DG Casa 70350-T-BCL

DG Casa Boucle Cloud Bed Frame with Arch Shaped Headboard - Twin Size Cream Boucle - Instruction Manual

Model: 70350-T-BCL

Important Safety Information

  • Read all instructions carefully before assembly.
  • Keep all parts and packaging materials out of reach of children.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
  • Do not use power tools for assembly unless specifically instructed, as overtightening may damage components.
  • Place the bed frame on a flat, stable surface.
  • Do not exceed the maximum weight limit of 400 pounds.

Assembly Instructions

Follow these steps to assemble your DG Casa Boucle Cloud Bed Frame. It is recommended to have two people for assembly.

Required Tools:

  • Hex Key (provided)

Parts List:

Refer to the diagram for identification of parts and hardware.

Diagram of bed frame dimensions and weight capacity

Image: Overall dimensions of the Twin size bed frame (81.3"L x 44.5"W x 48"H) and a weight capacity of 500 lbs. Note: Product specifications state 400 lbs, use the lower value for safety.

Diagram showing all parts and hardware for assembly

Image: Detailed diagram illustrating all components and hardware included for bed frame assembly.

Step-by-Step Assembly:

Step 1: Attach Headboard Legs

Attach the wooden legs to the upholstered headboard using the provided hardware. Ensure they are securely fastened.

Video: Demonstrates the process of attaching the wooden legs to the headboard. This video is provided by HOMBCK, a seller, and shows relevant assembly steps.

Close-up of headboard leg attachment

Image: Close-up view of the headboard leg being attached, showing the connection points and hardware.

Step 2: Assemble Side Rails

Connect the metal side rails to the headboard legs. Ensure the connections are firm.

Image showing side rail attachment to headboard

Image: Illustrates the attachment of the side rails to the headboard, forming the initial bed frame structure.

Step 3: Attach Footboard

Attach the footboard to the assembled side rails. Confirm all connections are secure.

Image of the bed frame with footboard attached

Image: The bed frame with the footboard attached, showcasing the complete frame structure before slats are added.

Step 4: Install Center Support Bar and Legs

Place the center support bar across the width of the frame and attach the support legs. Ensure the legs are stable and evenly distributed.

Image showing the center support bar and legs installation

Image: The bed frame with the center support bar and legs installed, providing central stability.

Step 5: Place Slats

Unroll and place the wooden slats onto the bed frame. Ensure each slat is properly seated in the designated slots or attached as per instructions.

Image of wooden slats being placed on the bed frame

Image: The wooden slats laid across the bed frame, ready to support the mattress.

Video: A comprehensive assembly guide for a similar DG Casa bed frame, demonstrating the full assembly process including slats. This video is provided by DG Casa, the seller.

Usage Guidelines

  • Mattress Compatibility: This platform bed frame does not require a box spring. Place your mattress directly on the slats.
  • Weight Limit: The bed frame is designed to support a maximum weight of 400 pounds.
  • Mattress Thickness: A 10-inch mattress thickness is recommended for optimal comfort and aesthetic.

Care and Maintenance

  • Fabric Cleaning: Clean the boucle fabric with a water-based cleaning product or water-based foam. Test on an inconspicuous area first.
  • Wood Care: Wipe wooden legs with a soft, dry cloth. Avoid harsh chemicals.
  • Regular Checks: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability.

Troubleshooting

  • Missing Parts/Hardware: If any parts or hardware are missing upon arrival, please contact DG Casa customer service immediately for assistance.
  • Slats Not Fitting: In rare cases, slats may seem slightly off. Ensure they are correctly aligned and gently apply pressure to fit them into the frame. Avoid excessive force.
  • Bed Frame Wobbles: Check that all bolts and screws are fully tightened. Ensure the bed is on a level surface.

Product Specifications

Model Number70350-T-BCL
SizeTwin
ColorCream Boucle
Product Dimensions81.3"L x 44.5"W x 48"H
Item Weight72.3 Pounds
Weight Limit400 Pounds
Upholstery Fabric TypeBoucle
Assembly RequiredYes
Special FeatureNo Box Spring Required

Warranty and Support

For any questions, concerns, or warranty claims regarding your DG Casa Boucle Cloud Bed Frame, please contact DG Casa customer service. Refer to your purchase documentation for specific warranty details.

You can also visit the official DG Casa store for more information: DG Casa Store

© 2023 DG Casa. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.