Introduction
Thank you for choosing the SUPERONE MagSafe Phone Grip and Kickstand. This versatile accessory is designed to enhance your mobile experience by providing a secure grip, a multi-angle kickstand, and compatibility with MagSafe-enabled iPhones (iPhone 12, 13, 14, 15, 16, 17 Series) and MagSafe cases. Please read this manual carefully to ensure proper use and optimal performance of your device.
Image: The SUPERONE MagSafe Phone Grip securely attached to the back of an iPhone, demonstrating the finger loop in use for a stable hold.
Package Contents
- 1 x SUPERONE 4-in-1 MagSafe Phone Grip
- 2 x Elastic Straps (one pre-installed, one spare)
Image: The package contents, including the main MagSafe phone grip unit and two elastic straps, one of which is a spare.
Setup and Installation
Compatibility Check:
Ensure your iPhone is from the 12, 13, 14, 15, 16, or 17 Series. This grip is designed for direct attachment to MagSafe-compatible iPhones or MagSafe-enabled cases. It is not compatible with non-MagSafe cases or older iPhone models.
Attachment:
Align the SUPERONE MagSafe Phone Grip with the MagSafe ring on the back of your iPhone or MagSafe case. The strong magnets will automatically snap the grip into place, ensuring a secure connection. No additional adhesives or metal rings are required.
Image: A close-up view illustrating the magnetic attachment of the grip to the back of an iPhone.
Detachment:
To remove the grip, simply slide it off the MagSafe area. It is designed for easy removal without leaving any sticky residue, allowing for wireless charging when detached.
Operating Instructions
1. Using the Finger Loop Grip
- Insert your finger(s) into the elastic strap for a secure and comfortable hold.
- The strap's tightness can be adjusted to fit your fingers, providing a personalized and ergonomic grip.
Image: A hand demonstrating the secure and comfortable hold provided by the adjustable elastic finger loop.
2. Utilizing the Multi-View Kickstand
- The kickstand features dual joints that allow for 280° and 360° rotation, providing multiple viewing angles.
- Adjust the kickstand to prop your phone in both portrait and landscape orientations for hands-free viewing of videos, video calls, or browsing.
- The kickstand is tested for durability, designed to withstand over 50,000 folds without loosening.
Image: The phone grip functioning as a kickstand, showcasing its ability to hold the phone in both vertical and horizontal viewing positions.
Image: A visual representation of the grip's rotational capabilities (360 degrees) and its foldable design for compact storage.
3. 4-in-1 Functionality
This product combines multiple functions for comprehensive utility:
- MagSafe Kickstand: For hands-free viewing.
- MagSafe Grip: For a secure hold during use.
- MagSafe Strap: Adjustable strap for enhanced comfort and security.
- MagSafe Holder: Can be used to hang or secure your phone in various scenarios.
Image: Demonstrations of the product's four primary functions: kickstand, secure finger grip, adjustable strap, and versatile holder.
Maintenance and Care
- Cleaning: Wipe the grip with a soft, damp cloth to remove dust or smudges. Avoid harsh chemicals or abrasive materials.
- Strap Replacement: The elastic strap may wear out over time with frequent use. Replace it with the provided spare strap when necessary to maintain optimal grip comfort and security.
- Magnetic Area: Ensure the MagSafe area on your phone and the grip are clean and free of debris before attachment to prevent scratches or reduced magnetic strength.
Troubleshooting
- Issue: Grip does not attach securely or falls off easily.
Solution:
- Ensure your phone is a MagSafe-compatible iPhone (12-17 Series) or is using a certified MagSafe case.
- Check for any obstructions (e.g., dust, debris, non-MagSafe accessories) between the grip and your phone/case.
- Verify that the grip is properly aligned with the MagSafe ring on your device.
- Issue: Kickstand feels loose or does not hold position.
Solution:
- While the kickstand is designed for durability, extreme force or prolonged heavy use might affect its joints over a very long period. If it's a new product, contact support.
- Issue: Wireless charging is not working with the grip attached.
Solution:
- The SUPERONE MagSafe Phone Grip is designed to be easily removable for wireless charging. Detach the grip from your phone before placing it on a wireless charger.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SO-Z36-E |
| Brand | SUPERONE |
| Compatibility | iPhone 12/13/14/15/16/17 Series (and MagSafe Cases) |
| Magnetic Strength | Up to 5.5 lbs (2.5 kg) |
| Kickstand Rotation | 360° (main hinge), 280° and 360° (dual joints) |
| Material | 2025 Newest Super Magnetic MagSafe Grip |
| Dimensions | 5.08 x 2.83 x 0.71 inches |
| Item Weight | 2.39 ounces |
| Special Features | Adjustable, Ergonomic Design, Magnetic, Rotatable, Wireless Charging Compatible (when detached) |
Warranty and Support
All SUPERONE MagSafe finger grips come with a hassle-free 18-month warranty and lifetime technical support. If you encounter any issues or have questions regarding your product, please do not hesitate to contact the SUPERONE customer service team.
Contact Information:
- For support, please refer to the contact details provided on the official SUPERONE website or your purchase platform.
- The SUPERONE team provides 24/7 customer service to assist our valued customers.
For more information, visit the official SUPERONE Store on Amazon.
