1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your QAZAKY PZ13 carburetor. Please read these instructions carefully before proceeding with installation or use to ensure proper function and longevity of the product.
2. Product Overview
The QAZAKY PZ13 carburetor is a high-quality replacement component designed for various small 2-stroke engines. It is manufactured to meet or exceed OEM specifications, ensuring a precise fit and reliable performance. This carburetor is engineered for durability and ease of installation, providing optimal fuel-air mixture for efficient engine operation.

Image 2.1: Front view of the QAZAKY PZ13 Carburetor.
3. Compatibility
This carburetor is compatible with 2-stroke engines ranging from 43cc to 50cc. It is suitable for a wide range of small vehicles and equipment, including but not limited to:
- Minimoto, ATV, Quad, Scooter, Go Kart
- Moped, Chopper, Brush Cutter, Pocket Bike
- Pit Bike, Mini Bike, Rocket Bike, Kids Bike, Super Bike
- 50cc SYX Holeshot Kids Mini Dirt Bike, G-Scooter X1, X2, X6, X8
It is also compatible with various brands such as TaoTao, Kazuma, Sunl, Buyang, Baja, Coolster, Coolsport, Lifan, Zongshen, Loncin, Apollo, Jonway, Roketa, Redcat, Kymco, Panterra, Znen, NST, BMX, SDG, SSR, YX, CG, GPX, and KAYO.

Image 3.1: The carburetor is suitable for a wide range of mini motos, ATVs, quads, and scooters.

Image 3.2: The carburetor is compatible with Bladez Keyang Scooter, Hedge Trimmers, Brush Cutters, Blower, Edger, and Cultivator.
4. Package Contents
Upon opening the package, please verify that all the following components are present:
- 1 x PZ13 Carburetor
- 1 x Gasket
- 1 x Air Filter
- 1 x Clamp
- 1 x Mounting Bracket
- 2 x Screws

Image 4.1: The complete carburetor kit, including the carburetor, gasket, air filter, clamp, mounting bracket, and screws.
5. Setup (Installation)
The QAZAKY PZ13 carburetor is designed for straightforward installation. It is recommended to consult a service manual for your specific vehicle or equipment for detailed removal and installation procedures. Always ensure the engine is cool and disconnected from any power source before beginning work.
- Preparation: Gather necessary tools. Ensure the engine is off and cool.
- Remove Old Carburetor: Disconnect the fuel line, throttle cable, and choke cable (if applicable). Unbolt the old carburetor from the intake manifold and air filter housing.
- Clean Mounting Surfaces: Thoroughly clean the intake manifold and air filter housing mounting surfaces to ensure a proper seal.
- Install New Gasket: Place the new gasket (included) between the intake manifold and the new carburetor.
- Mount New Carburetor: Position the new QAZAKY carburetor and secure it with the provided screws and mounting bracket. Ensure a snug fit without overtightening.
- Connect Components: Reconnect the fuel line, throttle cable, and choke cable. Ensure all connections are secure and free from leaks.
- Install Air Filter: Attach the new air filter with the clamp to the carburetor's air intake.
- Final Check: Double-check all connections and ensure no tools or debris are left in the engine area.

Image 5.1: The carburetor is designed for easy installation, matching original equipment for a perfect fit.

Image 5.2: A close-up view of the carburetor's mounting points, illustrating its design for straightforward replacement.
6. Operating
After successful installation, the engine should start and run smoothly. The carburetor is pre-tuned for general use. If your engine requires specific adjustments, refer to your vehicle's service manual for carburetor tuning procedures. Always operate your vehicle or equipment in a well-ventilated area.
7. Maintenance
Regular maintenance ensures optimal performance and extends the life of your carburetor and engine.
- Air Filter: Regularly inspect and clean or replace the air filter. A clogged air filter can restrict airflow, leading to poor engine performance and increased fuel consumption.
- Fuel Quality: Use clean, fresh fuel appropriate for your engine. Stale or contaminated fuel can clog carburetor jets.
- Fuel Lines: Check fuel lines for cracks, leaks, or blockages. Replace as needed.
- Storage: If storing the vehicle for an extended period, drain the fuel from the carburetor bowl or use a fuel stabilizer to prevent gumming.
8. Troubleshooting
If you encounter issues after installing the carburetor, consider the following common troubleshooting steps:
- Engine Not Starting:
- Check fuel supply: Ensure there is fuel in the tank and the fuel line is not kinked.
- Spark plug: Inspect the spark plug for fouling or damage.
- Choke: Ensure the choke is correctly engaged for cold starts and disengaged for warm starts.
- Poor Engine Performance (Rough Idling, Lack of Power):
- Air filter: A dirty air filter can restrict airflow. Clean or replace it.
- Fuel mixture: The carburetor may require fine-tuning. Refer to your vehicle's service manual.
- Vacuum leaks: Check for leaks around the intake manifold gasket.
- Fuel Leaks:
- Check fuel line connections: Ensure all fuel lines are securely attached and clamps are tight.
- Float bowl: Inspect the float bowl gasket for proper sealing.
9. Specifications
| Feature | Specification |
|---|---|
| Inner Diameter (Intake) | 13 mm (0.51 inches) |
| Intake Bolt Hole Spacing | 38 mm (1.5 inches) |
| Air Filter Hole Spacing | 38 mm (1.5 inches) |
| Weight | 281 grams (approx. 0.62 lbs) |
| Package Dimensions | 21.11 x 14.5 x 6.4 cm (8.31 x 5.71 x 2.52 inches) |

Image 9.1: Measurement indicating the 13mm (0.51 inch) inner diameter of the carburetor intake.

Image 9.2: Measurement indicating the 38mm (1.5 inch) bolt hole spacing for mounting.
10. Warranty & Support
QAZAKY products are manufactured with high-quality standards. If you encounter any issues or have questions regarding your carburetor, please contact QAZAKY customer service through the Amazon message system. Our advanced factory has ten years of technological accumulation, ensuring high-quality products and a strict quality control system.