Claiks 55-Inch Glass Standing Desk with Drawers Instruction Manual

1. Introduction

Thank you for choosing the Claiks 55-Inch Glass Standing Desk with Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new adjustable desk. Please read it thoroughly before use and retain it for future reference.

Key Features:

• Electric Height Adjustment: Smoothly adjusts from 28.3 inches to 46.5 inches with four programmable height presets.
• Multi-Functional Design: Equipped with USB-A and Type-C ports for charging devices.
• Storage Drawers: Built-in pull-out drawers for desktop organization.
• Tempered Glass Table Top: Modern, easy-to-clean surface that can also be used for writing.
• Simple Assembly: Designed for quick and straightforward installation.

2. Safety Information

Important Safety Instructions:

• The clamping arm should not be used on top of the glass tempered table top.
• Charging on the USB ports may be temporarily suspended when adjusting the desktop height.
• The desk is capable of supporting up to 132 pounds. Do not exceed this weight limit.
• Proper anchoring techniques should be used to ensure stability and prevent tipping, especially when the desk is in its highest position.
• Keep children and pets away from the desk during operation.
• Ensure all cables are properly managed to prevent tripping hazards or damage during height adjustments.

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included installation instruction manual for a detailed list of components. The package typically includes:

• Glass Tabletop with integrated control panel and drawers
• Desk Legs (2)
• Crossbars/Frame components
• Motor and connecting rod
• Power cord and adapter
• Assembly hardware (screws, Allen wrench)
• Cable management clips

4. Setup and Assembly

Follow these steps for proper assembly. It is recommended that two people assemble the desk due to its size and weight.

1. Attach Desk Legs to Frame: Secure the desk legs to the main frame components using the provided screws. Ensure all connections are tight.
2. Connect Motor and Rod: Insert the connecting rod into the motor and the opposite leg. Ensure it is properly seated.
3. Attach Tabletop: Carefully place the tabletop upside down on a soft, clean surface. Attach the assembled leg and frame structure to the underside of the tabletop using the designated screws.
4. Connect Cables: Plug in the motor cable to the control panel and the power adapter. Use the included cable clips to manage and secure all cables neatly under the desk.
5. Power On and Test: Plug the desk into a power outlet. Test the height adjustment functions using the control panel.

Assembly Video:

5. Operating Instructions

Height Adjustment:

The desk features an electric height adjustment system with a control panel located on the front edge of the tabletop.

• Up/Down Buttons (▲ / ▼): Press and hold to manually adjust the desk height.
• Height Memory Presets (1, 2, 3, 4):
  1. Adjust the desk to your desired height using the Up/Down buttons.
  2. Press the "M" button, then press one of the number buttons (1-4) to save the current height to that preset.
  3. To recall a saved height, simply press the corresponding number button.

USB Charging Ports:

The control panel includes USB-A and Type-C ports for charging your devices. Simply plug in your device's charging cable. Note that charging may pause during height adjustments.

Using the Drawers:

The integrated pull-out drawers provide convenient storage for small office supplies, keeping your desktop clutter-free.

6. Maintenance

• Cleaning the Glass Top: Use a soft cloth and a glass cleaner or mild detergent to clean the tempered glass surface. Avoid abrasive cleaners or tools that could scratch the glass.
• Motor and Frame: Periodically check all screws and connections to ensure they are tight. Wipe down the metal frame with a damp cloth.
• Cable Management: Regularly inspect cables for any signs of wear or damage. Ensure they remain securely fastened with the cable clips.
• Weight Limit: Do not overload the desk. The maximum weight capacity is 132 pounds.

7. Troubleshooting

If you encounter any issues with your Claiks standing desk, refer to the following common solutions or consult the provided videos.

• Desk Legs Not Same Height: If the two desk legs are not at the same height, insert the provided adjustment rod into the left leg's hexagonal nut and turn to adjust until both legs are level.

  Video 7.1: Guide to correcting misalignment between desktop holes and table legs.

• Asynchronous Elevation of Left Leg (Non-Motor Side): If the non-motor side leg is not elevating synchronously, use the adjustment rod to correct the issue.

  Video 7.2: Instructions for fixing asynchronous leg elevation.
• "rES" Mode on Control Panel: If the control panel displays "rES", this indicates a reset is needed. Follow the steps in the video below to resolve.

  Video 7.3: Step-by-step guide to resolving "rES" mode on desk control panels.

8. Specifications

9. Warranty and Support

The Claiks 55-Inch Glass Standing Desk comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty documentation included with your product or contact Claiks customer support.

For any questions, technical assistance, or support needs, please contact Claiks customer service. Contact information can typically be found on the product packaging or the official Claiks website.

You can also visit the Claiks Store on Amazon for more information and support resources.