1. Introduction
The Vibe Tap Wireless Display Adapter is designed to facilitate seamless screen sharing from your device to a Vibe Smart Board. It offers a stable, high-resolution connection without the need for cables or complex software installations, enhancing collaboration and presentation experiences.
2. Product Overview
2.1 Package Contents
- Vibe Tap Wireless Display Adapter (Model TA01A)
2.2 Key Features
- Stable Screencasting: Utilizes 5G frequency band signals for reliable connectivity up to 15 meters, even without Wi-Fi.
- One-Tap Sharing: Initiate screen sharing quickly without additional cables, applications, or extensive setup.
- 4K Resolution Support: Supports screen sharing up to 4K resolution for clear presentations and content display.
- Broad Device Compatibility: Compatible with Windows, macOS, iPadOS, and Android devices equipped with a USB-C port.
- Touchback Control: Allows control of the connected laptop's applications directly from the Vibe Board's touchscreen.
2.3 Device Diagram
Image: The Vibe Tap Wireless Display Adapter, a white circular device with an integrated USB-C cable and connector, featuring a screen sharing icon on its surface.
3. Setup Instructions
Follow these steps to connect and begin using your Vibe Tap Wireless Display Adapter:
- Ensure Vibe Board is Ready: Power on your Vibe Smart Board and ensure it is in a state ready to receive a wireless display signal. The Vibe Tap connects directly to the Vibe Board's hotspot.
- Connect Vibe Tap to Your Device: Insert the USB-C connector of the Vibe Tap into an available USB-C port on your Windows, macOS, iPadOS, or Android device.
Image: The Vibe Tap device plugged into the USB-C port of a laptop, indicating a direct connection for screen sharing.
- Initiate Screen Sharing: Once connected, your device should automatically detect the Vibe Tap. Press the button on the Vibe Tap to initiate screen sharing to the Vibe Smart Board. The Vibe Tap will connect to the Vibe Board's 5G hotspot.
- Confirm Display: Verify that your device's screen is mirrored or extended onto the Vibe Smart Board.
Image: A laptop connected to the Vibe Tap, wirelessly displaying its screen content, including a video conference, onto a larger Vibe Smart Board.
4. Operating Instructions
4.1 Basic Screen Sharing
After connecting the Vibe Tap and initiating screen sharing (as described in Section 3), your device's display will be mirrored or extended to the Vibe Smart Board. Content displayed on your device will appear on the Vibe Board.
4.2 Touchback Control
The Vibe Tap supports Touchback Control, allowing you to interact with your laptop's applications directly from the Vibe Smart Board's touchscreen. To use this feature:
- Ensure your Vibe Smart Board is configured for Touchback Control.
- Once screen sharing is active, touch gestures on the Vibe Board will be sent back to your connected laptop, enabling control of the cursor and applications.
5. Compatibility
The Vibe Tap Wireless Display Adapter is compatible with the following operating systems and devices:
- Windows devices with a USB-C port.
- macOS devices with a USB-C port.
- iPadOS devices with a USB-C port.
- Android devices with a USB-C port.
The Vibe Tap is designed for use with Vibe Smart Boards. It is not intended for use with other display systems.
Image: Graphic illustrating compatibility with laptops, desktops, mobile phones, and tablets, each with a checkmark.
6. Troubleshooting
If you encounter issues while using your Vibe Tap, please refer to the following common solutions:
- No Display on Vibe Board:
- Ensure the Vibe Tap is securely plugged into your device's USB-C port.
- Verify the Vibe Smart Board is powered on and functioning correctly.
- Press the button on the Vibe Tap to re-initiate the connection.
- Restart both your source device and the Vibe Smart Board.
- Poor Video Quality or Lag:
- Ensure your device is within the recommended 15-meter range of the Vibe Smart Board.
- Minimize interference from other wireless devices operating on the 5GHz band.
- Check your source device's display settings to ensure optimal resolution output.
- Touchback Control Not Working:
- Confirm that your Vibe Smart Board's software is up to date and supports Touchback Control.
- Ensure the Vibe Tap is properly connected and recognized by both devices.
- Device Not Recognized:
- Try connecting the Vibe Tap to a different USB-C port on your device, if available.
- Ensure your device's USB-C port supports video output (DisplayPort Alternate Mode).
- Restart your source device.
7. Specifications
| Model Number | TA01A |
| Brand | Vibe |
| Item Weight | 8.4 ounces |
| Product Dimensions | 0.5 x 0.2 x 0.04 inches |
| Connectivity Technology | USB-C |
| Connector Type | USB-C |
| Resolution | 4K |
| Form Factor | Dongle/Small Adapter |
| Special Features | Vibe Smart Board Compatibility, 4K Screen Casting |
| Supported Internet Services | ChromeOS (in conjunction with Vibe Board) |
8. Warranty and Support
For information regarding product warranty, technical support, or service, please contact Vibe customer support directly. Details can typically be found on the official Vibe website or through your purchase documentation.
Vibe Customer Support: Please visit www.vibe.us/support for assistance.
