Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your BACHMANN Twist 2 Recessed Socket, Model 946.015. Please read this manual thoroughly before installation and use, and retain it for future reference.
The BACHMANN Twist 2 is a square recessed power strip designed for integration into kitchen, office, or living room furniture. It features one standard power socket and one USB A and one USB C charging port, offering a convenient and discreet power solution.
Product Overview
Figure 1: Front view of the BACHMANN Twist 2 Recessed Socket in its open position, showing one power outlet, one USB-A port (18W), and one USB-C port (22W).
Figure 2: Top view of the BACHMANN Twist 2 Recessed Socket in its closed position, showing the flush surface and the central button for automatic opening.
Setup and Installation
Installation of the BACHMANN Twist 2 requires professional electrical knowledge and should be performed by a qualified electrician. Incorrect installation can lead to electrical shock or fire hazards.
- Preparation: Ensure the power supply to the installation area is disconnected at the main circuit breaker.
- Cut-out: Create a square cut-out in the desired surface (e.g., countertop, desk) according to the dimensions provided in the technical drawing. The required diameter for the main body is approximately 104.5 mm.
- Placement: Insert the Twist 2 unit into the cut-out.
- Securing: Secure the unit from underneath using the provided mounting brackets.
- Wiring: Connect the 2-meter cable to the main power supply according to local electrical codes. The unit is supplied without a power plug, requiring direct wiring or attachment of a suitable plug.
- Testing: Restore power and test the functionality of the socket and USB ports.
Figure 3: Technical drawing illustrating the dimensions and installation requirements for the BACHMANN Twist 2 Recessed Socket. Note the 104.5mm diameter for the main body and overall unit dimensions.
Figure 4: The BACHMANN Twist 2 unit shown with its 2-meter cable, mounting brackets, and an example power plug (not included with the unit) for illustrative purposes.
Operating Instructions
The BACHMANN Twist 2 is designed for ease of use and safety.
- Opening the Socket: To access the power and USB ports, gently press the central button located on the top surface of the unit. The socket mechanism will automatically open, revealing the outlets.
- Closing the Socket: To close the unit, gently push down on the top cover until it clicks into its flush, closed position. Ensure no cables are trapped during closing.
- Power Outlet Usage: Insert standard electrical plugs into the power socket. Ensure devices are within the specified voltage and current limits.
- USB Charging:
- Connect USB-A devices to the 18W USB-A port.
- Connect USB-C devices to the 22W USB-C port.
- The USB ports are suitable for charging smartphones, tablets, and other compatible USB-powered devices.
- Anti-Fingerprint Coating: The surface features an anti-fingerprint coating to maintain a clean appearance with regular use.
Figure 5: A detailed view of the open BACHMANN Twist 2, highlighting the standard power socket, the USB-A port (18W), and the USB-C port (22W).
Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your BACHMANN Twist 2 socket.
- Cleaning: The removable cover facilitates easy cleaning. To clean, gently lift and remove the top cover. Wipe the surface with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish or anti-fingerprint coating. Ensure the unit is completely dry before reattaching the cover and using.
- Inspection: Periodically inspect the unit for any signs of damage, loose connections, or wear. If any damage is observed, discontinue use and consult a qualified electrician.
- Environmental Conditions: Avoid exposing the unit to excessive moisture, direct sunlight, or extreme temperatures.
Troubleshooting
If you encounter issues with your BACHMANN Twist 2, refer to the following common troubleshooting steps:
- No Power from Socket/USB:
- Check if the main power supply to the unit is active.
- Verify that the circuit breaker for the installation area has not tripped.
- Ensure the device connected to the socket or USB port is functioning correctly.
- Socket Not Opening Automatically:
- Ensure the central button is pressed firmly.
- Check for any obstructions preventing the mechanism from opening.
- Slow USB Charging:
- Ensure your device and cable support fast charging.
- Verify that the device is connected to the correct USB port (USB-A 18W or USB-C 22W).
If problems persist after attempting these steps, contact a qualified electrician or BACHMANN customer support for assistance.
Specifications
| Brand | Bachmann |
| Model Number | 946.015 |
| Type | Recessed Socket, Square |
| Outlets | 1x Standard Power Socket, 1x USB-A (18W), 1x USB-C (22W) |
| Cable Length | 2 meters |
| Color | RAL 9010 Pure White |
| Material | Plastic |
| Item Weight | 1.88 pounds (approx. 0.85 kg) |
| Dimensions (LxWxH) | Approx. 0.08 inches (height above surface when closed) |
| Compatible Devices | Smartphone, tablet, laptop, all standard electrical devices |
| Power Plug Type | No Plug (requires wiring) |
Safety Information
- Always disconnect power before installation or maintenance.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Do not exceed the maximum electrical load specified for the socket.
- Do not use in wet or damp conditions unless specifically rated for such environments.
- Keep out of reach of children. The automatic opening feature is designed to deter accidental opening by children, but supervision is always recommended.
- Do not attempt to modify or disassemble the unit.
