Roilpet 6 Pack

Download PDF
Contents

Roilpet 5 Pack Replacement Filters for 3L Cat Water Fountains Instruction Manual

Model: 6 Pack

Introduction

This manual provides essential instructions for the proper use and maintenance of your Roilpet 5 Pack Replacement Filters for 3L Cat Water Fountains. Following these guidelines will ensure optimal performance and longevity of the filters, providing clean and fresh water for your pet.

Compatibility

These replacement filters are specifically designed for use with the Roilpet 3L Cat Water Dispenser (purple model). Ensure your water fountain model matches this compatibility for correct fit and function.

Roilpet replacement filter next to a purple Roilpet 3L cat water fountain, indicating compatibility.

Image: Roilpet filter shown with the compatible purple 3L cat water dispenser.

Package Contents

Each package contains the following items:

  • 5 x Roilpet Replacement Filters (individually packaged)
  • 3 x Roilpet Replacement Pre-filter Sponges
Five Roilpet replacement filters and three pre-filter sponges, with water splashes and leaves, indicating freshness.

Image: Contents of the Roilpet filter pack, including 5 filters and 3 sponges.

Filtration System Overview

The Roilpet replacement filters feature a 4-layer vertical filtration system designed to provide clean, oxygen-rich, and better-tasting water for your pet. This system effectively removes hair, sediment, dirt, and reduces heavy metal ions.

  1. Non-woven Fabric (Layer 1): Filters out hair, sediment, and debris.
  2. Cation Exchange Resin: Reduces heavy metal ions and softens tap water.
  3. Non-woven Fabric (Layer 2): Further filters out hair, sediment, and debris.
  4. Activated Carbon: Purifies and refreshes drinking water, removing odors.
Diagram illustrating the 4-layer vertical filtration system: Non-woven Fabric, Cation Exchange Resin, Non-woven Fabric, and Activated Carbon, with arrows showing water flow.

Image: Detailed diagram of the 4-layer filtration process within the filter.

Setup and Installation

  1. Prepare the Filter: Before first use, soak the new filter in clean water at a temperature between 5°C and 45°C (41°F and 112°F) for approximately 5 minutes. This helps to remove any loose carbon dust and ensures optimal filtration from the start.
    Roilpet filter soaking in a bowl of water, with water droplets visible.

    Image: A Roilpet filter being soaked in water as part of the preparation process.

  2. Remove Old Filter: Disassemble your Roilpet 3L Cat Water Dispenser according to its specific instructions and remove the used filter and pre-filter sponge.
  3. Clean Fountain: Thoroughly clean all parts of the water fountain before installing new filters.
  4. Install New Sponge: Place a new pre-filter sponge into its designated slot in the fountain.
  5. Install New Filter: Insert the prepared replacement filter into the filter tray, ensuring it is seated correctly. Reassemble the water fountain.

Maintenance

Regular replacement of filters and sponges is crucial for maintaining water quality and the health of your pet.

  • Filter Replacement: It is recommended to replace the main filter every 7 to 15 days.
  • Sponge Replacement: Replace the pre-filter sponge at the same frequency as the main filter, or more often if it appears visibly dirty.
  • Increased Frequency: If you have multiple pets using the fountain, or if the water appears dirty more quickly, consider replacing both the filter and sponge more frequently than the recommended interval.

Note: Always clean the water fountain thoroughly each time you replace the filter and sponge to prevent bacterial growth and maintain hygiene.

Troubleshooting

If you encounter issues with water quality or flow after installing a new filter, consider the following:

  • Reduced Water Flow: Ensure the filter is correctly seated and not obstructed. Check if the pre-filter sponge is clean and not clogged.
  • Unpleasant Odor: If the water develops an odor, it indicates the filter needs immediate replacement. Ensure regular replacement intervals are followed, especially with multiple pets.
  • Cloudy Water: This may indicate the filter is saturated or not functioning correctly. Replace the filter and clean the fountain thoroughly.

Specifications

BrandRoilpet
Model Number6 Pack (Refers to product packaging/variant)
Filter Dimensions (Approx.)9.65 cm (L) x 3.05 cm (W) x 1.4 cm (H) / 3.8" x 1.2" x 0.55" (Individual filter)
MaterialNon-woven Fabric, Cation Exchange Resin, Activated Carbon
Filtration Layers4-layer vertical system
Package Contents5 Replacement Filters, 3 Pre-filter Sponges
Recommended ReplacementEvery 7-15 days
Diagram showing the dimensions of a single Roilpet replacement filter: 3.8 inches by 1.2 inches by 0.55 inches.

Image: Dimensions of an individual Roilpet replacement filter.

Customer Support

For further assistance or inquiries regarding your Roilpet replacement filters, please refer to the contact information provided with your original Roilpet 3L Cat Water Dispenser or visit the official Roilpet website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.