Introduction
This manual provides essential information for the safe and effective use of your ACEZUK M01 Portable Car Jump Starter with Air Compressor. This device is designed to provide emergency jump-starting for 12V vehicles, inflate tires, and serve as a portable power bank and flashlight.
What's Included
- 1x ACEZUK M01 Jump Starter with Air Compressor
- 1x Smart Jumper Cables
- 1x Air Pump Hose
- 4x Gas Nozzles
- 1x USB-C Charging Cable
- 1x User Manual
- 1x Portable EVA Carrying Case
Safety Information
Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Always ensure proper polarity when connecting jumper cables (red to positive, black to negative).
- Do not use the air pump function continuously for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
- Keep the device away from children.
- Do not expose the device to rain or wet conditions.
- Do not attempt to jump start a frozen battery.
- It is suggested to start the car when the jump starter's power is greater than 25%.
Setup
Initial Charging
Upon first receiving the ACEZUK M01, fully charge the unit using the provided USB-C charging cable. Although the device may show a full charge, an initial full charge is recommended to activate the battery and prolong its lifespan.
Connecting Air Pump Hose
To use the air compressor, connect the air pump hose to the designated port on the device. Ensure it is securely fastened.
Connecting Smart Jumper Cables
The smart jumper cables connect to the jump starter via a dedicated port. Ensure a tight connection before attempting to jump start a vehicle.
Operating Instructions
Jump Starting Your Vehicle
- Insert the smart jumper cable into the jump starter.
- Connect the red clamp to the positive (+) terminal of your car battery and the black clamp to the negative (-) terminal.
- Start your car engine.
- Immediately remove the clamps from the car battery after the engine starts.
Image: Step-by-step guide for jump starting a vehicle.
Using the Air Compressor
The integrated air compressor provides up to 150 PSI of airflow. It features 4 preset modes for different items (cars, motorcycles, bikes, balls) and automatically stops when the preset pressure is reached.
- Assemble the air pump hose and attach the appropriate gas nozzle.
- Connect the hose to the tire valve or item to be inflated.
- Use the 'M' button to select the desired inflation mode (car, motorcycle, bike, ball). Adjust the target pressure using the '+' and '-' buttons.
- Press the 'OK' button to start inflation. The device will stop automatically when the target pressure is reached.
Image: The ACEZUK M01 connected to a car tire for inflation.
Using the LED Light
The device includes a high-lumen LED flashlight with multiple modes for various situations.
- Press the light button once for a steady bright light.
- Press again for strobe mode.
- Press a third time for SOS signal mode.
- Press a fourth time to turn off the light.
Image: The ACEZUK M01 demonstrating its 400 lumen LED light with various modes.
Using as a Power Bank
The ACEZUK M01 features two USB outputs (5V/3.1A) and one Type-C input/output (5V/3A) to charge mobile devices.
- Connect your mobile device to one of the USB output ports or the Type-C port using an appropriate charging cable.
- The device will begin charging your connected device.
Image: The ACEZUK M01 functioning as a power bank, charging a phone and a tablet.
Understanding the 3.4" LCD Display
The large 3.4-inch digital screen displays operational status, battery level, and potential error codes in real-time, providing clear information at a glance.
Image: Detailed view of the ACEZUK M01's large digital display.
Maintenance
- Recharge the car jump pack every 2-3 months to activate the battery and prolong its lifespan.
- If the air pump gets seriously hot during continuous use, cool it down for a few minutes before continuing to inflate.
Troubleshooting
If the device does not function as expected, check the following:
- Device Power: Ensure the jump starter has sufficient charge (above 25% for jump-starting).
- Cable Connection: Verify that jumper cables are securely connected to both the jump starter and the vehicle battery terminals with correct polarity.
- Error Codes: Refer to the 3.4" LCD display for any error codes and consult the detailed user manual for specific interpretations and solutions.
- Air Compressor Overheating: If the air compressor stops, it may be due to overheating. Allow it to cool down before resuming operation.
Specifications
| Feature | Detail |
|---|---|
| Brand | ACEZUK |
| Model | M01 |
| Battery Cell Composition | Lithium Polymer |
| Voltage | 12 Volts |
| Product Dimensions | 1.53"D x 3.64"W x 7.12"H |
| Vehicle Service Type | ATV, Cars, Trucks, Motorcycles, Lawnmowers, SUVs, Snowmobiles, Boats |
| Battery Capacity | 26800 Milliamp Hours (99.16Wh) |
| Peak Output Current | 8000 Amps |
| USB1+USB2 Output | 5V=3.1A |
| Type-C Input/Output | 5V=3A |
| Air Compressor Pressure | 150 PSI |
| LED Light | 400 Lumen (Bright/Strobe/SOS) |
Image: Detailed diagram of the ACEZUK M01's components and controls.
Warranty and Support
The ACEZUK M01 Portable Car Jump Starter with Air Compressor comes with a 2-YEAR FREE Warranty. Additionally, customers receive Lifetime Technical Support and 7/24 Customer Service for any inquiries or assistance needed.
Product Video
Video: An official overview of the ACEZUK M03 Jump Starter, demonstrating its features and usage.