OKPRO 10000W Solar Street Light User Manual

Introduction

Thank you for choosing the OKPRO 10000W Solar Street Light. This manual provides essential information for the proper installation, operation, and maintenance of your solar street light. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

What's in the Box

Upon unpacking, please verify that all the following components are included:

• 1x Solar Street Light
• 1x Light Pole
• Mounting Hardware
• 1x Remote Control
• 1x User's Manual (this document)

Key Features

• 320° Wide-Angle Lighting Design: This solar street light features 1680 high-brightness 5730 SMD LEDs, offering a 320° wide-angle illumination. This design provides a broader and brighter lighting range, covering an area of up to 2153 square feet.
• High Efficiency Solar Panel & Battery: Equipped with a 6V/35W polycrystalline silicon solar panel for efficient energy conversion. It includes a large-capacity 60,000mAh battery, designed for extended runtime and all-night illumination.
• Intelligent Control: The light offers three lighting modes and remote control functionality for user convenience:
  1. Motion Sensor Mode: Operates at 30% brightness, increasing to 100% upon detecting motion, then returning to 30% after 30 seconds of no movement.
  2. Dusk to Dawn: Automatically turns on at dusk and off at dawn.
  3. Brightness Adjustment: Four levels of brightness adjustment (25%, 50%, 75%, 100%).
  4. Timed Lighting Settings: Options for 2h/3h/5h/6h/8h of illumination.
• Super Sensitive Light Sensing Function: The light automatically detects ambient light. It charges during the day and illuminates at night.
• IP66 Waterproof Rating: Built to withstand various weather conditions, including heavy rain and snow.

Setup and Installation

The OKPRO Solar Street Light offers two primary installation methods: wall-mounted and pole-mounted. A pole is not included with the product. It is recommended to install the light at a height of 16-26 feet from the ground for optimal coverage.

Pre-Installation Check

Before permanent installation, perform an initial activation test:

1. Cover the solar panel completely to simulate darkness.
2. Press the power switch button on the light.
3. Verify that the light illuminates. If it does, the light is functioning correctly.
4. For first-time use, activate the light at night and set your desired lighting mode using the remote control. The light will then automatically enter light sensing mode, turning off during the day for charging and turning on at night for illumination.

Mounting Instructions

Choose between wall-mounting or pole-mounting based on your application. The provided mounting hardware is suitable for both.

Image: Illustration of pole mount and wall mount installation options.

• Pole Mount: The light is compatible with pole diameters ranging from 1.5 to 4 inches. Secure the light to the pole using the provided brackets and screws. Ensure the solar panel faces an area with maximum direct sunlight.
• Wall Mount: Attach the mounting bracket to a sturdy wall using appropriate screws and anchors. Then, secure the light fixture to the bracket. Ensure the solar panel is positioned to receive ample sunlight.

No wiring is required for installation, making it ideal for various outdoor locations such as parking lots, yards, streets, gardens, and horse arenas.

Operating Instructions

Your OKPRO Solar Street Light is designed for intelligent and efficient operation. Use the included remote control to manage its various settings.

Remote Control Functions

Image: Remote control layout and function overview.

• ON/OFF: Press to turn the light on or off.
• Motion Sensor Mode: When activated, the light operates at 30% brightness. Upon detecting motion, it increases to 100% brightness and reverts to 30% after 30 seconds of no movement. This mode is recommended for energy saving.
• Dusk to Dawn Mode: The light automatically turns on when it gets dark and turns off when it becomes light.
• Brightness Adjustment: Select desired brightness levels: 25%, 50%, 75%, or 100%.
• Timed Lighting: Set the light to stay on for a specific duration: 2 hours, 3 hours, 5 hours, 6 hours, or 8 hours. After the set time, the light will revert to its previous operating mode (e.g., motion sensor or dusk to dawn).

Important Note: The light cannot be manually turned on during daylight hours. The remote control functions are primarily for adjusting settings when the light is active at night.

Maintenance

To ensure the optimal performance and longevity of your solar street light, regular maintenance is recommended.

• Solar Panel Cleaning: Periodically clean the surface of the solar panel to remove dust, dirt, leaves, or other debris. A clean panel ensures maximum sunlight absorption and efficient charging. Use a soft cloth and mild soapy water if necessary, then rinse with clean water.
• Fixture Inspection: Regularly check the light fixture and mounting hardware for any signs of damage, loose connections, or corrosion. Tighten any loose screws and replace damaged components as needed.
• Battery Care: The integrated battery is designed for long-term use. Avoid prolonged periods of storage without charging, as this can reduce battery life.

Troubleshooting

If you encounter issues with your OKPRO Solar Street Light, please refer to the following common problems and solutions:

Specifications

Warranty and Support

OKPRO provides a 24-month after-sales service for the outdoor solar street light, as certified by FCC, CE, and RoHS. The manufacturer's warranty description states a 2-year warranty.

If you are not completely satisfied or encounter any issues with your product, please contact us through the Amazon message center. Our support team is committed to responding within 24 hours to provide a satisfactory solution.