1. Product Overview
The unho Floor TV Stand with Mount, Model U-Z1187, is designed to securely hold flat LCD LED screen monitors ranging from 40 to 75 inches, with a maximum weight capacity of 80kg (176 pounds). This versatile stand features a robust metal frame, two wooden shelves for media devices, and integrated wheels for easy mobility. The VESA mounting patterns supported include 600x400mm, 400x400mm, 400x300mm, 300x300mm, 300x200mm, and 200x200mm. Its adjustable height feature allows for optimal viewing angles in various settings.
2. Safety Information
- Weight Capacity: Do not exceed the maximum load bearing capacity of 80kg (176 pounds) for the TV mount.
- TV Size: Ensure your television is within the recommended size range of 40-75 inches.
- VESA Compatibility: Verify your TV's VESA mounting pattern matches one of the supported patterns (600x400mm, 400x400mm, 400x300mm, 300x300mm, 300x200mm, 200x200mm).
- Assembly: Assembly is recommended for two individuals to ensure safety and proper installation.
- Stability: Always ensure all screws are securely tightened and the stand is balanced before mounting the TV. Use the adjustable foot pads to level the stand on uneven surfaces.
- Movement: When moving the stand, do so slowly and carefully, especially with a TV mounted. Ensure the path is clear of obstacles.
3. Package Contents
Please check that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer support.
- Main support frame components (metal poles, base)
- TV mounting bracket and arms
- Wooden shelves (2 tiers)
- Caster wheels (with locks)
- Adjustable rubber foot pads
- Hardware kit (screws, washers, spacers, Allen wrench)
- Instruction manual
4. Assembly Instructions
Assembly typically takes about 30 minutes with two people. Follow these steps carefully:
- Unpack and Identify Parts: Lay out all components on a soft, clean surface. Refer to the parts list to ensure everything is present.
- Assemble the Base: Attach the caster wheels or adjustable foot pads to the main base frame. If using wheels, ensure they are locked during assembly.
- Attach Vertical Support Poles: Secure the vertical support poles to the base using the provided hardware. Ensure they are firmly attached and aligned.
- Install Shelves: Mount the two wooden shelves to the support frame at the desired heights. Ensure they are level and securely fastened.
- Attach TV Mounting Bracket: Secure the TV mounting bracket to the top of the vertical support poles.
- Prepare TV for Mounting: Attach the TV mounting arms to the back of your television, ensuring the VESA pattern aligns correctly. Use the appropriate screws, washers, and spacers for your TV model.
- Mount the TV: With assistance, carefully lift your television and hook the mounting arms onto the TV mounting bracket on the stand. Secure the TV to the bracket using the safety screws or locking mechanisms provided.
- Cable Management: Utilize the cable management features on the back of the stand to organize and conceal cables for a tidy appearance.
5. Operating Instructions
Height Adjustment
The TV mount allows for height adjustment to achieve your preferred viewing level. The lowest height is approximately 48 inches, and the highest is 57 inches. To adjust the height, loosen the securing bolts on the vertical support poles, carefully raise or lower the TV mount to the desired position, and then securely tighten the bolts. Always ensure the TV is stable after adjustment.
Mobility
This TV stand is equipped with caster wheels for easy movement. To move the stand, unlock the wheels. When the stand is in the desired position, lock the wheels to prevent accidental movement and ensure stability. Always move the stand slowly and carefully, especially when a TV is mounted.
Cable Management
Utilize the integrated cable management system on the back of the stand to route and conceal power cords and AV cables. This helps maintain a clean and organized appearance and prevents tripping hazards.
6. Maintenance
- Cleaning: Wipe the metal and wooden surfaces with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Loose connections can affect the stand's stability.
- Wheel Maintenance: Keep the caster wheels free of dust and debris to ensure smooth movement.
7. Troubleshooting
- Stand feels unstable: Ensure all assembly screws are fully tightened. Check that the adjustable foot pads are properly leveled on uneven floors. Verify the TV's weight and VESA pattern are within the stand's specifications.
- TV does not fit the mount: Confirm your TV's VESA mounting pattern is compatible with the stand (e.g., 600x400mm, 400x400mm). Ensure the TV weight does not exceed 80kg (176 pounds).
- Difficulty moving the stand: Unlock all caster wheels. Check for any obstructions or debris around the wheels.
- Shelves are wobbly: Ensure the shelf attachment screws are securely tightened. Avoid placing excessively heavy items on the shelves.
8. Specifications
| Brand | unho |
| Model Number | U-Z1187 |
| Compatible TV Sizes | 40-75 inches |
| Max Load Bearing | 80kg (176 pounds) |
| VESA Compatibility | 600x400mm, 400x400mm, 400x300mm, 300x300mm, 300x200mm, 200x200mm |
| Product Dimensions | 35.83 x 19.69 x 57.09 inches (91 x 50 x 145 cm) |
| Item Weight | 35.2 pounds (16 kg) |
| Material | Metal, Wood |
| Color | Black+Brown |
| Mounting Type | Floor Mount |
| Movement Type | Fixed (TV mount), Mobile (Stand with wheels) |
9. Customer Support
For any questions regarding the assembly, operation, or maintenance of your unho Floor TV Stand, please contact unho customer support. Refer to your purchase documentation for specific contact details or visit the official unho website.
