MekedeTech Android 13 Car Radio Instruction Manual

Product Overview

This manual provides detailed instructions for the installation and operation of your MekedeTech Android 13 Car Radio. This multimedia player is designed as an upgrade for BMW 3 Series E90/E91/E92/E93 (2009-2013) and BMW 5 Series E60/E61 (2008-2010) vehicles equipped with the CIC iDrive system. It features an 8-core CPU, 4GB RAM, 64GB ROM, 8.8-inch IPS touch screen, built-in wireless CarPlay, wired Android Auto, DSP sound system, and retains original car functions.

Package Contents

Please verify that all items listed below are included in your package:

• Main Unit (Machine)
• Packaging Box
• Power Cable
• GPS Antenna
• AUX Cable
• 4G Antenna
• Microphone (MIC)
• USB Cable

Image: Contents of the MekedeTech Android 13 Car Radio package, including the main unit, power cables, antennas, and accessories.

Compatibility Check

This Android touch screen radio upgrade is compatible with BMW 3 Series E90/E91/E92/E93 (2009-2013) and BMW 5 Series E60/E61 (2008-2010) vehicles that have a factory CIC iDrive system. It is not compatible with vehicles without a factory car screen or BMW 5 series F10 models. Ensure your car has an AUX-IN port for sound functionality. If not, an FM transmitter must be purchased separately.

Image: A compatibility chart showing different BMW iDrive systems (CCC, CIC, NBT, EVO) and their corresponding LVDS connections, indicating that the 4PIN LVDS connection for CIC systems is compatible.

Installation Guide

The installation process involves removing the original car radio components, connecting the new harness, and installing the new display unit. It is recommended to watch the full installation video before beginning.

Installation Video

Video: A detailed installation guide for the MekedeTech Android 13 Car Radio in a BMW vehicle, demonstrating each step from removal to final setup.

Factory Radio Removal

1. Carefully pry off the trim panel above the air vents using a plastic pry tool.
2. Disconnect the hazard light and central lock button connectors from the trim panel.
3. Remove the air vent assembly.
4. Unscrew the screws securing the climate control panel.
5. Gently pull out the climate control panel and disconnect its wiring harness.
6. Unscrew the screws securing the original CD/radio unit.
7. Pull out the original CD/radio unit and disconnect all cables, including the main power harness and fiber optic cable (if present).
8. Remove the original display screen from the dashboard. Disconnect its cables.

Harness Connection

1. Connect the provided power harness to the original car's main power connector.
2. Note: If your car has a fiber optic cable (green color), please plug it into the power harness of the new unit.
3. Connect the other end of the new power harness to the original CD/radio unit.
4. Connect the 4G module to the designated port on the new display unit.
5. Connect the GPS module to the designated port on the new display unit.
6. Connect the USB cable to the new display unit.
7. Connect the power cable to the new display unit.
8. Connect the LVDS plug to the new display unit.

GPS Antenna & 4G Antenna Placement

Route the GPS antenna and 4G antenna cables to a suitable location on the dashboard, ensuring they are not obstructed for optimal signal reception. You can place them discreetly within the dashboard area or on top of the dashboard.

Reinstall The Panel

1. Carefully place the new Android display unit into the dashboard opening.
2. Reconnect the original CD/radio unit and secure it with screws.
3. Reconnect the climate control panel and secure it with screws.
4. Reinstall the air vent assembly.
5. Reconnect the hazard light and central lock button connectors to the trim panel.
6. Snap the trim panel back into place.

Important Note: Before fully reassembling the dashboard, please check all functions of the car radio, such as sound, FM radio, Bluetooth, etc., to ensure proper operation.

Image: A side-by-side comparison showing the original BMW iDrive screen before installation and the new MekedeTech Android 13 Car Radio screen after installation, highlighting the larger display and modern interface.

