AGJ Restaurant Pager System Wireless 20 Coaster Beeper (Model BCT-9306) Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your AGJ Restaurant Pager System. This wireless system, featuring a 998-channel touch keypad transmitter and 20 coaster pagers, is designed to enhance customer queue management in various environments such as restaurants, food trucks, churches, nurseries, clinics, and coffee shops.

Image: The AGJ Restaurant Pager System, showcasing the main transmitter unit with two stacks of 10 coaster pagers each, totaling 20 pagers. The digital display on the transmitter shows '999'.

Setup Instructions

The AGJ Restaurant Pager System is designed for straightforward setup. The system includes a wireless touch keypad transmitter and 20 coaster pagers. The pagers are typically pre-programmed and ready for use upon arrival. The double charging base requires only one power cable, optimizing counter space.

Initial Power-Up and Charging

1. Connect the power adapter to the charging base and a suitable power outlet.
2. Place all 20 coaster pagers onto the charging base. Ensure they are seated correctly to begin charging. Each pager has a built-in 3.7V 300mAh rechargeable battery.
3. Allow the pagers to fully charge before first use. A full charge provides approximately 20 hours of continuous working time.

Pairing Pagers (If Needed)

If you need to pair new pagers or re-pair existing ones, follow these steps:

1. Disconnect and Reconnect Power: Unplug the power adapter from the charging base, then plug it back in.
2. Enter Setup Mode: Immediately after reconnecting power, press the '←' (back) button and the 'CALL' button simultaneously and quickly. The display will show 'F1'.
3. Select Pager Number Change: Press the number '2' on the keypad. The display will show 'F2'. Then, press 'CALL'.
4. Input New Pager Number: Enter the desired new pager number (e.g., '88') using the keypad.
5. Pair Pager: Pick up the pager you wish to pair. While holding it, quickly press the 'CALL' button on the transmitter. The pager will flash and beep, and its display will show the newly assigned number.
6. Confirm: Place the pager back on the charging base. It is now paired with the new number.

For a visual guide on pairing and changing pager numbers, please refer to the video below:

Operating Instructions

The AGJ Pager System offers intuitive operation for efficient customer notification.

Calling a Pager

1. Ensure the desired pager is off the charging base and has sufficient battery.
2. On the transmitter keypad, enter the pager's number.
3. Press the 'CALL' button. The pager will activate according to its set prompt mode.

Image: Close-up of the AGJ Pager System's transmitter keyboard, showing the numerical input buttons and the 'CALL' button, which activates the pagers.

Prompt Modes

The pagers support 7 distinct prompt modes:

• Shake + Flash + Buzz
• Shake + Flash
• Flash + Buzz
• Shake + Buzz
• Shake Only
• Buzz Only
• Flash Only

Image: A single AGJ coaster pager, illustrating the three primary alert functions: vibration, audible beep, and flashing lights.

Adjusting Pager Beep Duration

To change how long a pager beeps/shakes when called:

1. Disconnect and Reconnect Power: Unplug the power adapter from the charging base, then plug it back in.
2. Enter Setup Mode: Immediately after reconnecting power, press the '←' (back) button and the 'CALL' button simultaneously and quickly. The display will show 'F1'.
3. Select Beep Time Setting: Press the number '3' on the keypad. The display will show 'F3'. Then, press 'CALL'.
4. Input Beep Duration: Enter the desired duration in seconds (e.g., '20' for 20 seconds) using the keypad.
5. Apply to Pager: Pick up the pager you wish to configure. While holding it, quickly press the 'CALL' button on the transmitter. The pager will activate with the new beep duration.

Turning Off Pager Beep

If you prefer the pager to only flash and shake without an audible beep:

1. Disconnect and Reconnect Power: Unplug the power adapter from the charging base, then plug it back in.
2. Enter Setup Mode: Immediately after reconnecting power, press the '←' (back) button and the 'CALL' button simultaneously and quickly. The display will show 'F1'.
3. Select Beep Off Setting: Press the number '4' on the keypad. The display will show 'F4'. Then, press 'CALL'.
4. Apply to Pager: Pick up the pager you wish to configure. While holding it, quickly press the 'CALL' button on the transmitter. The pager will now only flash and shake when called.

Turning Off All Charging Pagers

To turn off all pagers currently on the charging base, simply enter '999' on the transmitter keypad and press 'CALL'.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your AGJ Pager System.

• Cleaning: The transmitter keyboard is waterproof. Use a soft, damp cloth to wipe down the transmitter and pagers regularly. Avoid abrasive cleaners or solvents.
• Charging: Ensure pagers are placed on the charging base when not in use to maintain battery health. Regular charging helps prolong the lifespan of the built-in lithium-ion batteries.
• Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Image: An AGJ pager with an overlay indicating "24 Hours Working Time," highlighting the device's battery endurance.

Troubleshooting

This section addresses common issues you might encounter with your pager system.

• Pager Not Responding:
  • Check if the pager is fully charged.
  • Ensure the pager is within the operating range of 300 meters (980 feet). Obstacles like thick walls can reduce range.
  • Verify the pager number entered on the transmitter matches the pager's assigned number.
  • Attempt to re-pair the pager following the "Pairing Pagers" instructions in the Setup section.
• Short Paging Range:
  • The maximum range is 300 meters (980 feet) in an open area. Actual range may vary significantly due to environmental factors such as walls, metal structures, and other wireless interference.
  • Ensure the transmitter is placed in a central location with minimal obstructions.
  • Avoid placing the transmitter near large metal objects or other electronic devices that may cause interference.
• Difficulty with Pager Settings (Beep/Number Change):
  • The setup process for changing pager numbers or beep settings requires quick and precise button presses after power cycling. Refer to the "Pairing Pagers" and "Operating Instructions" sections and the provided video for detailed steps.
  • Ensure you are performing the steps immediately after disconnecting and reconnecting the power.
• Adding More Pagers:
  • Yes, additional pagers can be added to your existing system. Follow the "Pairing Pagers" instructions in the Setup section to assign new numbers to the additional pagers.

Specifications

Image: Diagram illustrating the physical dimensions of the AGJ Pager System transmitter and a single coaster pager.

Warranty Information

Specific warranty details for the AGJ Restaurant Pager System are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims. For detailed information regarding warranty coverage and terms, please refer to the documentation included with your product or contact the seller directly.

Customer Support

For further assistance, technical support, or inquiries regarding your AGJ Restaurant Pager System, please contact the seller or manufacturer. AGJ is a wireless communication product manufacturer dedicated to customer satisfaction.

You can often find contact information on the product packaging, the seller's storefront, or through the platform where the product was purchased.