SHEHDS IP65 Waterproof 380W 19R Moving Head Stage Light Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation of your SHEHDS IP65 Waterproof 380W 19R Moving Head Stage Light. Please read these instructions thoroughly before installation and use. Proper installation and operation are crucial for optimal performance and user safety.

The SHEHDS 380W 19R Moving Head Stage Light is designed for various lighting applications, featuring an IP65 waterproof rating, a powerful 380W 19R bulb, and a range of effects including 14 colors, 17 static gobos, and dual prisms. It supports multiple operational modes including DMX512, Auto, Sound Control, Stand Alone, and Master/Slave.

What's in the Box

Verify that all components are present and in good condition upon unpacking.

• 1x 380W IP65 waterproof moving head light
• 1x Powercon Cable (1.2m)
• 1x Signal Cable (1.2m)
• 1x 70cm Safety Rope
• 1x User Manual

Image: Contents of the product packaging, including the stage light, power cable, signal cable, safety rope, and user manual.

Setup

Physical Installation

The moving head light can be mounted in various positions (e.g., truss, floor). Ensure the mounting surface or structure can safely support the weight of the fixture (approximately 59.9 pounds).

• Use the provided quick-release attachments for secure mounting to compatible clamps or stands.
• Always use the safety rope to secure the fixture to a secondary support point.

Image: The SHEHDS 380W IP65 Moving Head Light shown mounted on a truss using quick-release clamps.

Power Connection

Connect the provided Powercon cable to the 'POWER IN' port on the fixture. The fixture also includes a 'POWER OUT' port for daisy-chaining power to other compatible units.

DMX Connection

For DMX control, connect a DMX cable from your DMX controller to the 'DMX IN' port on the fixture. Use the 'DMX OUT' port to daisy-chain DMX signal to additional fixtures.

Operating Instructions

The SHEHDS Moving Head Light offers various operational modes and effects.

Control Panel

The fixture features an LCD display and control buttons for mode selection and parameter adjustment. After setting the DMX address, it will be retained even after power cycling.

Operational Modes

• DMX512: Allows for precise control over all functions using a DMX controller. The fixture supports 19 DMX channels.
• Auto: Pre-programmed light shows run automatically.
• Sound Control: The light reacts to ambient sound or music.
• Stand Alone: Operates independently using internal programs.
• Master/Slave: Multiple fixtures can be synchronized, with one acting as the master and others as slaves.

Light Effects

• Colors: 14 colors + white, with a 6-color rainbow wheel for varied color displays.
• Gobos: 17 static gobos for pattern projection.
• Prisms: Features one rotatable 8-facet circular prism and one 24-facet prism, both independently rotating with variable speed.
• Frost: Fast change frosts (9.5° angle) for softening gobo or beam edges.
• Strobe: Dual strobe structure with adjustable speed from 0.5-14 times/second.
• Dimmer: 0-100% mechanical dimmer for smooth light intensity control.

Image: Illustration of the 14 fixed dichroic colors and 17 static gobos available in the light fixture.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your moving head light.

• Cleaning: Periodically clean the lenses and exterior with a soft, lint-free cloth. Avoid abrasive cleaners.
• Inspection: Regularly check all cables, connections, and mounting hardware for any signs of wear or damage.
• Ventilation: Ensure proper ventilation around the fixture to prevent overheating. Do not block air vents.

Troubleshooting

If you encounter issues with your moving head light, refer to the following common troubleshooting steps:

• No Power: Check the power cable connection, the power outlet, and the on/off switch on the fixture.
• No DMX Control: Verify DMX cable connections, DMX address settings on the fixture, and the DMX controller's output.
• Fixture Not Responding: Ensure the fixture is not in a paused or blackout mode. Try resetting the fixture by power cycling.
• Abnormal Movement/Noise: Check for any obstructions to the moving head. If the issue persists, contact customer support.

Specifications

Image: Detailed dimensions and weight information for the SHEHDS 380W IP65 Moving Head Light.

Warranty & Support

SHEHDS provides a 1-year warranty for this product. For customer service and technical support, please refer to the contact information provided in your product packaging or visit the official SHEHDS store.

A 1-month replacement policy is also available for eligible issues.