Perlegear Universal Swivel TV Stand User Manual

1. Introduction

Thank you for choosing the Perlegear Universal Swivel TV Stand. This stand is designed to provide a stable, height-adjustable, and swiveling solution for your television, enhancing your viewing experience. Please read this manual carefully before assembly and use to ensure safe and proper installation.

Figure 1.1: Perlegear Universal Swivel TV Stand

2. Important Safety Information

WARNING: Failure to read and follow all instructions can result in personal injury or damage to the product. Keep this manual for future reference.

• Do not exceed the maximum weight capacity of 45kg (99 lbs).
• Ensure your TV's VESA pattern is compatible (100x100mm to 400x400mm).
• Do not use this product for any purpose not explicitly specified by the manufacturer.
• If you have any doubts about the installation, contact a qualified professional.
• Always ensure the stand is placed on a stable, level surface.
• Keep children and pets away from the assembly area.
• Check all connections periodically to ensure they remain secure.

3. Package Contents

Verify that all components are present and undamaged. If any parts are missing or defective, please contact Perlegear customer service.

Figure 3.1: Included Mounting Hardware and Components

Parts List:

• Tempered Glass Base
• Main Support Pillar
• TV Mounting Plate
• TV Brackets (2)
• Various Screws, Washers, and Spacers for TV attachment
• Assembly Hardware (bolts, nuts, Allen key, Phillips screwdriver)
• Cable Clips (2)
• Instruction Manual

4. Compatibility

This TV stand is designed for wide compatibility. Please ensure your TV meets the following criteria:

• TV Size: Compatible with most 24-inch to 60-inch televisions.
• Weight Capacity: Supports TVs up to 45 kg (99 lbs).
• VESA Mounting Patterns: Supports VESA patterns from 100x100mm to 400x400mm. Common compatible patterns include:
  • 100x100mm, 100x200mm
  • 200x100mm, 200x200mm, 200x300mm
  • 300x200mm, 300x300mm
  • 400x200mm, 400x300mm, 400x400mm

Figure 4.1: TV Size and VESA Compatibility Chart

Figure 4.2: Understanding VESA Mounting Patterns

5. Setup Instructions

Follow these steps carefully for a hassle-free assembly. It is recommended to have a second person assist during certain steps, especially when mounting the TV.

Step 5.1: Assemble the Base and Pillar

1. Carefully unbox all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the main support pillar to the tempered glass base using the provided bolts and Allen key. Ensure the pillar is securely fastened and aligned.
3. Apply the anti-slip pads to the bottom corners of the tempered glass base to maximize stability and protect your furniture surface.

Figure 5.1: Anti-Slip Pads on Base

Step 5.2: Attach TV Brackets to Your TV

1. Identify the VESA mounting holes on the back of your TV.
2. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's mounting holes.
3. Attach the two TV brackets to the back of your TV, aligning them with the VESA holes. Ensure they are securely tightened but do not overtighten. The brackets should be oriented so that the hooks face downwards.

Step 5.3: Mount TV to the Stand and Adjust Height

1. With assistance, carefully lift your TV and hook the attached TV brackets onto the TV mounting plate on the stand. Ensure the brackets are fully seated.
2. Secure the TV to the mounting plate using the security locks provided. This prevents the TV from accidentally sliding off.
3. Adjust the height of the TV by selecting one of the 8 available height configurations. The TV plate can be installed between 289mm and 397mm tall, with additional 50mm customization via two bracket heights.

Figure 5.2: Engaging Security Locks

Figure 5.3: Height Adjustment Options

Step 5.4: Cable Management

1. Use the provided cable clips to neatly route your TV cables along the back of the main support pillar. This helps maintain a clean and organized appearance.

Figure 5.4: Cable Management System

6. Operating Instructions

6.1 Swivel Function

The Perlegear TV stand features an enhanced swivel flexibility of 50 degrees left and right (±25° from center). To adjust the viewing angle, gently grasp the sides of your TV and rotate it to the desired position. Ensure the base remains stable during adjustment.

Figure 6.1: Swivel Range of the TV Stand

6.2 Height Adjustment

The stand offers 8 height configurations to position your TV at an optimal eye level. To change the height, you will need to unmount the TV from the stand, adjust the mounting plate or bracket height settings on the pillar, and then re-mount the TV. Refer to Step 5.3 for detailed height adjustment instructions.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the stand. For the tempered glass base, a glass cleaner can be used. Avoid abrasive cleaners or solvents that may damage the finish.
• Periodic Checks: Regularly check all screws and bolts to ensure they remain tight and secure. Loose connections can compromise stability.
• Damage: If any part of the stand becomes damaged, discontinue use immediately and contact customer support for replacement parts or advice.

8. Troubleshooting

9. Specifications

10. Warranty and Customer Support

Perlegear stands behind the quality of its products. For warranty information, technical assistance, or to report missing/damaged parts, please contact Perlegear customer support through the retailer's platform or visit the official Perlegear website.

Online Resources: For additional support, FAQs, and product videos (if available), please visit the Perlegear Store on Amazon.