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the main power switch. Verify the power is off by attempting to turn on the light switch for the fixture.
- Gather Tools: You will need a screwdriver, wire strippers, electrical tape, and possibly a ladder.
- Inspect Components: Ensure all components are present and undamaged.

Figure 3: Key components of the light fixture.
Installation Steps:
- Attach Mounting Bracket: Secure the mounting bracket (included in hardware) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
- Connect Wires: Carefully connect the electrical wires from the fixture to the corresponding wires from the junction box.
- Connect the black wire (live) from the fixture to the black wire (live) from the junction box.
- Connect the white wire (neutral) from the fixture to the white wire (neutral) from the junction box.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box.
- Mount Fixture: Carefully push the wired connections into the junction box. Align the fixture's canopy with the mounting bracket and secure it with the decorative nuts or screws provided.
- Install Bulbs: Screw three E26 base light bulbs (not included) into the sockets. Ensure bulbs do not exceed 60W each.
- Attach Shade: Carefully place the fabric shade onto the fixture and secure it according to the specific design (usually by screwing a finial or ring at the bottom).
- Restore Power: Once installation is complete and all components are securely in place, turn the power back on at the circuit breaker.
5. Operating Instructions
The VONLUCE Semi Flush Mount Ceiling Light is operated via a standard wall switch. For dimming functionality, ensure you use dimmable bulbs and a compatible dimmer switch (not included).
- Turning On/Off: Flip the wall switch connected to the fixture to turn the light on or off.
- Dimming: If using dimmable bulbs and a compatible dimmer switch, adjust the dimmer switch to control the light intensity.
- Bulb Compatibility: This fixture is compatible with CFL, LED, or incandescent light bulbs with an E26 base, rated up to 60W per bulb.

Figure 4: Light fixture in ON and OFF states.

Figure 5: Fixture dimensions and compatible bulb types.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your light fixture.
- Cleaning: Before cleaning, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to wipe down the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or fabric. For the fabric shade, a light dusting or gentle vacuuming with a brush attachment is recommended.
- Bulb Replacement: Always turn off the power before replacing bulbs. Allow bulbs to cool completely before handling. Unscrew old bulbs and screw in new E26 base bulbs, ensuring they do not exceed the maximum 60W wattage.
7. Troubleshooting
If you encounter issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims unexpectedly. |
|
|
| Light appears dull or yellow. |
|
|
If the problem persists after trying these solutions, please contact VONLUCE customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | VONLUCE |
| Model Name | Ceiling Light Fixture |
| Item Model Number | HCF1013GF |
| Color | Gold (Fixture), White (Shade) |
| Material | Metal, Fabric |
| Style | Modern |
| Light Fixture Form | Close to Ceiling / Semi Flush Mount |
| Product Dimensions (L x W x H) | 13"L x 13"W x 6"H (approx. 12.6'' diameter) |
| Item Weight | 3.01 pounds |
| Power Source | AC |
| Voltage | 110 Volts |
| Number of Light Sources | 3 |
| Bulb Base | E26 |
| Max Wattage per Bulb | 60 watts |
| Light Source Type | LED, Incandescent, or CFL (not included) |
| Special Feature | Anti-Rust, Dimmable (with compatible bulbs/switch) |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | No (refers to main fixture assembly, installation is required) |
9. Warranty and Support
For warranty information regarding your VONLUCE Semi Flush Mount Ceiling Light, please refer to the documentation provided with your purchase or visit the official VONLUCE website. Standard warranty terms typically cover manufacturing defects.
If you require technical assistance, have questions about installation, or need to report a missing/damaged part, please contact VONLUCE customer support directly. Contact details can usually be found on the product packaging or the official brand website.
VONLUCE Official Store: Visit VONLUCE Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.