LIORQUE Projection Alarm Clock User Manual

Introduction

Thank you for choosing the LIORQUE Projection Alarm Clock. This device combines a digital alarm clock with a ceiling projection feature, FM radio, and convenient USB charging ports. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.

Figure 1: LIORQUE Projection Alarm Clock with time projected.

Key Features:

• Projection Clock: Projects time onto the ceiling or wall with 180° adjustable direction and brightness.
• FM Radio: 87.5-108MHz with 15 volume levels, 10 station presets, and an auto-off function.
• Dual Alarm: Set two independent alarms with snooze functionality (5-60 minutes).
• Large LED Display: Clear digital viewing with infinite brightness adjustment (0-100%).
• Dual USB Charging Ports: Conveniently charge two devices simultaneously (5V1A).

Setup

1. Power Connection

Connect the provided power adapter to the DC 5V port on the back of the alarm clock and plug it into a standard wall outlet. The clock will power on and the display will illuminate.

Figure 2: Power adapter connected to the alarm clock.

2. Battery Backup

The alarm clock includes a built-in CR2032 button battery. This battery serves as a backup to retain time and alarm settings during a power outage, preventing the need to reset the clock after power interruptions.

Operating Instructions

1. Time Setting

1. Press and hold the TIME SET button to enter time setting mode. The hour digits will flash.
2. Use the HOUR and MIN buttons to adjust the hour and minute respectively.
3. Press TIME SET again to confirm and exit.
4. To switch between 12-hour and 24-hour format, press the 12/24H button.

2. Alarm Setting

The clock supports two independent alarms (Alarm 1 and Alarm 2).

Figure 3: Setting up dual alarms on the clock.

1. Press and hold the ALARM 1 or ALARM 2 button to enter alarm setting mode. The alarm hour digits will flash.
2. Use the HOUR and MIN buttons to set the desired alarm time.
3. Press the respective ALARM button again to confirm the time.
4. To activate/deactivate an alarm, short press the ALARM 1 or ALARM 2 button. An alarm icon will appear/disappear on the display.
5. Snooze Function: When the alarm sounds, press the SNOOZE/OK/+ button to activate snooze. The alarm will pause for 5 minutes. The snooze duration can be adjusted from 5 to 60 minutes by pressing and holding the SNOOZE/OK/+ button during normal time display and then using the HOUR or MIN buttons.

Figure 4: Snooze function with adjustable duration.

3. Projection Features

The projection feature allows you to view the time on your ceiling or wall.

Figure 5: Projection of time with various adjustment options.

• Activate/Deactivate: Press the PROJECTION ON/FLIP/OFF button to turn the projection on or off.
• Adjust Projection Angle: Rotate the projection arm 180° to direct the time display as desired.
• Adjust Projection Brightness: Short press the PROJECTION ON/FLIP/OFF button to cycle through brightness levels (Off-Low-High).
• Invert Projection: Long press the PROJECTION ON/FLIP/OFF button to flip the projected image 180° for optimal viewing orientation.

4. Display Brightness Adjustment

The main LED display brightness can be adjusted to your preference.

• Press the DIMMER button to cycle through the brightness levels (0-100%).
• The infinite brightness adjustment allows you to find the most comfortable level for your environment.

5. FM Radio Operation

Enjoy your favorite radio stations with the built-in FM radio.

Figure 6: FM Radio controls and features.

• Turn On/Off: Short press the RADIO ON/OFF button.
• Auto-Scan & Save Stations: Long press the RADIO ON/OFF button to automatically search and save up to 10 FM radio stations.
• Manual Tuning: Use the PREV and NEXT buttons to manually tune to desired frequencies.
• Volume Adjustment: Use the VOL buttons to adjust the radio volume (15 levels).
• Sleep Timer: Press the SLEEP TIMER button to set the radio to automatically turn off after a set duration (5-90 minutes).
• Alarm to Radio: You can set one of your alarms to wake you up to your favorite FM radio station.

6. USB Charging Ports

The clock is equipped with two USB charging ports for your convenience.

Figure 7: Dual USB charging ports for external devices.

• Connect your devices (e.g., smartphone, tablet) to the USB-A ports on the back of the clock using their respective charging cables.
• The ports provide 5V1A charging power, suitable for overnight charging without damaging device batteries.

Maintenance

To ensure the longevity and optimal performance of your LIORQUE Projection Alarm Clock, please follow these simple maintenance guidelines:

• Wipe the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Keep the clock away from direct sunlight, extreme temperatures, and high humidity.
• Ensure the projection lens is clean for clear time display. Gently wipe with a lens cloth if needed.

Troubleshooting

Specifications

Warranty and Support

LIORQUE products are designed for reliability and performance. For any questions, technical support, or warranty inquiries regarding your Projection Alarm Clock, please contact our customer service team.

Please refer to the product packaging or our official website for the most up-to-date warranty information and contact details.