Ymimi 616FJ140
Contents
Ymimi Replacement Filter User Manual
For Shark WZ250, WZ240, WZ240 26, WZ140 Pet Pro Cordless Stick Vacuums
Product Overview
This manual provides instructions for the Ymimi Replacement Filters, designed for use with Shark Pet Pro Cordless Stick Vacuum models including WZ250, WZ240, WZ240 26, WZ140, IX141, IX140, IZ140, IX142, IZ140C, IZ142, UZ145, IZ141C, and IX141H Series. The package includes 2 HEPA filters, 4 foam filters, and 4 felt filters, serving as direct replacements for original parts 616FJ140 and 617FJ140.

Image: Contents of the Ymimi Replacement Filter package, showing two HEPA filters and eight foam/felt filters.

Image: Visual representation of the filter compatibility with Shark WZ240 and WZ250 Pet Pro Cordless Stick Vacuum models.
Setup and Installation
Before installing the new filters, ensure your Shark Pet Pro Cordless Stick Vacuum is turned off and unplugged. Locate the existing filter compartment on your vacuum cleaner. Refer to your vacuum's original user manual for specific instructions on accessing the filter housing.
- Remove Old Filters: Carefully remove the used HEPA filter and foam/felt filters from their compartments. Dispose of them according to local regulations.
- Insert New Foam/Felt Filters: Place the new foam and felt filters into their designated slots. Ensure they are seated correctly and flat.
- Insert New HEPA Filter: Insert the new HEPA filter into its housing. Make sure it clicks securely into place.
- Close Compartment: Close the filter compartment cover securely.

Image: Visual guide demonstrating the proper placement of the HEPA and foam filters within the vacuum cleaner, highlighting the components.
Maintenance
Regular maintenance of your filters is crucial for maintaining optimal vacuum performance and air quality.
Cleaning the Filters
The foam and felt filters are reusable and can be washed. The HEPA filter is generally not washable and should be replaced when dirty.
- Remove Filters: Remove the foam and felt filters from the vacuum as described in the "Setup and Installation" section.
- Wash: Rinse the foam and felt filters under running water until the water runs clear. Gently squeeze out excess water.
- Air Dry: Allow the filters to air dry completely for at least 24 hours before reinserting them into the vacuum. Do not use a dryer or other heating device.

Image: A foam filter being rinsed under running water in a sink, demonstrating the washable and reusable nature of the filter.
Replacement Schedule
For optimum performance, it is recommended to replace your vacuum filters every 3-6 months, depending on usage frequency and household conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced Suction Power | Clogged or dirty filters. Filters not installed correctly. | Clean washable filters thoroughly. Ensure filters are completely dry before reinstallation. Replace filters if heavily soiled or damaged. Verify filters are seated correctly in their compartments. |
| Unusual Odor from Vacuum | Dirty filters retaining odors. | Clean washable filters. Replace all filters if odor persists. |
| Filters Don't Fit | Incorrect model compatibility. | Double-check your vacuum model number against the compatible models listed in this manual (WZ250, WZ240, WZ240 26, WZ140, IX141, IX140, IZ140, IX142, IZ140C, IZ142, UZ145, IZ141C, IX141H Series). |
Specifications
- Model Number: 616FJ140
- Compatible Devices: Shark Pet Pro Cordless Stick Vacuum (WZ250, WZ240, WZ240 26, WZ140, IX141, IX140, IZ140, IX142, IZ140C, IZ142, UZ145, IZ141C, IX141H Series)
- Included Components: 2 HEPA filters, 4 foam filters, 4 felt filters
- Material Type: Foam
- Reusability: Reusable (Foam/Felt filters)
- Item Weight: 8.4 ounces
- Product Dimensions: HEPA Filter: 4.8"L x 4.3"W x 2.95"H; Foam Filter: 4.7"L x 4.2"W x 2.2"H

Image: Detailed dimensions of both the HEPA filter and the foam filter, providing precise measurements for compatibility.
Support
If you encounter any issues with the product, or if the filters are not suitable for your specific model, please contact our customer service. We are committed to providing after-sales service and will respond to your inquiries within 24 hours.
For assistance, please refer to the contact information provided by your retailer or on the product packaging.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.