MONTECH King 95 PRO PC Gaming Case User Manual

Introduction

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your MONTECH King 95 PRO Dual-Chamber ATX Mid-Tower PC Gaming Case. Designed for high-airflow and exceptional compatibility, this case features toolless panels, a sturdy curved tempered glass front, and pre-installed ARGB PWM fans.

Figure 1: Overview of the MONTECH King 95 PRO PC Gaming Case in Blue.

Setup and Installation

1. Unboxing and Component Identification

Carefully remove the case from its packaging. Inspect all components for any damage. The King 95 PRO includes six pre-installed ARGB PWM fans and a fan hub for convenient setup.

2. Panel Removal

The King 95 PRO features quick-release glass panels for easy access to the interior. Gently unlatch and remove the side and front tempered glass panels to begin your build. The case also includes a mesh front panel option for enhanced airflow.

Figure 2: Illustration of the 4mm industrial-grade curved tempered glass panel and optional mesh panel.

3. Motherboard Installation

The dual-chamber design provides ample space for ATX and Micro-ATX motherboards. Align your motherboard with the pre-installed standoffs and secure it with screws. A pinned standoff assists with alignment.

4. Storage Drive Installation

The case is designed to house up to 8 hard drives. Utilize the designated mounting points in the rear chamber for 3.5-inch and 2.5-inch drives. Note that the 3.5-inch drive cage may need to be removed for certain CPU cooler installations.

5. Power Supply Installation

Install your power supply in the dedicated rear chamber. The case supports dual power supplies and offers over 35mm of cable management space behind the motherboard tray.

6. Graphics Card Installation

The King 95 PRO is tailored for the mightiest 40 series graphics cards, including flagship 4090 models. Ensure proper seating and secure your graphics card to the PCIe slots.

7. Cooling System Installation

The case offers versatile cooling options:

• Top Radiator: Supports up to a 360mm radiator.
• Side Radiator: Supports 280mm with 240mm (up to 60mm thickness) without interference.
• Air Cooler Height: Accommodates air coolers up to 175mm in height.
• Fan Support: The case can accommodate up to 11 x 120mm fans for optimal cooling. It comes with six pre-installed fans (3x 120mm on bottom, 1x 120mm on back, 2x 140mm on side).

An innovative adjustable side fan bracket allows for enhanced airflow by rotating to the front, balancing cooling performance and aesthetics.

Figure 3: Diagram illustrating fan and radiator support locations and sizes within the case.

Operating Instructions

1. Powering On

Once all components are installed and cables are connected, press the power button located on the front I/O panel to turn on your system.

2. Front I/O Ports

The front I/O panel provides convenient access to essential ports:

• Power Button: To turn the system on/off.
• LED Button: To cycle through ARGB lighting modes.
• Audio Jack: For headphones or speakers.
• Microphone Jack: For microphone input.
• USB 3.0 Ports: High-speed data transfer.
• Type-C Port: Modern connectivity for compatible devices.

3. ARGB Lighting Control

The pre-installed ARGB fans and integrated RGB strip can be controlled via the dedicated LED button on the front I/O panel, offering almost 30 different color options. The lighting system is also compatible with motherboard RGB synchronization software such as ASUS Aura Sync, MSI Mystic Light Sync, and ASRock Polychrome Sync.

4. Airflow Modes

The King 95 PRO supports two primary airflow configurations:

• Elegant Glass Mode: Utilizes the curved tempered glass front panel, with air intake from the sleek side and bottom for a balanced blend of aesthetics and cooling.
• Turbo Mesh Mode: By replacing the glass front with the included mesh panel, this mode provides effective 3-directional cooling, drawing air from the front, side, and bottom, and expelling heat through the top and rear.

Figure 4: Comparison of Elegant Glass Mode and Turbo Mesh Mode for airflow optimization.

Maintenance

1. Cleaning Dust Filters

The case is equipped with multiple dust filters (bottom, side, and top) to prevent dust buildup. Regularly clean these filters to maintain optimal airflow and cooling performance. The bottom filter can be accessed from the rear, though some users may find it easier to access by slightly moving the case or by removing the front lip if comfortable doing so.

2. Cleaning Glass Panels

Use a soft, lint-free cloth and a mild glass cleaner to clean the tempered glass panels. Avoid abrasive materials that could scratch the surface.

3. Fan Maintenance

Periodically check the fans for dust accumulation on the blades. Use compressed air or a soft brush to gently remove dust from the fan blades and grilles.

Troubleshooting

• Issue: Top panel not seating correctly after AIO installation.

  Solution: Ensure that the screws used for the AIO mounting are low-profile. Some screws may interfere with the top panel seating. Refer to the screws provided with the case, as some may be specifically designed for this purpose.

• Issue: GPU sag with larger graphics cards.

  Solution: The case does not include a pre-installed anti-sag bracket. Consider purchasing an aftermarket GPU support bracket to prevent sag, especially with heavier graphics cards. Ensure the chosen bracket is compatible with the case's internal layout and fan placement.

• Issue: Difficulty removing bottom dust filter.

  Solution: The bottom dust filter is designed to be removed from the rear. If the case is placed against a wall, it may require moving the case slightly to access the filter. Ensure there is adequate clearance for removal and re-insertion.

• Issue: RGB lighting not functioning or syncing.

  Solution: Verify that all ARGB cables are securely connected to the fan hub and that the fan hub is correctly connected to the motherboard's ARGB header (if using software control) or the power supply. If using the LED button, cycle through the modes to ensure it's not on a static or off setting. Check motherboard software settings for proper synchronization.

Specifications

Warranty and Support

For warranty information, technical support, or any inquiries regarding your MONTECH King 95 PRO PC Gaming Case, please contact Montech customer service. Details can typically be found on the official Montech website or through your point of purchase. Please retain your proof of purchase for warranty claims.

You can visit the official Montech website for the latest drivers, FAQs, and support resources: www.montechpc.com