Solong Tattoo EN01S-20-1203RL-X
Contents
Solong Tattoo Elite 1203RL-X Cartridge Needles Instruction Manual
Brand: Solong Tattoo | Model: EN01S-20-1203RL-X
Introduction
This manual provides essential information for the safe and effective use of Solong Tattoo Elite #12 Gauge 3-Needle Round Liner Extra Long Taper Cartridges, model EN01S-20-1203RL-X. These cartridges are designed for fine and precise line work, compatible with most tattoo pens.

Figure 1: Solong Tattoo Elite 1203RL-X Cartridge Needle
Safety Information
Warning: Use only according to instructions and safety guidelines. Improper use can cause injury. These cartridges are for single use only and must be disposed of properly after use.
Setup
Proper setup is crucial for safe and effective tattooing. Follow these steps:
- Ensure your tattoo machine is in good working order and clean.
- Carefully open the sterile packaging of the Solong Tattoo cartridge.
- Attach the needle cartridge securely to your tattoo machine according to the machine manufacturer's instructions.
- Fill the needle cartridge with the desired tattoo ink. Ensure the ink is suitable for tattooing.

Figure 2: Disassembled Solong Tattoo cartridge components

Figure 3: Tattoo artist using a Solong Tattoo cartridge needle
Operating Instructions
The Solong Tattoo Elite cartridges are designed for precision and comfort during tattooing:
- Advanced Ink Flow Control: The EN01S series features advanced ink flow control technology, ensuring precise ink distribution for sharp lines and smooth shading. This is ideal for intricate details.
- Reduced Skin Pressure: The innovative structural design minimizes skin pressure, reducing trauma during the tattooing process and ensuring a more comfortable experience for clients, even during long sessions.
- Compatibility: These cartridges are compatible with approximately 99% of tattoo machines on the market, offering versatility for various artists and setups.
- Begin tattooing following standard safety and technical guidelines for tattooing.

Figure 4: Ink discharge control feature of Solong Tattoo cartridge

Figure 5: Solong Tattoo cartridge highlighting dynamic smooth rebound
Maintenance and Disposal
Maintaining hygiene and proper disposal are paramount in tattooing:
- High-Quality Materials: Cartridges are constructed from medical-grade 316L stainless steel and high-tension silicone, sterilized by EO gas for safety and durability.
- Quality Assurance: Each needle undergoes a meticulous double inspection at 150x magnification to ensure the highest quality standards.
- Disposal: After each use, dispose of the needle cartridge properly in a sharps container, in accordance with all local regulations and safety standards for biohazardous waste. Never reuse cartridges.

Figure 6: Solong Tattoo cartridges emphasizing high-quality components

Figure 7: Solong Tattoo needle undergoing 150x magnification inspection
Troubleshooting
While Solong Tattoo cartridges are manufactured to high standards, issues can occasionally arise. Here are some general troubleshooting tips:
- Poor Ink Flow: Ensure the cartridge is correctly seated in the machine. Check if the ink cap is sufficiently filled and the ink is not too thick. If the issue persists, replace the cartridge.
- Needle Wobble: Verify the cartridge is firmly attached to the machine. A loose connection can cause instability. If the cartridge itself feels loose, it may be defective and should be replaced.
- Machine Malfunction: If you suspect the issue is with your tattoo machine rather than the cartridge, consult your machine's instruction manual or contact the machine manufacturer for support.
- Skin Irritation/Damage: Ensure proper tattooing technique, appropriate needle depth, and machine settings. Always use fresh, sterile cartridges. If severe irritation occurs, advise the client to seek medical attention.
Specifications
| Feature | Detail |
|---|---|
| Model | EN01S-20-1203RL-X |
| Needle Gauge | #12 (0.35mm) |
| Needle Type | Round Liner (RL) |
| Needle Count | 3 Needles |
| Taper | Extra Long Taper (7.0mm) |
| Material | Medical-grade 316L Stainless Steel, High-Tension Silicone |
| Sterilization | EO Gas Sterilized |
| Compatibility | Compatible with 99% of tattoo machines |
| Package Quantity | 20 Cartridges per pack |
| Color | Green |
| Country of Origin | China |

Figure 8: Various Solong Tattoo needle configurations

Figure 9: Needle taper lengths

Figure 10: Detailed needle configurations
Warranty and Support
Specific warranty information for Solong Tattoo Elite 1203RL-X Cartridge Needles is not provided in the product details. For any product-related inquiries or support, please refer to the seller or manufacturer's official contact channels. Always ensure you purchase from authorized distributors to guarantee product authenticity and access to any available support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.