Introduction
This manual provides detailed instructions for setting up and operating your AXFEE Xbox Wireless Adapter. This adapter allows you to connect your Xbox One, Elite Series (1/2), Xbox One X, and Xbox One S controllers wirelessly to your Windows 10/11 PC or tablet. Enjoy a stable wireless connection and enhanced gaming experience.
Image: The AXFEE Xbox Wireless Adapter plugged into a PC, illustrating compatibility with Xbox One, Xbox One S/X, and Xbox Elite Series 1 and 2 controllers.
Setup Instructions
- Connect the Adapter: Plug the AXFEE Xbox Wireless Adapter into an available USB 2.0 or 3.0 port on your Windows 10/11 PC or tablet. For optimal signal, consider using the included extension cable to position the adapter away from other electronics or obstructions.
- Driver Installation: The Windows system should automatically recognize the receiver and install the necessary drivers. If the adapter's indicator light does not begin to flash slowly after plugging it in, you may need to manually install drivers. Refer to your Windows device's support documentation for driver installation guidance.
- Prepare Your Controller: Ensure your Xbox controller has fresh batteries installed.
- Initiate Pairing on Adapter: Press and hold the pairing button on the AXFEE wireless adapter for 2 to 3 seconds. The indicator light on the adapter will begin to flash slowly, indicating it is in pairing mode.
- Initiate Pairing on Controller: Press and hold the wireless connection button located on the front of your Xbox controller. The Xbox button on the controller will start flashing rapidly.
- Complete Pairing: The indicator light on the adapter will flash quickly, and the Xbox button on your controller will become solid, indicating successful pairing. This process typically completes within 2 to 5 seconds.
Image: The AXFEE Xbox Wireless Adapter, highlighting its compatibility with PC, Laptop, and Tablet devices running Windows 10 or Windows 11. An LED indicator is also shown.
Operating Instructions
- Automatic Reconnection: Once paired, your controller should automatically reconnect to the adapter when both are powered on and within range.
- Multiple Controllers: The adapter supports connecting up to 8 wireless controllers simultaneously. For audio, it supports 4 mono headsets or 2 stereo headsets concurrently.
- Headset Compatibility: Please note that headset functionality (including in-game chat and high-quality stereo sound) is only supported under the Windows 10 operating system. Wireless connection of headsets is not supported; headsets must be connected directly to the controller.
- Wireless Range: The adapter provides a stable wireless transmission range of up to 9 meters (approximately 30 feet).
Image: The AXFEE Xbox Wireless Adapter centrally positioned, illustrating its capability to connect up to 8 wireless controllers simultaneously for a multi-player gaming experience.
Maintenance
The AXFEE Xbox Wireless Adapter is designed for durability with high-quality ABS material. To ensure its longevity:
- Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the adapter to extreme temperatures or humidity.
- Store the adapter in a safe place when not in use to prevent physical damage.
Troubleshooting
| Problem | Solution |
|---|---|
| Adapter indicator light does not flash after plugging in. | Ensure the adapter is fully inserted into a working USB 2.0 or 3.0 port. If the issue persists, you may need to manually install drivers for the adapter. Check your PC's device manager for unrecognized devices. |
| Controller does not pair with the adapter. |
|
| Unstable connection or frequent disconnections. |
|
| Headset audio not working. |
|
Specifications
- Model Number: Q1-3819594
- Brand: AXFEE
- Hardware Interface: USB 2.0
- Data Link Protocol: Bluetooth (Note: This adapter utilizes a specialized Bluetooth implementation optimized for Xbox controllers, functioning similarly to the official Xbox Wireless protocol for multi-device support and pairing.)
- Compatible Operating Systems: Windows 10, Windows 11
- Compatible Devices: Xbox One controllers, Xbox Elite Series (1/2) controllers, Xbox One X controllers, Xbox One S controllers
- Maximum Controllers Supported: Up to 8 wireless controllers simultaneously
- Headset Support: Up to 4 mono headsets or 2 stereo headsets (Windows 10 only, wired to controller)
- Wireless Range: Up to 9 meters (30 feet)
- Product Dimensions (Adapter): 35mm (L) x 16mm (W) x 7mm (H)
- Extension Cable Length: 110 cm
- Material: High-quality ABS plastic
Image: A diagram illustrating the physical dimensions of the AXFEE Xbox Wireless Adapter (3.5cm x 1.6cm x 0.7cm) and the extension cable (110cm). It also highlights support for up to 4 chat headsets or 2 stereo headsets.
Warranty and Support
For any questions or concerns regarding your AXFEE Xbox Wireless Adapter, please contact our customer support. We are committed to providing a satisfactory response as quickly as possible.
Please note that information regarding spare parts availability and software update guarantees is not available at this time.