Introduction
Thank you for choosing the OKPRO 10000W Solar Street Light. This product is designed to provide efficient and reliable outdoor illumination using solar energy. It features advanced technology for wide-angle lighting, motion sensing, and durable, weatherproof performance. Please read this manual carefully before installation and use to ensure proper operation and longevity of your solar street light.
Safety Information
- Ensure all components are securely fastened during installation to prevent accidents.
- Do not attempt to disassemble or modify the product, as this may void the warranty and pose safety risks.
- Keep the solar panel clean and free from obstructions to ensure optimal charging efficiency.
- Avoid direct eye exposure to the LED light when it is operating at full brightness.
- For first-time use, activate the street light at night and set the lighting mode after covering the solar panel and pressing the switch button to test functionality.
Package Contents
Verify that all items listed below are included in your package:
- Solar Street Light Outdoor
- Remote Control
- Mounting Hardware
- Instruction Manual
Image: Detailed view of all components included in the OKPRO 10000W Solar Street Light package.
Product Overview
The OKPRO 10000W Solar Street Light is equipped with advanced features for superior outdoor lighting:
- 240° Wide-Angle Lighting: Features 1458 pcs 5730 SMD LEDs for broad and bright illumination, covering up to 2153 square feet.
- High Efficiency: Utilizes a 6V/35W polycrystalline silicon solar panel for efficient energy conversion and a large-capacity 60,000mAh battery for extended runtime.
- Intelligent Control: Offers three lighting modes (Motion Sensor, Dusk to Dawn, Brightness Adjustment) and timed lighting settings (3, 5, or 8 hours) via remote control.
- IP66 Waterproof Rating: Designed to withstand heavy rain and snow, ensuring durability in various weather conditions.
Image: 240° Wide-Angle Illumination and Coverage Area.
Image: Detail of the 1458 ultra-bright LED beads.
Setup & Installation
The OKPRO Solar Street Light offers two installation methods: wall-mounted and pole-mounted. No wiring is required.
Installation Steps:
- Prepare for Installation: Before installation, cover the solar panel to prevent the light from activating prematurely. Press the switch button on the light unit to test if it functions properly.
- Assemble the Mounting Arm: Attach the mounting arm to the light body using the provided screws and tools. Ensure all bolts are tightened securely.
- Choose Installation Location: Select a location that receives ample direct sunlight for the solar panel throughout the day. The recommended installation height is 16-26 feet from the ground.
- Mount the Light:
- Wall-Mounted: Use the provided mounting hardware to secure the light to a sturdy wall.
- Pole-Mounted: The light is suitable for pole diameters ranging from 1.5 to 4 inches. Secure the light to the pole using the appropriate mounting hardware.
- Initial Charging: After installation, allow the solar panel to charge in direct sunlight for 6-8 hours before first use. The light will automatically enter light sensing mode, turning off during the day for charging and turning on at night for illumination.
Image: Two available installation methods: Wall Mount and Pole Mount.
Image: All-in-One Design, Easy Installation, No Wiring Required.
Installation Video:
Video: Official product video demonstrating the installation process of the solar street light.
Operating Instructions
The solar street light can be controlled using the included remote control.
Remote Control Functions:
- ON/OFF: Press the 'ON' button to turn on the lights. Press 'OFF' to turn off the lights.
- Motion Sensor Mode: The light operates at 30% brightness and increases to 100% upon detecting motion. It reverts to 30% after 30 seconds without movement. This is the default mode when no timer is set.
- Brightness Adjustment: Use the percentage buttons (25%, 50%, 75%, 100%) to adjust the light's brightness.
- Timed Lighting Settings: Select 2H, 3H, 5H, 6H, or 8H to set a countdown timer for illumination. After the set time expires, the light will automatically enter motion sensing mode.
Image: Remote Control Use Instructions.
Dusk to Dawn Operation:
The street light automatically turns on at dusk and turns off at dawn, conserving energy and providing illumination only when needed.
Image: Radar Sensor Mode in action.
Maintenance
To ensure optimal performance and longevity of your solar street light, follow these maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Check for Obstructions: Ensure no trees, buildings, or other objects are blocking direct sunlight from reaching the solar panel.
- Inspect Mounting: Periodically check that the mounting hardware is secure and the light is firmly attached to its pole or wall.
- Weather Resistance: The light has an IP66 waterproof rating, making it resistant to rain and snow. No special weather-related maintenance is typically required beyond ensuring proper drainage around the unit.
Image: IP66 Waterproof rating ensures durability in all weather conditions.
Troubleshooting
If your solar street light is not functioning as expected, consider the following common issues and solutions:
- Light Not Turning On at Night:
- Ensure the solar panel is receiving sufficient direct sunlight for 6-8 hours daily.
- Check if the light is in 'Dusk to Dawn' mode or if a timer is set.
- Verify that the 'ON' button on the remote control has been pressed.
- Light Not Brightening with Motion:
- Confirm the light is in 'Motion Sensor Mode'.
- Ensure there are no obstructions blocking the motion sensor.
- Remote Control Not Working:
- Replace the AAA batteries in the remote control.
- Ensure there is a clear line of sight between the remote and the light's sensor.
If these steps do not resolve the issue, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | OKPRO |
| Model Number | S-1458JY |
| Wattage | 10000 watts |
| Brightness | 8000 lumen |
| Light Source Type | LED (1458 pcs 5730 SMD LEDs) |
| Color Temperature | 7000 Kelvin |
| Battery Capacity | 60,000mAh |
| Solar Panel | 6V/35W Polycrystalline Silicon |
| Photovoltaic Conversion Rate | 25% |
| Charging Time | 6-8 hours (in full sunlight) |
| Water Resistance Level | IP66 Waterproof |
| Lighting Angle | 240° Wide-Angle |
| Lighting Area Range | Max 2153 sq.ft |
| Installation Type | Wall and pole mounted |
| Recommended Installation Height | 16-26 feet |
| Suitable Pole Diameter | 1.5 to 4 inches |
| Control Method | Remote Control |
| Special Features | Adjustable Height, Energy Efficient, Motion Sensor, Timer, Waterproof |
Warranty & Support
The OKPRO 10000W Solar Street Light comes with a 24-month after-sales service. The product is certified by FCC, CE, and RoHS.
If you encounter any issues or are not completely satisfied with your purchase, please contact us through the Amazon message center. Our support team is committed to responding within 24 hours to provide a satisfactory solution.
Image: Product certifications and 2-year warranty information.
