1. Introduction
Thank you for choosing the TESSAN 7-in-1 Power Strip. This device is designed to provide convenient power distribution and charging for multiple electronic devices simultaneously. It features four AC outlets, two USB-A ports, and one USB-C port, along with a 2-meter extension cord and an integrated on/off switch for enhanced control and energy saving.
2. Product Features
- 7-in-1 Design: Equipped with 4 AC outlets, 2 USB-A ports, and 1 USB-C port, allowing up to 7 devices to be powered or charged simultaneously.
- Optimal Outlet Spacing: Designed with ample space between AC outlets to accommodate larger power adapters without blocking adjacent ports.
- 2-Meter Extension Cord: Provides flexibility and extended reach for use in various environments such as home, office, or school.
- Integrated On/Off Switch: A single switch controls power to all connected devices, enabling easy power management and energy conservation.
- Wall-Mountable Design: Features mounting holes and rubber feet for secure installation on walls or under desks, optimizing space.
- Efficient USB Charging: Includes one USB-C port (15W Max) and two USB-A ports (12W Max) for direct charging of compatible devices without needing additional adapters.







3. Setup Instructions
- Unpack: Carefully remove the power strip from its packaging.
- Placement: Position the power strip on a stable, dry surface, away from water or heat sources. Ensure the 2-meter cord can reach your wall outlet without being stretched or obstructed.
- Optional Wall Mounting: If desired, use the two mounting holes on the back of the power strip to secure it to a wall or under a desk using appropriate screws (not included). Ensure it is firmly attached.
- Connect to Power: Plug the power strip's main plug into a grounded wall outlet.
4. Operating Instructions
- Power On/Off: Press the integrated on/off switch to turn the power strip on or off. When the switch is illuminated, the power strip is active.
- Using AC Outlets: Plug your devices (e.g., laptops, lamps, small appliances) into the 4 AC outlets. Ensure the total power consumption does not exceed 3600W (2500W for continuous use).
- Using USB-A Ports: Connect your USB-A compatible devices (e.g., smartphones, tablets, smartwatches) to the two USB-A ports for charging. Each port provides up to 12W (5V/2.4A).
- Using USB-C Port: Connect your USB-C compatible devices to the USB-C port for charging. This port provides up to 15W (5V/3A).
- Simultaneous Use: You can use all 7 ports (4 AC, 2 USB-A, 1 USB-C) simultaneously, provided the total power draw remains within the specified limits.
5. Specifications
| Feature | Specification |
|---|---|
| Model Number | TS-307-C |
| AC Outlets | 4 |
| USB-A Ports | 2 (5V/2.4A Max per port, 12W Max) |
| USB-C Port | 1 (5V/3A Max, 15W Max) |
| Total USB Output | 15W (Max) |
| Rated Power | 3600W (Max) |
| Rated Current | 15A |
| Voltage | 240V |
| Cable Length | 2 Meters |
| Dimensions (L x W) | 27.7 x 5.8 cm |
| Material | Plastic, Metal |
| Plug Type | Type E (2-pin France), Type F |
6. Safety Information
Please read and follow these safety guidelines to prevent injury or damage:
- Do not exceed the maximum load of 3600W (2500W for continuous use). Overloading can cause overheating and fire.
- This power strip is designed for indoor use only. Do not use it in wet or damp conditions.
- Do not disassemble or modify the power strip. Refer all servicing to qualified personnel.
- Keep out of reach of children and pets.
- Do not plug one power strip into another.
- Ensure the plug is fully inserted into the wall outlet. A loose connection can cause overheating.
- Avoid placing the power strip near heat sources or in direct sunlight.
- If the power strip becomes damaged, stop using it immediately and disconnect it from the power source.
7. Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, store the power strip in a cool, dry place, away from direct sunlight and moisture.
- Inspection: Periodically inspect the power cord and the power strip for any signs of damage, such as frayed wires or cracked casing.
8. Troubleshooting
- No Power to Devices:
- Ensure the power strip's main plug is securely inserted into a working wall outlet.
- Check if the on/off switch is pressed to the 'ON' position (illuminated).
- Verify that the connected devices are properly plugged into the power strip and are switched on.
- Check the wall outlet by plugging in another known working device.
- USB Ports Not Charging:
- Ensure the power strip is receiving power and the on/off switch is on.
- Check the USB cable for damage and ensure it is securely connected to both the power strip and your device.
- Verify that your device is compatible with the USB charging specifications (5V/2.4A for USB-A, 5V/3A for USB-C).
- Try a different USB port or cable.
- Overheating:
- Immediately disconnect all devices and unplug the power strip from the wall.
- Check if the total power consumption of connected devices exceeds the maximum rated power (3600W). Reduce the load if necessary.
- Ensure adequate ventilation around the power strip.
9. Warranty and Support
TESSAN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or contact TESSAN customer service through their official website or the retailer where the product was purchased. Please have your model number (TS-307-C) and purchase details ready when contacting support.