Operating Instructions

Screen Resolution Settings

To adjust the screen resolution for optimal display, navigate to the system settings on the Android unit. Select 'Factory Head Unit Parameter Setting' then 'Original Menu Resolution Adjustment'. Choose the appropriate resolution for your original car display, such as 'CCC 400x250' or other available options, to ensure proper scaling and clarity.

AUX Sound Settings

For audio output, ensure your original car's AUX input is activated. Access the original iDrive menu, go to 'Entertainment', and select 'External audio source' to choose 'Audio AUX'. This will enable sound from the Android unit through your car's speakers. Adjust treble and bass settings as desired within the AUX menu.

Bluetooth Connectivity

The unit features built-in Bluetooth for hands-free calling and audio streaming. Pair your mobile phone with the unit via Bluetooth settings. You can control calls and music playback using the steering wheel buttons.

Image: The MekedeTech Android 13 Car Radio display showing the built-in Bluetooth interface for mobile phone pairing and hands-free dialing, emphasizing driving safety.

DSP Sound Adjustments

Utilize the powerful built-in DSP chip to customize your audio experience. The unit supports 32 equalizer adjustments, allowing precise control over various frequency ranges for enhanced sound quality.

Image: The MekedeTech Android 13 Car Radio display showing the 32-band equalizer interface for detailed sound adjustments, allowing users to fine-tune audio output.

Wireless CarPlay and Wired Android Auto

Enjoy seamless integration with your smartphone. The unit supports built-in wireless CarPlay and wired Android Auto, providing access to navigation, music, messages, and more directly on the car's display.

Aftermarket Backup Camera Installation (Optional)

If you wish to install an aftermarket backup camera, follow these steps:

1. Connect the yellow RCA video cable from the backup camera to the 'CAMERA IN' port on the main unit.
2. Connect the red power wire from the camera's video cable to the reverse light power source in your vehicle.
3. Connect the short red wire labeled 'BACK' from the main unit's harness to the reverse light power source as well. This signals the unit to switch to the camera view when reverse gear is engaged.
4. Route the camera cable neatly to the rear of the vehicle.

Backup Camera Screen Resolution Settings

After installing an aftermarket backup camera, you may need to adjust its settings for optimal display. Navigate to the system settings on the Android unit, then select 'Factory Head Unit Parameter Setting'. Under 'Rear Camera Type', choose 'Aftermarket Rear Camera' and select the appropriate camera type (e.g., AVM, AHD, TVI, 1080p) that matches your installed camera for the best image quality.

Specifications

• Operating System: Android 13
• CPU: 8-Core
• RAM: 4GB
• ROM: 64GB
• Display Size: 8.8 Inches
• Display Resolution: 1280x480
• Touch Screen Type: Capacitive
• Connectivity Technology: Wireless (WiFi, Bluetooth)
• Special Features: Bluetooth, Touchscreen, Wireless Android Auto, Wireless CarPlay
• Audio Output Mode: AUX, Stereo
• Map Type: Worldwide
• Voice Command: Buttons, Keyboard, Mouse, Touchscreen
• Vehicle Service Type: Car

Troubleshooting

• No Sound After Installation: Ensure your car has an AUX-IN port and it is activated in the original iDrive system. If no AUX-IN, an FM transmitter is required.
• Display Issues: Check the screen resolution settings in the Android unit's factory settings to match your original car's display resolution.
• Connectivity Problems (GPS/4G): Ensure antennas are properly connected and placed in an unobstructed location for optimal signal reception.
• CarPlay/Android Auto Not Connecting: Verify Bluetooth and Wi-Fi connections. For wired Android Auto, ensure the USB cable is securely connected.
• Original Car Functions Not Retained: Double-check all harness connections, especially the main power harness and fiber optic cable (if applicable).

Warranty and Support

This product comes with a 1-Year Warranty. For technical support, troubleshooting assistance, or warranty claims, please contact MekedeTech customer service through your original point of purchase. Please have your product model number and purchase details ready when contacting support.